The impact of coal and non-coal consumption on China's energy performance improvement

China is the world's largest energy consumer, and coal accounts for a higher proportion of the country's total energy consumption, yet during its 12th five-year plan (2011–2015), the coal share among total energy consumption significantly decreased. Previous studies exploring energy performance typically used energy consumption as an input, but this lacks the analytical capacity for the structure of energy consumption. Thus, this study splits energy input into two different inputs, coal consumption and non-coal energy consumption, and based on their differences with other variables, uses the hybrid dynamic data envelopment analysis model to assess the energy performance of China's provincial industrial sector during the period 2011 to 2015. We then compare coal consumption's and non-coal consumption's rooms for improvement and conclude that provinces in eastern and central China should reduce the amount of coal consumption, thereby improving energy performance. Conversely, provinces in the western region should target a balance between energy utilization efficiency and coal consumption.     

Alternative method to prevent thermal runaway in case of error on operating conditions continuous reactor

Thermal runaway was studied in a continuous tubular pilot reactor under steady-state regime. Different accident scenarii were conducted by making some errors on reactant concentrations and/or temperature feed. To prevent thermal runaway, control by direct contact by solvent injection was used at different reactor locations. This injection allowed controlling the maximum reaction temperature. A simplified analytical method to estimate the maximum reaction temperature along the reactor was used.Benefit of this control method was the diminution of computational time. Furthermore, by injecting solvent to control maximum reaction temperature, there is no need to shut down the unit. The control method was validated experimentally.     

瓦斯压力对卸荷原煤力学特性及能量特征的影响

运用自主研制的含瓦斯煤热流固耦合三轴伺服渗流试验装置,以原煤煤样作为研究对象,进行了含瓦斯煤固定轴向压力、卸围压的渗流试验,研究了卸围压过程中瓦斯压力对煤样力学特性和能量特征的影响。结果表明:在轴压加载阶段,煤样的变形模量基本不变,泊松比逐渐减小;在定轴压卸围压阶段,煤样的变形模量先小幅度增加,然后逐渐减小,泊松比则逐渐增大。瓦斯压力越高,煤样的承载能力越低,煤样发生破坏时相应的轴向应变和围压卸荷量百分比越小,而煤样破坏时的径向变形和扩容量越大。各应变围压柔量Δεi与瓦斯压力呈线性关系且线性相关性良好。随瓦斯压力升高,轴向应变的围压敏感性降低,径向应变和体积应变的围压敏感性显著升高。随瓦斯压力升高,煤样发生破坏时存储的弹性应变能Ue减小,而总能量U、耗散能Ud和耗散能比例Ud/U都增大。     

基于层次分析法的热塑性聚氨酯及其纳米复合材料火灾危险性综合评价

聚合物的火灾危险性与热、烟、毒的释放密切相关,但采用不同指标对材料的评价结果不一致。以纳米级蒙脱土(MMT)、氢氧化铝(ATH)和聚磷酸铵(APP)为添加剂的热塑性聚氨酯(TPU)纳米复合材料为研究对象,选取其在静态管式炉、稳态管式炉和锥形量热仪中的相关实验数据,以HCN总浓度作为特殊毒性危害指标,CO和CO_2浓度为一般毒性危害指标,以热释放速率峰值、平均热释放速率、总热释放量为热危害指标,以产烟速率峰值、生烟总量为烟危害指标。进一步细分了火灾烟气中不同毒性气体对于火灾风险的影响,并运用层次分析法计算指标权重,综合评价了热塑性聚氨酯及其复合材料的火灾危险性。结果表明,当添加量为6 wt%聚磷酸铵、3 wt%氢氧化铝与3 wt%蒙脱土时,此时复合材料的火灾危险最低,证明了综合热、烟、毒三个层次来降低聚合物材料火灾危险性是可行的。     

