Anaerobic decolorization of an azo dye by a mixed culture

Wool dyeing wastewater contains xenobiotic compounds that can be removed by biotechnological processes. Studies on various dyes showed that anaerobic processes are suitable to alter azo dyes as a first step of the biodegradation process. These compounds are reduced by anaerobic consortia to aromatic amines and its ultimate degradation can be achieved by a further aerobic treatment.

Studies on degradation rate of an wool acid dye were performed in batch systems inoculated with anaerobic biomass. A commercial diazo dye, Acid Red 73, was added to the synthetic medium in which glucose was used as sole carbon source.

Results indicated that the Acid Red 73 was partially degraded by a mixed culture of anaerobic bacteria and a decolorization of 90% was obtained. Kinetics studies on removal of the colour showed that the decolorization rate was several times faster than the degradation rate of glucose for a range of dye concentrations between 60 mg/L and 400 mg/L. A first order kinetic model was used for dye concentrations up to 200 mg/L. For higher concentrations a model similar to the Michaelis‐Menten equation was better fitted to the experimental data.     

Removal of textile dyes from aqueous solution using PEG based aqueous biphasic system

Aqueous biphasic systems (ABSs) composed of polyethylene glycol (PEG) and salt have been examined for the removal of textile dyes from textile effluent. The partitioning of four dyes namely Cibacron Scarlet LS 2G, Rhodamine B, Brown ERN and Astacryl Red 3B was investigated. All the dyes studied were found to partition into the upper PEG rich layer. Sodium carbonate was found to be the most efficient salt for extraction of dyes. Sodium sulphate was found to be marginally less efficient. Sodium chloride did not cause partitioning at all. Partitioning occurred at all pH and was almost pH independent. The partitioning of these dyes in larger volume (100?mL) ABS was also demonstrated. Studies using dye bath effluent were also conducted. In all cases very high efficiencies consistently above 98% were obtained.     

Screening of textile finishing agents available on the Chinese market: An important source of per- and polyfluoroalkyl substances to the environment

Kendrick mass defect was used for PFASs screening in textile finishing agents (TFAs). Total oxidizable precursor assay provides insight into unknown precursors. Perfluorooctane sulfonate was found as impurity in short ECF technology based TFAs. Perfluorooctanoate was also detected in C6 telomerization based TFAs. Long chain precursors were also observed in both types of TFAs. Organofluorinated surfactants are widely employed in textile finishing agents (TFAs) to achieve oil, water, and stain repellency. This has been regarded as an important emission source of per-and polyfluoroalkyl substances (PFASs) to the environment. China is the biggest manufacturer of clothes, and thus TFA production is also a relevant industrial activity. Nevertheless, to date, no survey has been conducted on PFAS contents in commercially available TFAs. In the present study, TFA products were investigated by the Kendrick mass defect method. The quantification results demonstrated a significant presence of perfluorooctane sulfonate (0.37 mg/L) in TFAs manufactured by electrochemical fluorination technology. The products obtained by short-chain PFAS-based telomerization were dominated by perfluorooctanoic acid (mean concentration: 0.29 mg/L), whose values exceeded the limits stated in the European Chemical Agency guidelines (0.025 mg/L). Moreover, the total oxidizable precursor assay indicated high levels of indirectly quantified precursors with long alkyl chains (C7–C9). Together, these results suggest that there is currently a certain of environmental and health risks in China that originates from the utilization of TFAs, and a better manufacturing processes are required to reduce such risks.     

Bisolute Equilibrium Studies for the Sorption of Basic Dyes on a GAC from Almond Shells: A Nonlinear Approach

Aqueous phase adsorption of three textile dyes onto a granular activated carbon produced from acid activation of almond shells is presented. Primarily, the sorption of three basic dyes, methylene blue, rhodamine b, and malachite green oxalate were studied. Four models, the Freundlich, the Langmuir, the Redlich-Peterson, and the Toth isotherms were compared for their quality of fit to the single-solute sorption data. Next, sorption of the three likely binary systems was examined. Four bi-solute models, the extended Langmuir with and without an interaction term, the extended Redlich-Peterson with an interaction term, and the empirical extended Freundlich model were used to predict sorption in the binary systems. Nonlinearly determined constants of the corresponding single-solute isotherms were used in the binary models to compare with experimental binary sorption data. For the single-solute system, the three-parameter models of the Redlich-Peterson and the Toth isotherms outperformed the Langmuir and Freundlich models. The empirical extended Freundlich model produced the closest comparison to the binary data in each system. In general, the nonlinear method provided a simple and computationally effective technique of producing optimal fitting parameters for the bi-solute sorption models.     

