太阳能作污泥厌氧消化加热热源试验研究

太阳能用作污泥厌氧消化加热的可靠性进行了小试和中试研究.小试结果表明污泥吸热效率高.是一种较好的吸热体.浅槽式集热器水温随太阳辐射强度增高而升高,随水深增加而降低,小试采用单(双)层玻璃浅槽式集热器.中型试验太阳能水箱水温温升,在气温低时12.4℃～20.5℃,气温高时16℃～24.8℃,太阳能集热器可作为污泥厌氧消化加热补充热源.     

An improved user-based beach climate index

In many coastal resort areas of the world, it is likely that optimal climatic conditions for beach use might occur outside the peak of the tourist season. Investigation of this issue together with associated publicity might help to spread the tourism load and hence reduce undesirable social and environmental effects of extreme seasonality in tourist demand. For this to take place, better knowledge of beach user preferences in terms of climate and bathing water temperature is required. Questionnaire surveys were carried out in Wales, Malta and Turkey to establish the preferences of north European beach users for thermal sensation and bathing water temperature, plus priority levels for other climatic attributes. A user-based beach climate index based on these preferences and priorities was formulated. Linkage was made between the user-generated ratings for various climatic conditions and published climate data to evaluate most major Euro-Mediterranean/Black Sea and a range of other beach tourism areas on a month-by-month basis. Results showed excessively hot thermal sensation in many southern and eastern Mediterranean coastal destinations during July and August, the present peak of the beach tourism season. Highest preference was given to water temperatures rather lower than those found in these areas during late summer. Many long haul coastal destinations popular with north European visitors had similar unpleasant thermal sensations over several months. Uncertainties and deficiencies still exist with the system, but from the point of view of north European beach users the final scores generated in this study may be regarded as good approximations of the quality of resort area climates for sedentary beach use.     

天津市农村能源建设与可持续发展战略探讨

本文针对天津市农村能源建设与可持续发展的关系及能源建设方向等问题,分析了天津市农村能源的现状与特征,从而提出能源与经济,环境协调发展,调整能源结构提高农村能源利用的新举措。     

膜生物反应器无剩余污泥排放的研究

本文介绍了以膜生物反应器为基础的剩余污泥产量最少或无剩余污泥产生的最新的污水处理理论和技术。从技术微生物基本生命活动的物质转化概念和细胞产生和平衡的理论,提出了确定维持微生物基本生命活动的物质转化系数的方法,从理论与实验上计实了膜生物反应器无剩余污泥排放的可能性。     

Differential use of stored sperm during oviposition in the damselfly Calopteryx splendens xanthostoma (Charpentier)

Female Calopteryx splendens xanthostoma (Charpentier) (Odonata), have two discrete sperm storage organs, the bursa copulatrix and the paired spermathecae. We used the Random Amplified Polymorphic DNA(RAPD) profiling technique to determine from which sperm storage organ spermatozoa were used to fertilise eggs during behaviourally distinct oviposition bouts. During oviposition bouts following remating sperm from the bursa copulatrix are largely used to fertilise eggs, but when females avoid remating before an oviposition bout the sperm used to fertilise eggs are derived mainly from the paired spermathecae. Our observations suggest that female C. s. xanthostoma can avoid male paternity assurance mechanisms by a combination of behavioural and anatomical adaptation: the reason(s) they do so is unclear. Received: 28 November 1995/Accepted after revision: 5 August 1996     

Salinity exchange between seawater/brackish water and domestic wastewater through electrodialysis for potable water

● Present a general concept called “salinity exchange”. ● Salts transferred from seawater to treated wastewater until completely switch. ● Process demonstrated using a laboratory-scale electrodialysis system. ● High-quality desalinated water obtained at ~1 mL/min consuming < 1 kWh/m ³ energy. Two-thirds of the world’s population has limited access to potable water. As we continue to use up our freshwater resources, new and improved techniques for potable water production are warranted. Here, we present a general concept called “salinity exchange” that transfers salts from seawater or brackish water to treated wastewater until their salinity values approximately switch, thus producing wastewater with an increased salinity for discharge and desalinated seawater as the potable water source. We have demonstrated this process using electrodialysis. Salinity exchange has been successfully achieved between influents of different salinities under various operating conditions. Laboratory-scale salinity exchange electrodialysis (SEE) systems can produce high-quality desalinated water at ~1 mL/min with an energy consumption less than 1 kWh/m³. SEE has also been operated using real water, and the challenges of its implementation at a larger scale are evaluated.     

