Minimum ignition energy of medicinal powder – Florfenicol and Tilmicosin

This work aims to help improve the electrostatic safety design and explosion prevention of medical facilities. In this study, the minimum ignition energies (MIEs) of Florfenicol, Tilmicosin and mixtures of Florfenicol and Tilmicosin at ratios of 1:1, 1:2, 2:1 and 1:4 were measured in a Hartmann apparatus. The results demonstrated that the MIEs for Florfenicol, Tilmicosin and mixtures of Florfenicol and Tilmicosin at ratios of 1:1, 1:2, 2:1 and 1:4 are 200, 70, 180, 150, 200 and 110 mJ, respectively. Tilmicosin is more sensitive to static electricity, which is more dangerous than the other two powders examined in this paper. Furthermore, the MIEs of the mixtures are proportional to the Florfenicol content. For all powders, the MIE first decreased with the powder mass and later reached its minimum value. In addition, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) were used to investigate the morphological specificity and thermal decomposition of the powders to elucidate the parameters governing the powder explosions further.     

Minimum ignition energies of pure magnesium powders due to electrostatic discharges and nitrogen's effect

This paper experimentally investigated the relation between the minimum ignition energy (MIE) of magnesium powders as well as the effect of inert nitrogen (N₂) on the MIE. The modified Hartmann vertical-tube apparatus and four kinds of different-sized pure magnesium powders (median particle size, D50; 28.1 μm–89.8 μm) were used in this study. The MIE of the most sensitive magnesium powder was 4 mJ, which was affected by the powder particle size (D50; 28.1 μm). The MIE of magnesium powder increased with an increase in the N₂ concentration for the inerting technique. The magnesium dust explosion with an electrostatic discharge of 1000 mJ was suppressed completely at an N₂ concentration range of more than 98%. The experimental data presented in this paper will be useful for preventing magnesium dust explosions generated from electrostatic discharges.     

中国西南喀斯特森林土壤有机碳空间变化及影响因素

喀斯特地区土壤碳储量及其影响因素的认识是评估我国陆地土壤生态系统碳汇能力不可或缺的内容。本文通过对中国西南北起秦岭北坡南至中越边境一条剖面上土壤有机碳的分析,研究了喀斯特森林0~10cm土壤有机碳空间变化及其控制因素。研究发现西南地区土壤有机碳含量和碳密度平均为32.3 g/kg和33.1t/hm2。无论是在整个西南区还是其省市范围内,二者均低于非喀斯特森林土壤。通径分析表明,影响喀斯特表层土壤碳含量和密度的主要因素有土壤容重、地形海拔和有机质C/N;粘粒含量和年平均气温的影响很小,而降水量仅在地处最北部的陕西省构成了土壤碳密度的影响因素。此现象与世界许多地区特别是高纬度地区形成鲜明对比。本研究结果表明,不同区域/气候带土壤碳库的主要影响因素会存在很大差异,这对认识气候变化背景下土壤碳库的反馈作用具有重要意义。     

石英灯辐射式瞬态热环境试验关键技术分析

结合石英灯辐射式加热器的特性,从传感器弱信号传输、无功补偿、智能控制、仿形加热器、开环试验技术等角度出发,分析了对型号瞬态热试验性能的影响。结合瞬态热试验的实施,给出了上述几个角度制约热试验实施的改进措施,以期提高试验系统瞬态热试验的有效性。     

A new process to improve short-chain fatty acids and bio-methane generation from waste activated sludge

As an important intermediate product, short-chain fatty acids(SCFAs) can be generated after hydrolysis and acidification from waste activated sludge, and then can be transformed to methane during anaerobic digestion process. In order to obtain more SCFA and methane,most studies in literatures were centered on enhancing the hydrolysis of sludge anaerobic digestion which was proved as un-efficient. Though the alkaline pretreatment in our previous study increased both the hydrolysis and acidification processes, it had a vast chemical cost which was considered uneconomical. In this paper, a low energy consumption pretreatment method, i.e. enhanced the whole three stages of the anaerobic fermentation processes at the same time, was reported, by which hydrolysis and acidification were both enhanced, and the SCFA and methane generation can be significantly improved with a small quantity of chemical input. Firstly, the effect of different pretreated temperatures and pretreatment time on sludge hydrolyzation was compared. It was found that sludge pretreated at 100°C for 60 min can achieve the maximal hydrolyzation. Further, effects of different initial p Hs on acidification of the thermal pretreated sludge were investigated and the highest SCFA was observed at initial p H 9.0with fermentation time of 6 d, the production of which was 348.63 mg COD/g VSS(6.8 times higher than the blank test) and the acetic acid was dominant acid. Then, the mechanisms for this new pretreatment significantly improving SCFA production were discussed. Finally,the effect of this low energy consumption pretreatment on methane generation was investigated.     