Development of environmental performance indicators for textile process and product

The increasing demand for environmental performance evaluation of industry requires development of sector-specific environmental performance indicators (EPIs). For the consumer product manufacturing industry, in this case the textile industry, the need to evaluate environmental performance both from process and product life cycle perspectives leads to development of EPIs of process and product dimensions. Such types of EPIs have been developed, with best achievable values being identified, by this study for cotton woven products and wet processing. An in-depth discussion has been presented concerning problems in developing and applying EPIs, while areas for further research are also recommended.     

Influence of short-term irrigation of textile mill wastewater on the growth of chickpea cultivars

The effect of textile mill wastewater on germination, delay index, physiological growth parameters, and plant pigments of two cultivars of chickpea was studied. The aim of this study was to evaluate the suitability of textile mill wastewater (treated and untreated) at different concentrations (0, 6.25, 12.5, 25, 50, 75, and 100%) for irrigational purposes. The textile effluent did not show any inhibitory effect on seed germination at a lower concentration (6.25%). The other reported plant parameters (delay index, root length, shoot length, dry weight, chlorophyll, and carotenoid) also followed a similar trend. Seeds germinated in 100% effluents but did not survive for longer periods. It has also been concluded that the effect of the textile effluent is cultivar-specific, and due care should be taken before using the textile mill wastewater for irrigation purposes.     

Combining product engineering and inherent safety to improve the powder impregnation process

The functionalization of nonwoven textiles can be realized by dry powder impregnation. In order to develop and improve this process, two complementary approaches have been combined: product engineering and inherent safety. It consists in integrating ab-initio consumers' requirements, production constraints as well as safety and environmental considerations. This case study is focused on the proposal, the characterization and the selection of powders mixtures of flame retardants and copolyesters, which will be used to create fire-proofed textiles. The influences of the chemical natures of the flame retardant (e.g. calcium carbonate, aluminium trihydroxide, ammonium polyphosphates), their respective concentrations, particle diameters and the addition of silica to flame retardant/polymer mixtures on their minimum ignition energy has been investigated. It has been determined that ammonium polyphosphates are far more efficient than other flame-retardants and that a minimum of 20%wt. concentration is needed to generate a powder mixture that will be almost insensitive to ignition by an electrostatic source. Modifying the particle size distribution and introducing glidants play also a significant role on flame retardant/polymer interactions, on powder dispersibility and has a strong impact on the minimum ignition energy. Finally, the formulations which have been selected fulfill the requirements for fire resistance, flowability, prevention of dust explosion; they are non-toxic, environmentally friendly and their cost is reduced.     

Photocatalytic oxidation of the textile dye basic red 18 with irradiated titanium dioxide

One of the major problems of textile wastewater is the presence of dye materials, because colour is visible to the public even if the dye concentration is lower than other pollutants, and needs therefore to be removed from the wastewater before it is discharged. Techniques based on “advanced oxidative processes” such as photocatalysed oxidation seem to be very promising for industrial wastewater treatment, especially for decolourization of textile effluents. In this work, we describe the photocatalytic degradation of the textile dye Basic Red 18 (BR 18) in aqueous solution using two different types of TiO₂ as photocatalyst: Degussa P25 (80% anatase) and Framitalia (100% anatase). Photooxidation of BR 18 was followed by HPLC analysis, and kinetic parameters were evaluated in order to optimise the treatment procedure. The results obtained in this work showed that the colour became virtually zero and the chemical oxygen demand (COD) is strongly reduced at the end of the treatment. The obtained results are compared with the efficiency of decolourization using the H₂O₂/UV System. Finally, marine mussel test was used to evaluate the efficiency of photocatalytic oxidation with TiO₂ in terms of ecotoxicity. A significant reduction of cumulative mortality was observed for the treated effluent.     

抗静电纺织品的测试标准浅析与探讨

本文阐述了目前抗静电纺织品的发展现状和主流开发技术路线,结合常用的纺织品抗静电性能测试方法和技术,浅析了目前我国的抗静电纺织品检测标准和方法,探讨了一些技术细节和常见问题。     

复合催化电解法处理染料工业废水

采用复合催化电解法对染料工业废水的处理进行了研究,并获得相应的工艺参数。试验结果表明,复合催化电解法能有效地处理染料工业废水,在电解电压10V、电流0.1A、电解时间1.5h的条件下,催化电解能使废水COD_Cr去除率达到87.5％～90％,脱色率达99％～100％。复合催化电解法具有操作简便、能耗较低等特点,是处理染料工业废水的一条新途径