新型烟囱节能、环保、防腐技术特征分析

对新型烟囱技术特征和流场结构的分析认为:由于切向进气,烟气形成旋涡,流动阻力低于普通烟囱,压力损失减少,所以更节能;流场中心形成负压,水、雾等比尘粒小,但比空气大(重)的轻质组分集中在中轴地带随烟气排出,不会腐蚀内壁;因为旋涡流动的存在,提升了烟气排放高度,有更好的环保效果.     

CO2 storage capacity estimation: Methodology and gaps

Implementation of CO₂ capture and geological storage (CCGS) technology at the scale needed to achieve a significant and meaningful reduction in CO₂ emissions requires knowledge of the available CO₂ storage capacity. CO₂ storage capacity assessments may be conducted at various scales—in decreasing order of size and increasing order of resolution: country, basin, regional, local and site-specific. Estimation of the CO₂ storage capacity in depleted oil and gas reservoirs is straightforward and is based on recoverable reserves, reservoir properties and in situ CO₂ characteristics. In the case of CO₂-EOR, the CO₂ storage capacity can be roughly evaluated on the basis of worldwide field experience or more accurately through numerical simulations. Determination of the theoretical CO₂ storage capacity in coal beds is based on coal thickness and CO₂ adsorption isotherms, and recovery and completion factors. Evaluation of the CO₂ storage capacity in deep saline aquifers is very complex because four trapping mechanisms that act at different rates are involved and, at times, all mechanisms may be operating simultaneously. The level of detail and resolution required in the data make reliable and accurate estimation of CO₂ storage capacity in deep saline aquifers practical only at the local and site-specific scales. This paper follows a previous one on issues and development of standards for CO₂ storage capacity estimation, and provides a clear set of definitions and methodologies for the assessment of CO₂ storage capacity in geological media. Notwithstanding the defined methodologies suggested for estimating CO₂ storage capacity, major challenges lie ahead because of lack of data, particularly for coal beds and deep saline aquifers, lack of knowledge about the coefficients that reduce storage capacity from theoretical to effective and to practical, and lack of knowledge about the interplay between various trapping mechanisms at work in deep saline aquifers.     

节能减排 实现钢铁企业可持续发展

通过对钢铁行业消耗水资源及产生污染情况进行分析，阐述了目前钢铁行业为节能减排而采取的管理、技术、污染治理措施，以达到减少废水外排量、降低污染物浓度、降低新水消耗的目的，对钢铁行业废水回用中尚存和潜在的工艺、设计问题进行了讨论，同时提出了通过清洁生产、优化工艺结构来解决问题的措施和建议，确立了企业近期和长期的节能减排任务目标。     

Planar detonation structure for chain-branching kinetics with large activation energy and small initiation rate

The structure of the steady planar detonation wave is analyzed for three-step chain-branching kinetics consistent with hydrogen–air chemistry. The initiation and chain-branching steps are described by an Arrhenius rate. Both are thermally neutral, so that heat release is due to termination. The initiation rate is typically very low and very stiff. As a result, a small fraction of the reactant is consumed in the initiation region, which is very long but ends in an exponential chain-branching explosion. Next, the reactant is rapidly converted into chain-branching radicals, within a very thin zone, which ends when the concentration of the chain-branching radical reaches a peak, because of reactant depletion. Finally, the termination step consumes the chain-branching radicals and releases heat within a region thicker than the peak zone, but much thinner than the initiation region. The analysis is based upon two assumptions: that the chain-branching activation energy is high and that initiation is slow. The structure of the initiation and chain-branching zones is different for post-shock states within or outside the explosion region in the chain-branching diagram. In the former situation, chain-branching is already stronger than termination at the von Neumann point, and vice versa. In the no-explosion case, the initiation zone becomes very long, while the little chain-branching specie produced by initiation is directly converted into product by the termination step. Temperature increases slowly until reaching the explosion curve, when chain-branching becomes stronger than termination. The subsequent structure is similar to the explosion case.     

Influence of the oxide content on the ignition energies of aluminium powders

Some results of determination of ignition energies for an aluminium powder with various oxide contents are presented. Common use of processes like high-speed cutting produce explosive dust clouds, so that we focused this study on hazard of metallic powders. An industrial aluminium powder has been used for this work. An original process, based on the principle of electrochemical anodisation, has been developed to increase, under control, the oxide coating of particles.

The sensitivity study to spark ignition was performed in an Hartmann explosion tube of 1.3L. The Langlie test method was applied to evaluate the energies leading to a probability of ignition of 50% (E₅₀) of the selected samples. The results confirm that the ignition energies increase with the oxide content of the powder.     

Integrated model for renewable energy planning in Turkey

All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements.     

