细水雾抑制熄灭木材火焰的小尺度实验研究及简化模型

细水雾灭火技术以其环保性好、灭火迅速、耗水量低、破坏性小以及适用面宽等特点 ,已成为国际火灾领域关注研究的热点。以此为工程背景 ,开展了细水雾抑制熄灭木材火焰的小尺度模拟实验研究。利用热电偶测温系统、数码摄像机等仪器测量了细水雾作用前后燃烧场的变化特征。结果表明 :预燃时间、喷雾气压、细水雾作用时间等参数对灭火过程有显著影响。细水雾抑制熄灭木材火焰的主要机理是燃料表面冷却效应。从传热的角度建立的木材表面冷却模型与实验结果吻合较好     

动态膜压法测定江、污混合水体中有机物含量的探讨

用双驱动动态膜压仪测定江、污混合水中有机物含量。通过测定白龙港污水和长江水混合后的膜压和滞回环面积，用它们与相应的经典法CODCr作图，获得了滞回环面积和CODCr之间良好地线性关系，表明用动态膜压法可快速测定混合水中的有机物含量，不须加任何试剂，不会产生二次污染。同时，对实验结果进行了初步的机理探讨。     

An assessment of heavy-metal contamination in surface sediments of the Suez Gulf using geoaccumulation indexes and statistical analysis

An assessment of marine pollution due to metals was made in the Suez Gulf based on surface costal sediment collected from 18 locations along the Gulf. The samples were dried and acid-digested, and the metal contents (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) were determined using a flame atomic absorption spectrophotometer (air-acetylene) with deuterium background correction. An evaluation of the heavy-metal pollution status of the Gulf was carried out using enrichment factors (EF) and geo-accumulation Indexes (I_geo). Also, heavy-metal concentrations in Suez Gulf sediments were evaluated using the Effect Range-Low (ERL) and the Effect Range-Median (ERM). The results of a Spearman correlation and factor and cluster analysis of the heavy metals analysed in the collected sediment were discussed. The main source of contamination is offshore oil field and industrial wastes, which arise due to the ineffective and inefficient operation equipments, illegal discharge and lack of supervision, and prosecution of offenders.     

Environmental issues in Sweden 1973–1989: Science and policy

The aim of this study is to analyze the environmental agenda in Sweden during the last two decades. A content analysis was made of all articles in a Swedish journal,Miljö-Aktuellt. Further, to elucidate the evolutionary process of problem formulation and reformulation, two cases were investigated, dealing with the impact of plant nutrients and mercury on surface water quality. The transport of heavy metals is an essential component of the ecological process and problem of acidification, and similarly, plant nutrients are part of the concept of eutrophication. Two concepts, the research cycle and the policy cycle, are tentatively applied to the conceptualizations of acidification and eutrophication. Additional data for the latter part of the study is supplied from parliamentary motions during 1973–1989. The substance/media focus of the 1970s was connected to a point-source abatement strategy, which mainly aimed at removing negative effects at a local level. The development of a national preventive strategy is traced in problem formulations related to “processes” going on in the technosphere: wastes, noise, energy production, traffic, and toxic substances. This period lasted from the mid-1970s to the mid-1980s, and the need for improved resource management as a means to control environmental problems has been a generally accepted idea. However, this does not mean that measures actually taken are sufficient in a material balance perspective. Further, in the 1980s there was a strong emphasis upon processes in the ecosphere. This focus also implies source-related policies. To a certain extent, the remedies are within the scope of national capabilities, but the international dimension is becoming increasingly important. Scientific proofs of resource and environment degradation are essential to induce political action and to stimulate international cooperation. From this study, however, it is not possible to assess the existence of any particular policy-triggering information.     

