Automated energy management in distributed electricity systems: An EEPOS approach

The increasing capacity of distributed electricity generation brings new challenges in maintaining a high security and quality of electricity supply. New techniques are required for grid support and power balance. The highest potential for these techniques is to be found on the part of the electricity distribution grid.

This article addresses this potential and presents the EEPOS project’s approach to the automated management of flexible electrical loads in neighborhoods. The management goals are (i) maximum utilization of distributed generation in the local grid, (ii) peak load shaving/congestion management, and (iii) reduction of electricity distribution losses. Contribution to the power balance is considered by applying two-tariff pricing for electricity.

The presented approach to energy management is tested in a hypothetical sensitivity analysis of a distribution feeder with 10 households and 10 photovoltaic (PV) plants with an average daily consumption of electricity of 4.54 kWh per household and a peak PV panel output of 0.38 kW per plant. Energy management shows efficient performance at relatively low capacities of flexible load. At a flexible load capacity of 2.5% (of the average daily electricity consumption), PV generation surplus is compensated by 34–100% depending on solar irradiance. Peak load is reduced by 30% on average. The article also presents the load shifting effect on electricity distribution losses and electricity costs for the grid user.     

Techno-economic and environmental analysis of an integrated standalone hybrid solar hydrogen system to supply CCHP loads of a greenhouse in Iran

The techno-economic and environmental performance of hybrid solar hydrogen energy systems was investigated to provide combined cooling, heating and power (CCHP) demands of a standalone greenhouse in Iran to achieve sustainable agriculture based on an optimization procedure. From the environmental point of view, by deploying hybrid energy systems, 83%, to 100% of emissions can be avoided. Also a sensitivity analysis was performed on the hybrid energy systems in order to study the effect of major parameter variation on the systems justification. It was concluded that hybrid solar systems are economically competitive with conventional systems, for high solar intensity locations with high diesel fuel prices and decreased prices for PV and hydrogen storage technology.     

The impact of the electricity tariff reform on renewable energies and energy efficiency investments: The case of the Italian residential market

This article investigates the impact that the electricity tariff reform is likely to have on investments in renewable energies (i.e., photovoltaics) and the adoption of energy efficiency measures (i.e., installation of heat pumps and efficient home appliances) in the residential market in Italy. The study develops detailed cost comparisons and simulations considering two different investment scenarios (before and after the reform) to conclude that the reform will: (i) have a negative impact on investments in photovoltaic systems; (ii) favor the adoption of energy efficiency measures, such as efficient home appliances.     

Application of treated wastewater and digested sewage sludge to obtain biodiesel from Helianthus annuus L. seeds oil

Waste from wastewater treatment plants (WWTP) for Helianthus annuus L. production may be a viable solution to obtain biodiesel. This study achieved two objectives: assess the agronomical viability of waste (wastewater and sludge) from the Alcázar de San Juan WWTP in central Spain for H. annuus L. production; use H. annuus L. seeds grown in this way to obtain biodiesel. Five study plots, each measuring 6 m × 6 m (36 m²), were set up on the agricultural land near the Alcázar de San Juan WWTP. Five fertilizer treatment types were considered: drinking water, as the control; treated wastewater; 10 t ha^?1 of air-dried sewage sludge; 20 t ha^?1 of air-dried sewage sludge; 0.6 t ha^?1 of commercial inorganic fertilizer. Soil, irrigation water, sewage sludge, crop development and fatty acid composition in achenes oil were monitored. The 20 t ha^–1 dose of sewage sludge proved effective to grow H. annuus L. with similar results to those grown with a commercial fertilizer. However, precautions should be taken when irrigating with wastewater because of high salinity and nutrient deficiency. Sunflower oil was composed mostly of linoleic and oleic acid. The remaining fatty acids were linolenic, estearic, nervonic, palmitoleic, and palmitic.     

Comparison of the daily global solar radiation from different data sources in Northwest China climate

The solar radiation data are of high importance to the solar energy systems. Conventional methods to obtain the solar radiation data are from weather stations, solar radiation models, commercial software databases, and field measurements. In the present study, a new daily global solar radiation model is proposed, by combining the quadratic function of sunshine fraction and sine function of the day of the year. The solar radiation model calculated data are then compared with China Meteorological Data Sharing System (CMDSS) data, TRNSYS data, and field-measured data in Northwest China climate. It is found that the newly proposed solar radiation model has better performance than the other nine solar radiation models in the literature. The solar radiation model calculated data fit well with the CMDSS annually average data. The TRNSYS data are a bit larger than the CMDSS annually average data in summer half year and a little smaller than those in winter half year. The solar radiation model and the CMDSS annually average data have the best correlation, whereas the TRNSYS data and the field-measured data have the worst correlation. The solar radiation model calculated data have the best correlation with the other three data sources.     