OPTIMAL WATER USE AND SALINITY CONTROL FOR ENERGY - UPPER COLORADO RIVER BASIN1

ABSTRACT: The Upper Colorado River Basin contains appreciable amounts of undeveloped fuel resources. Large quantities of oil shale, coal, and uranium have attracted recent economic and commercial interests. Development of these resources and subsequent conversion to alternative energy forms require an adequate supply of water. Water use for large scale energy development will place increasing demands on an already overstressed allocation of Colorado River water. Present water quality is at a concentration where increased salinity will result in economic detriments to holders of downstream water rights. The salt and water exchange in mining, processing, and spent fuel disposal processes has been incorporated as part of a two-level minimum cost linear programming algorithm. Mathematical simulation results provide an optimal use of Upper Colorado River water for levels of energy output such that salinity concentrations are maintained below predetermined levels.     

PHREATOPHYTE EVAPOTRANSPIRATION AND ITS POTENTIAL REDUCTION WITHOUT ERADICATION1

ABSTRACT: The continuous availability of ground water to riparian phreatophytic vegetation results in large evapotranspiration (ET) losses in summer. Chemical or physical eradication of this vegetation can have undesirable environmental side effects. Spraying phreatophyte foliage with a nontoxic antitranspirant (AT) may reduce transpiration without eradication. Transpiration rate per unit leaf area was similar for several phreatophyte species, but ET per unit land area of phreatophytes depneds more on stand density than species. The mean ET for saltcedar in June was 8.1 mm/day measured by Bowen ratio, compared with 7.9 mm by lysimeters. ATs and growth-retardants reduced transpiration by over 50 percent in laboratory tests where foliage was thoroughly sprayed. In the field AT sprayed by a back-pack mistblower reduced ET by 20–35 percent initially and 10 percent after a month. No ET reduction occurred when AT was sprayed by helicopter on saltcedar, because excessive droplet size and heavy salt deposits on the foliage resulted in poor spray adherence. Wax-based AT was relatively nontoxic to fish and wildlife. Dissolved oxygen could be reduced for aquatic life, but further AT dilution in streams and ponds would minimize this. Helicopter spraying may affect bird nests and egg hatchability. Although ATs significantly reduce ET, their high cost and spraying difficulties preclude current use on phreatophytes. With improvement they may economically help to conserve water in riparian areas in future years.     

WATER BUDGET COMPUTATION FOR A SHALLOW LAKE-LAKE OKEECHOBEE,FLORIDA1

ABSTRACT: The water budget computation in shallow lakes is complicated because marsh vegetation can transpire large quantities of lake water. Thus, a model including the marsh zone evapotranspiration (WET) was developed to compute the water budget for Lake Okeechobee. Three periods of testing (1969–74), planning (1963–74), and recorded period (1952–77) were used to compare the differences of the sum of storage deviation between the WET and conventional methods (WOET). Results of the WOET method showed that the sum of stage deviations were 87.42 cm (2.868 ft.), 231.80 cm (7.605 ft.), and 284.50 cm (9.333 ft.) in the testing, planning, and recorded periods, respectively. These stage deviations are equivalent in the same order to 29, 76, and 93 percent of the lake volume. In general, the WET method not only was applicable to compute the water budget for the lake but also reduced the sum of storage deviation by about 42, 31, and 49 percent, respectively, in those three periods. The storage deviation in WET method was reduced on an average to about 2 percent each year in all three periods, and the deviations were scattered more randomly than in WOET.     

Health and safety implications of alternative energy technologies. I. Geothermal and biomass

An evaluation of potential occupational and public health aspects of geopressure, hydrothermal, hot dry rock, silviculture, crop and animal residues, fermentable plant products, municipal waste, and plantation energy technologies has been performed. Future development of these energy options in the United States will contain hazards that could easily be eliminated by safer equipment design and common-sense attention to operation and maintenance. Occupational exposure to hydrogen sulfide gas occurs near all geothermal sites and wherever organic matter decomposes anaerobically. Respiratory damage has occurred to laborers in geothermal fields, while farm workers have been fatally overcome when employed near agitating liquid manure systems. However, the most frequent and severe of reported injuries to geothermal workers is dermal exposure to caustic sludges produced by H₂S abatement systems.Principal health and safety considerations of biomass pathways are directly related to the diffuse nature of solar energy fixation by photosynthesis and subsequent transfer to animal food chains. Since the potential fuel is in an unconcentrated form, cultivation, harvest, and transport are necessarily laborintensive. Thus, a significant potential for occupational injuries and fatalities exists. Of all biomass systems evaluated, direct burning of solid fuels presents the greatest public health risk. Data are presented to characterize the population at risk and the frequency and severity of injuries.Operated by Union Carbide Corporation under contract W-7405-eng-26 with the U.S. Department of Energy.