惰性粉体对蔗糖粉尘最小点火能的影响研究

为了预防蔗糖粉尘爆炸,利用1.2 L哈特曼管研究了NH₄H₂PO₄与Al(OH₄对蔗糖粉尘爆炸的抑制作用。在蔗糖粉尘质量分数一定的条件下,通过改变 NH₄H₂PO₄与Al(OH)₄的粒径和质量分数,测定其对蔗糖粉尘爆炸的抑制效果。结果表明:随着NH₄H₂PO₄和Al(OH)₄质量分数的增加,粒径的减小,蔗糖粉尘的最小点火能均逐渐增大,当惰性粉体增加到一定质量时,蔗糖粉尘被完全惰化,在蔗糖粉尘中分别加入粒径为48~74,38~47,25~37 μm的NH₄H₂PO₄和Al(OH)₄,3种粒径的NH₄H₂PO₄使蔗糖粉尘完全惰化的质量分数分别为40%,35%,30%,3种粒径的Al(OH)₃使蔗糖粉尘惰化的质量分数均为60%。因此(NH₄)H₂PO₄抑制蔗糖粉尘爆炸的效果比Al(OH)₃更显著。     

Ignition temperatures of dust layers and bulk storages in hot environments

In many industrial installations, particulate solids (cereals, agri-food products, coal, plants, etc.) are stored or processed. Self-heating of these products, which can lead to fires and explosions, can occur in a variety of situations. Examples include large storage at room temperature, formation of a layer on a hot surface, layer deposited on a surface – insulating or conductive – in a hot environment or even storage of product exposed to heating on one side.The main parameters that determine the occurrence of self-heating are the size of the container, the temperature, the residence time and the characteristics of the product. Depending on the type of situation encountered and these implementation conditions, the analysis of self-heating risks must be based on specific models and/or parameters.This paper presents the different variants and combinations of the theoretical model from the theory of thermal runaway to represent self-heating, taking into account in particular the symmetry or asymmetry of heating, reagent consumption and boundary conditions. It also discusses their adaptation to the previous identified industrial situations.Nine products were chosen to be representative of those used in the different considered industrial situations. They were subjected to self-heating basket tests in isothermal ovens in order to determine the parameters for applying the described theoretical models. These results were compared with the results of self-heating tests in layers of different thicknesses in a hot environment, on an insulating or conductive plate, using a specially developed test protocol, as well as with the results of standardized tests of minimum ignition temperature in 5 mm layers.This led to the proposal of the most appropriate theoretical model to represent the self-heating phenomenon for each of the four identified industrial situations.This analysis can promote better design of industrial equipment and production conditions (temperatures, volumes or product flows …) in order to prevent fires and explosions.     

草莓有机与无机种植系统能流和经济流的比较研究

通过３年田间试验，比较分析了草莓有机与无机种植系统的能流、经济流及对土壤环境的影响。结果表明，有机系统草莓产量、经济效益均高于无机系统；有机系统能量产投比仅为无机系统的２５％，但投入的绝大部分为可再生能源；有机系统土壤有机质、微生物量高于无机系统，具有更好的土壤条件     

草莓在有机与无机种植系统中的能流和经济效益的比较

本文运用了生态经济学的原理，对草莓在有机和无机种植系统内能量流动、物质转化以及经济效益进行了比较研究。结果表明：两处理区施用几乎相同氮量的有机肥（１７５ｋｇ／ｈｍ￣２）和无机肥（１６４ｋｇ／ｈｍ￣２），其有机区草莓的生长发育、产量均明显好于无机处理区；有机草莓的光能利用率和氮素产出／投入分别比无机草莓提高了６４．２４％和５７．７２％；同时证明，优质有机肥可改善草莓的良用品质，并提高经济效益。     

黄土区陡坡侵蚀过程试验研究

通过室内放水冲刷试验,结果表明,陡坡单宽径流能耗与单宽径流产沙率之间存在以下线性关系:Dr=18.672(ΔE - 0.751),说明土壤的可蚀性参数为18.672 g/J,发生坡面细沟侵蚀的临界径流能耗为0.751 J/(ms)。坡面单宽径流能耗随流量增大而增加,随坡度变化呈抛物线趋势,临界坡度出现在21和24之间。坡面上各段面单宽径流能耗均随流量的增大而增加,随着坡度逐渐增加,坡面上部段面能耗渐增,中部段面渐减,下部较稳定。坡面各段面侵蚀产沙也有类似特征。此研究对于深入了解黄土高原陡坡土壤侵蚀过程和机理具有重要意义。     

粉煤灰资源的农业利用

本文根据粉煤灰农业利用的基础及国内外研究现状，阐述了粉煤灰农业利用现状，包括直接施用于农田、利用粉煤灰生产化肥、贮灰场覆土或不覆土造田和填坑造地等。并对粉煤灰农业利用的前景提出了一些看法。