MICRO-RELIEF SURFACE DEPRESSION STORAGE: ANALYSIS OF MODELS TO DESCRIBE THE DEPTH-STORAGE FUNCTION1

ABSTRACT: Micro-relief surface depression storage is one of the components of the rainfall-runoff process. The quantification of surface depression storage values and a depth-storage model to describe the storage was the subject of this study. Point measurement data were collected on 258 surfaces of 5 soils and three artificial surfaces. Five methods of computing storage, 15 depth-storage models, two depth increments, and six grid spacings were investigated. The 1-inch grid computational method, 0.1-inch depth increment, and 1-inch grid spacings were recommended. The surface depression storage function is best described by the model S = aD^b, which relates surface depression storage as a function of depth with two equation parameters. Equations for describing the surface depression storage model parameters have been developed.     

MANAGEMENT ASPECTS OF CYCLIC STORAGE OF WATER IN AQUIFER SYSTEMS1

ABSTRACT: Most of California's precipitation falls at the wrong place in the wrong season in relation to the water needs. Redistribution and regulation are essential. Aquifer systems – groundwater basins – can provide a share of the future cyclic storage regulation. There are some differences in management concepts in using a full basin in comparison with a partially dewatered basin. Legal, water quality, and physical impacts on aquifer systems, including subsidence, are concerns. Storage may be for the benefit of overlying water users or for distant areas. Extraction during dry periods or recharge methods will require careful planning. Existing rights and uses and equitable treatment of all parties must be assured. Financial compensation may be involved. Changes in methods of operation or degree of self-determination by affected water agencies will require committed watermanship to resolve. Legislation or amendments to organic acts may be needed but much can be accomplished within existing statutes. Environmental impacts which can be avoided by not using large surface storage sites are important. Energy for pumping will be a key consideration. About 40 percent of California is underlain by aquifer systems. This resource offers major potential in overcoming the maldistribution of natural water resources.     

SOCIAL OVERHEAD CAPITAL COSTS OF IRRIGATION DEVELOPMENT IN WASHINGTON STATE1

ABSTRACT: Increased irrigation as a means of achieving economic development can impose significant social costs on the state or region of growth. The growth in population induced by additional irrigation will require new roads, water and sewage facilities, schools, fire and police protection, etc. Also the increased energy demands due to irrigation and growth in economic activity must be met. Capital investments required to service these needs of new development can become very large. This study attempts to measure such social overhead costs or irrigation development for some specific irrigation project areas of Eastern Washington. It is shown that investment costs in overhead items can reach $2,000 per acre irrigated or $70,000 per job created. Alternatively, the annual costs can equal $180 per acre or $6,700 per worker. These costs must be paid locally through increased taxes, utility rates, or costs for services.     

DETERMINATION OF SEDIMENT YIELD BY TRANSFERRING RAINFALL DATA1

ABSTRACT: A methodology for obtaining the optimal design value to allow for sediment storage in a reservoir is presented for the situation where no data on sediment loads in the incoming streams are available. Information concerning the amount of sediment delivered to the reservoir over its life-time is obtained by a sediment yield model which uses data on rainfall amount and duration obtained from a nearby experimental watershed. Bayesian Decision Theory is used to obtain the optimal storage requirements in order to consider the natural variation of rainfall and the sampling error due to the short rainfall record available. The normally difficult calculations involved were made tractable by the use of simplifications and approximations valid in the context of the problem. Results show that sediment storage requirements can be calculated in this manner and that consideration of the uncertainties involved leads to a storage requirement substantially larger than that calculated without such consideration.     

Organizational and Political Considerations in the Municipal Development of Small Hydropower1

ABSTRACT: The potential for hydroelectric power development at existing dams is great in oil dependent New England where there are over 10,000 dams presently in existence. Over 400 developments have been proposed in the region, the majority of which are small scale, and do not have major environmental impacts. Nevertheless, a variety of constraints may hinder development. A study of three efforts by municipalities in unique positions to develop hydropower reveals that organizational and political considerations are significant factors affecting development. Successful hydropower development requires: (1) the cooperation and interaction of citizens, government, and the private sector; (2) community interest and education; and (3) strong resolve.     

Thermal and hydrometallurgical recovery methods of heavy metals from municipal solid waste fly ash

Heavy metals in fly ash from municipal solid waste incinerators are present in high concentrations. Therefore fly ash must be treated as a hazardous material. On the other hand, it may be a potential source of heavy metals. Zinc, lead, cadmium, and copper can be relatively easily removed during the thermal treatment of fly ash, e.g. in the form of chlorides. In return, wet extraction methods could provide promising results for these elements including chromium and nickel. The aim of this study was to investigate and compare thermal and hydrometallurgical treatment of municipal solid waste fly ash. Thermal treatment of fly ash was performed in a rotary reactor at temperatures between 950 and 1050 °C and in a muffle oven at temperatures from 500 to 1200 °C. The removal more than 90% was reached by easy volatile heavy metals such as cadmium and lead and also by copper, however at higher temperature in the muffle oven. The alkaline (sodium hydroxide) and acid (sulphuric acid) leaching of the fly ash was carried out while the influence of temperature, time, concentration, and liquid/solid ratio were investigated. The combination of alkaline-acidic leaching enhanced the removal of, namely, zinc, chromium and nickel.     