Waste‐to‐energy recovery potential: A case study at Jaipur railway station

A study was conducted at the Jaipur railway station in Jaipur, India, to give the perspectives of the actual waste management practices there. Required information was collected from the stakeholders by means of semi‐structured questionnaires, individual and group interviews, and recorded, official data regarding waste generation, collection, transportation, and disposal. Further quantitative and compositional analyses were performed by means of surveys and measurements. Field visits were made for collection of waste samples for quantification and for the study of its management. The field data were compiled and analyzed by sorting the waste into different components. It was found that 1.8 tons of solid waste is collected per day, and a considerable percentage of it comprises paper, plastic, and glass. Excluding the inerts, which are irrelevant from the point of view of energy saving and recovery potential, the average moisture content was found to be 3.38%. From the perspective of life cycle analysis, the option of composting or recycling would give savings of 28.33 gigajoules (GJ) per day over landfilling, while combustion would give savings of 2.97 GJ per day in comparison to landfilling. Analysis based on a compositional model gives a heat value of 8,157.87 kilojoules per kilogram, which amounts to 14.68 GJ of energy per day.     

Comparisons and critical assessment of global and diffuse solar irradiation estimation methodologies

Defining better methodologies of accurate predictions of the amount of monthly mean daily global and diffuse solar irradiation exposed is of utmost importance in order to determine the potential for utilizing the solar energy. This study compares and discusses the main methodologies, databases, and software that are used in estimating the solar irradiation to be used for the short- and long-term performances and feasibilities of solar energy systems, especially photovoltaic power plants in Turkey, and addresses the best one to be used to make the most accurate estimations. The comparisons are carried out between the recent methodologies developed by the authors, some models taken from the related literature that are concluded to be better, a widely used database, namely Meteonorm, and a widely used software, namely EU PVGIS. The reference data to develop the methodologies and to make comparison are provided from the State Meteorological Service of Turkey, which is the responsible body in Turkey to make measurements of solar irradiation. The comparisons are based on monthly mean daily values of global and diffuse solar irradiation and are carried out by statistical errors: mean bias error and root mean square error. The results showed that the methodology developed by the authors has shown better performances in estimating the monthly mean daily global and diffuse solar irradiation amount for Turkey.     

基于能源利用的市政污泥处置技术的发展研究

市政污泥是污水生物处理过程中产生的城市固废,产量巨大、污染严重."十三五"期间中国污泥无害化处理任务艰巨,常规的污泥处理处置在二次污染、占地、能耗等方面具有局限,影响了在中国的广泛应用.污泥的能源化利用是兼具污泥量削减和新附加值产生的发展方向,本文围绕当前市政污泥能源化的研究、应用领域的发展加以讨论,探讨了污泥能源利用的潜能和存在的主要问题.     

中国的低碳住宅建设与评估

中国目前面临着严峻的节能减碳目标,在中国的总能耗中建筑能耗占了三分之一以上。然而低碳住宅在中国刚刚起步,评估体系尚不完善,建设技术方法也未成熟,低碳住宅的普及率很低。本文通过对国内现有的绿色住宅评价体系的分析,结合中国自身的国情,初步提出一套大众能够接受的低碳住宅的建设方案,为今后低碳住宅的建设评估和推广提供参考。     

清洁生产审核在氮肥企业的应用

某氮肥企业通过开展清洁生产审核,确定以节水、减少废水及水污染物排放量为目标,将企业供排水系统作为本轮清洁生产审核的重点,针对审核重点制定了定量的清洁生产审核目标,通过清洁生产方案的实施实现了环境效益、社会效益与经济效益的统一,为氮肥企业实施清洁生产提供了良好的借鉴。