Removal of a cationic dye from aqueous solutions by adsorption onto bentonite clay

The ability of bentonite to remove malachite green from aqueous solutions has been studied for different adsorbate concentrations by varying the amount of adsorbent, temperature, pH and shaking time. Maximum adsorption of the dye, i.e. >90% has been achieved in aqueous solutions using 0.05 g of bentonite at a pH of 9. Thermodynamic parameters such as ΔH°, ΔS° and ΔG° were calculated from the slope and intercept of the linear plots of ln K_D against 1/T. Analysis of adsorption results obtained at 298, 308, 318 and 328 K showed that the adsorption pattern on bentonite seems to follow the Langmuir, Freundlih and D–R isotherms. The temperature increase reduces adsorption capacity by bentonite, due to the enhancement of the desorption step in the mechanism. The numerical values of sorption free energy (E_a) of 1.00–1.12 kJ mol⁻¹ indicated physical adsorption. The kinetic data indicated an intraparticle diffusion process with sorption being first order. The rate constant k was 0.526 min⁻¹. The concentration of malachite green oxalate was measured before and after adsorption by using UV–Vis spectrophotometer.     

表面裂纹对Rayleigh波的滤波特性分析

摘要表面裂纹是危害很大且普遍存在的一种缺陷,严重影响到特种设备的安全运行。对表面裂纹尺寸的测量一直未得到很好的解决,由于Rayleigh波能量主要集中在深度一个波长的范围内,当传播过程中和裂纹相互作用时,其频谱会发生变化,一部分高频波将会被吸收,吸收频率的大小与裂纹的深度密切相关。此时裂纹起了一个类似低通滤波器的作用,这点对于裂纹深度检测具有指导意义。     

假单胞菌XD-1(Pseuomonas XD-1)的产表面活性剂性能研究

从含油废水中分离到1株表面活性剂产生菌,经鉴定为假单胞菌(Pseuomonassp.),命名为XD 1.对假单胞菌XD 1的产表面活性剂性能进行研究,实验结果表明,在正交优化的培养基中发酵培养时,菌XD 1可将培养液的表面张力从70 0mN·m-1降至30 2mN·m-1,其产表面活性剂方式为生长相关型;经提取分析,菌XD 1所产表面活性剂为脂肽类和糖脂类物质的混合物,脂肽类物质为主要成分;菌XD 1所产表面活性剂的CMC值为50mg·L-1,在pH=6 0时表面活性剂表现出最佳活性;菌XD 1所产表面活性剂主要积累在胞内特定的细胞器中,并在细胞壁上产生一层粘附的表面活性剂膜,膜厚140nm,在生长过程中,菌体会将细胞器和细胞壁上的表面活性剂释放到胞外.将培养72h的菌体浸入双蒸水中,6h后菌体能把积累在细胞器和细胞壁上的表面活性剂释放到水体中.     

改性ACF－PAN吸附SO_2前后表面结构变化及机机理究

以自制ＰＡＮ－基聚丙烯腈活性碳纤维ＡＣＦ－ＰＡＮ（ＡＣＦ－活性碳纤维、ＰＡＮ－聚丙烯腈）和改性处理的ＡＣＦ－ＰＡＮ吸附ＳＯ_２，借助ＩＲ、ｘ－光电子能谱分析等研究ＡＣＦ－ＰＡＮ改性处理及吸附ＳＯ_２前后表面结构变化。结果表明：各型ＡＣＦ－ＰＡＮ吸附ＳＯ_２的活性中心为表面结构中的含氮官能团以及引入的金属氧化物，其吸附机理是活性氮催化或电子传递。     

REST-Rossendorf expert system for surface and sorption thermodynamics

This paper presents a digitized version of a thermodynamic sorption database, implemented as a relational database with MS Access. It is mineral-specific and can therefore be used for additive models of complex solid phases such as rocks or soils. An integrated user interface helps users to access selected mineral and sorption data, to extract internally consistent data sets for sorption modeling, and to export them in formats suitable for other modeling software. Data records comprise mineral properties, specific surface area values, surface binding sites' characteristics, sorption ligand information, and surface complexation reactions. An extensive bibliography is included, providing links not only to the above listed data, but also to background information concerning surface complexation model theories, evidence for surface species, and sorption experimental techniques.     

Estimation of surface area of montmorillonite by ethylene oxide chain adsorption

This study investigates the feasibility of using ethylene oxide chain adsorption to determine the surface area of an expandable clay, montmorillonite. Experimental results indicate that high molecular weight poly(ethylene oxide) or nonionic surfactant with long ethylene oxide chain should be used to provide reasonable estimations for monolayer capacity. The method has advantages over Brunauer, Emmett, and Teller method in that it is readily applicable to a wide range of areas, particularly to 2:1 layer silicates under aqueous conditions.