On the confluence of city living,energy saving behaviours and direct residential energy consumption

The purpose of this study is to shed light on the connection between income, dwelling type, tenure type and city living, in terms of both a household’s energy saving behaviours and direct residential energy consumption. This study employs data from the Household Energy Consumption Survey, Australia. Using a seemingly unrelated regression (SUR) system of equations the results reveal some key mechanisms which may allow householders to realise lower levels of energy consumption and hence lower carbon emissions. The results indicate that there are characteristics unique to living in a city that are linked to higher levels of direct residential energy consumption. On a number of measures (e.g. household income, tenure type and dwelling type), the results point to a lower likelihood of engaging in energy saving behaviours in cities. Also, depending on the number of energy saving behaviours, these actions have the potential to more than offset higher direct residential energy consumption of householders residing in separate houses. Coupled with these findings renters, a more vulnerable social group, are found to be significantly disadvantaged, suffering from a much lower adaptive capacity. Specifically, householders who rent their home are 77% less likely to have solar electricity. A result which may reflect differences in access to opportunity. Further, householders who rent are less likely to engage in energy saving actions. A finding which may reflect difference in ontological security and the greater psychological burden associated with undertaking energy saving behaviours (a barrier) borne by renters not shared with home owners.     

Exploration of the metabolic flexibility of glycogen accumulating organisms through metatranscriptome analysis and metabolic characterization

Glycogen accumulating organisms (GAOs) are closely related to the deterioration of enhanced biological phosphorus removal systems. However, the metabolic mechanisms that drive GAOs remain unclear. Here, the two-thirds supernatant of a reactor were decanted following the anaerobic period to enrich GAOs. Long-term monitoring demonstrated that the system was stable and exhibited typical characteristics of GAOs metabolism. Acetate was completely consumed after 60 min of the anaerobic phase. The level of glycogen decreased from 0.20 to 0.14 g/gSS during the anaerobic phase, whereas the level of glycogen significantly increased to 0.21g/gSS at the end of the aerobic period. Moreover, there was almost no phosphate release and absorption in the complete periods, thus confirming the successful construction of a GAOs enrichment system. Microbial community analysis demonstrated that Ca. Contendobacter was among the core functional genera and showed the highest activity among all of the communities. Furthermore, our study is the first to identify the involvement of the ethyl-malonyl-CoA pathway in the synthesis of polyhydroxyvalerate via croR, ccr, ecm, mcd, mch and mcl genes. The Embden-Meyerhof-Parnas (EMP) pathway was preferentially used via glgP. Furthermore, the glyoxylate cycle was the main source of ATP under anaerobic conditions, whereas the tricarboxylic acid cycle provided ATP under aerobic conditions. aceA and mdh appeared to be major modulators of the glyoxylate pathway for controlling energy flow. Collectively, our findings not only revealed the crucial metabolic mechanisms in a GAOs enrichment system but also provided insights into the potential application of Ca. Contendobacter for wastewater treatment.     

陆缘伸展区的地震激发机制

江苏所处的中国东部被当代横贯欧亚的北西西向环球螺旋形扭转断裂带（其东段即大别—舟山断裂）分割为南部的褶皱山带隆升区和北部的沉降区。软流圈从太平洋方向面楔入北部区，使该区岩石圈减薄，陆壳向海洋伸展、离裂，产生郯庐断裂等具有直扭性质的近南北向软流（及地幔）底辟，并伴随有多层水平拆离面，所见为高导低速的水平破裂带。绝大多数地震沿着其中埋深１５ｋｍ（±５ｋｍ）的第一水平破裂带发生，使北部区成面积性地震区。结合高压物性实验所得的岩石微破裂规律（…分割—错位—嵌合—再分割…）判断得知，水平破裂带中的膨胀增厚部分的流体处在超压状态而成为储能体，在陆壳伸展运动中会突然释放能量而诱发地震。因此，根据已有实际分析认为：强震和频震区的发展的必要条件是软流楔入和陆壳伸展，而其充分条件是储能体在软流冲击和增温效应下的爆裂或突然塌缩事件。据此可根据软流运动和岩石圈结构预测未来震中，建立中、长期预报甚至短临预报的监控系统     

Decomposition Analysis of Sectoral Energy Use in Beijing （1981-2005） Using the LMDI Method

This paper aims to identify the main driving force for changes of total primary energy consumption in Beijing during the period of 1981-2005. Sectoral energy use was investigated when regional economic structure changed significantly. The changes of total primary energy consumption in Beijing are decomposed into production effects, structural effects and intensity effects using the additive version of the logarithmic mean Divisia index （LMDI） method. Aggregate decomposition analysis showed that the major contributor of total effect was made by the production effect followed by the intensity effect, and the structural effect was relatively insignificant. The total and production effects were all positive. In contrast, the structural effect and intensity effect were all negative. Sectoral decomposition investigation indicated that the most effective way to slow down the growth rate of total primary energy consumption （TPEC） was to reduce the production of the energy-intensive industrial sectors and improving industrial energy intensity. The results show that in this period, Beijing＇s economy has undergone a transformation from an industrial to a service economy. However, the structures of sectoral energy use have not been changed yet, and energy demand should be increasing until the energy-intensive industrial production to be reduced and energy intensity of the region reaches a peak. As sequence energy consumption data of sub-sectors are not available, only the fundamental three sectors are considered： agriculture, industry and service. However, further decomposition into secondary and tertiary sectors is definitely needed for detailed investigations.