Experimental investigations on regeneration energy and energy management strategy in series hydraulic/electric synergy system

This research work draws an insight into the experimental investigations on a series hydraulic/electric synergy system—a green transportation system. An experimental test rig of the system with all necessary sensors and instrumentation has been developed to study the energy saving through hydraulic regenerative braking. The effect of various system parameters, such as braking time, maximum accumulator pressure, pre-charge pressure of hydro-pneumatic accumulator, volumetric displacement of the hydraulic master pump, and hydraulic regeneration pump on the quantum of regeneration energy, was analyzed. In addition, an AMESim model of the real-time experimental test rig has been developed and validated with experimental results. A set of five different experimental designs (parameter variations) of the system is defined with the available standard component sizes. The best design is selected of the available experimental designs based on the maximum hydraulic regeneration energy and regeneration efficiency. It was observed that the selected design has an energy efficiency of 13.3% and a regeneration efficiency of 43.8%. An accumulator-centric control strategy for energy management is developed and implemented on the experimental test rig configured with the selected design. The effectiveness of the control strategy is tested through experiments and simulation on the developed test rig.     

Urban sustainable energy development: A case study of the city of Philadelphia

Cities throughout the world are key sites for energy sustainability activities. However, analysis of such efforts to date has focused on a sub-set of atypical cities: early adopters and/or world cities. This article undertakes a case-study analysis for an ordinary city, Philadelphia, PA in order to assess the extent to which prior research provides adequate policy explanation for ordinary cities and to gain empirical insight on two under-researched aspects: policy actors, and the policy-making and implementation sites (action sites) for urban energy sustainability. Overall, the types of policy drivers, modes of governance, and enabling factors and barriers in the Philadelphia case fit with prior studies. Focusing on actors and action sites, however, offers insight on the city’s relative policy-making approach based on “non-controversy”, the key role of third-sector actors in both policy-making and implementation, and the diversification of action sites through external-level policy-making operationalised locally nevertheless at the expense of reduced control by urban actors. These findings lead to recommendations for urban energy sustainability research and practice.     

Blowing policy bubbles: rethinking emissions targets and low-carbon energy policies in the U.K.

The issue of proportionality is central to climate policy debates about setting targets for the reduction of greenhouse gas emissions and the development of low-carbon energy. In effect, these debates centre on whether the perceived social costs outweigh the benefits of policies and, if not, whether this may lead to over-investment or ‘policy bubbles’. Political attention, agenda setting and policy image are all crucial drivers of ambitious policy formation, as seen in the case of the United Kingdom's (U.K.) Climate Change Act (2008). However, as political salience waned and economic depression dragged on, the cost of long-term climate targets has been reconsidered. Based on documentary analysis and 33 interviews with central political actors, this article presents a detailed account of how economic arguments have been used to reinterpret and challenge policies, using the heuristics of ‘over-investment’ and ‘policy bubbles’. Ultimately, arguments about proportionality hinge on which costs and benefits are considered. In the U.K., economic and technical framings are typically prioritised, but they do not explain contradictory and politically motivated policy decisions. We discuss these dynamics within the context of maturing renewable energy technologies, high energy prices and the U.K.’s cross-party consensus approach to climate politics.     

强化生物通风修复过程中柴油衰减规律及其影响因素研究

强化生物通风技术对于修复因地下储油罐泄漏引起的土壤污染具有很大的应用前景。通过室内土柱模拟柴油泄漏污染土壤,从土柱中总石油烃（total petroleum hydrocarbon,TPH）剖面分布随时间的变化及降解模式角度,分析了其自然衰减和强化生物通风过程。结果表明：初始柴油浓度直接影响着各柱在自然衰减和强化生物通风过程中柱内的残余TPH平衡分布曲线的形状和浓度峰值位置;在前期自然衰减过程中（约1个月）,当土壤中的柴油浓度为5 000～40 000 mg油/kg土时,整个柱内TPH变化的主要原因是重力扩散迁移的结果;当土壤中的柴油浓度≤5 000 mg油/kg土时,其TPH的变化不仅是重力扩散迁移作用的结果,生物降解作用也存在;通风约2个月后,抽提作用对于保持土柱上部柴油浓度稳定变化的意义较为突出。     

基于超临界水氧化过程的能源环境系统设计

阐述了超临界水氧化过程的工艺路线,介绍了超临界水氧化过程的特点,提出了基于超临界水氧化过程的能源环境系统,设计了几种热量与能量回收系统程的耦合工艺,为提高超临界水氧化过程的经济性奠定了基础。