Analysis of the relation between the cellulose,hemicellulose and lignin content and the thermal behavior of residual biomass from olive trees

The heterogeneity of biomass makes it difficult if not impossible to make sweeping generalizations concerning thermochemical treatment systems and the optimal equipment to be used in them. Chemical differences in the structural components of the biomass (cellulose, hemicellulose, and lignin) have a direct impact on its chemical reactivity. The aim of this research was to study the influence of the organic components of the raw material from olive trees (leaves, pruning residues, and wood) in the combustion behavior of this biomass, as well as to find the component responsible for the higher ash content of olive leaves. Accordingly, the study used a thermogravimetric analyzer to monitor the different states and complex transitions that occurred in the biomass as the temperature varied. The decomposition rates of the different samples were analyzed in order to establish a link between each combustion phase and the composition of the raw materials. Two methods were used to determine the hemicellulose and cellulose contents of biomass from olive trees. Significant differences among the results obtained by the different methods were observed, as well as important variations regarding the chemical composition and consequently the thermal behavior of the raw materials tested.     

Effect of thermal pretreatment on the physical and chemical properties of municipal biomass waste

The effects of thermal pretreatment on the physical and chemical properties of three typical municipal biomass wastes (MBWs), kitchen waste (KW), vegetable/fruit residue (VFR), and waste activated sludge (WAS) were investigated. The results show that thermal pretreatment at 175 °C/60 min significantly decreases viscosity, improves the MBW dewatering performance, as well as increases soluble chemical oxygen demand, soluble sugar, soluble protein, and especially organic compounds with molecular weights >10 kDa. For KW, VFR and WAS, 59.7%, 58.5% and 25.2% of the organic compounds can be separated in the liquid phase after thermal treatment. WAS achieves a 34.8% methane potential increase and a doubled methane production rate after thermal pretreatment. In contrast, KW and VFR show 7.9% and 11.7% methane decrease because of melanoidin production.     

中国可再生能源政策演化、效果评估与未来展望

发展可再生能源已成为中国能源转型及减缓气候变化的关键途径。2006年《可再生能源法》实施至今,中国可再生发展取得举世瞩目成绩。然而可再生能源在中国整个能源结构中的占比仍然偏低,其未来可持续发展仍面临挑战,如可再生能源发展资金缺口持续扩大,可再生能源电力消纳仍然面临一定障碍。在未来新的发展背景下,有必要对中国可再生能源政策进行系统的评估和总结,进一步探讨未来可再生能源政策的优化方案。本文首先对中国2005—2019年可再生能源政策的发展历程及演化路径进行总结梳理,基于不同时期的发展特点及面临的主要矛盾将中国可再生能源政策历程划分为四个阶段;然后在综述相关研究基础上,对中国可再生能源政策的实施效果进行评估,包括政策有效性、政策成本、技术进步等。结果表明,中国过去十年的可再生能源政策对促进可再生能源快速发展是积极有效的,而促进可再生能源发展的政策成本仍然有进一步下降的空间;另外,虽然中国可再生能源发电成本下降显著,然而基于历史经验的技术进步率仍然不足以支撑实现中国2020年平价上网的目标,未来需要进一步推动可再生能源技术的进步和发电成本的下降。结合当前及未来中国可再生能源发展所处阶段的特点及面临挑战,我们提出进一步完善中国可再生能源政策以促进可再生能源持续稳定发展的政策建议,一是完善可再生能源绿色电力证书交易制度,增强可再生能源发展的内生激励并降低政策实施成本;二是建立储能技术市场机制,为减少弃电以及推动可再生能源消纳提供政策支持;三是推进碳金融体系建设,为可再生能源发展提供新的融资来源并降低发电成本。     

A methodology for electricity monitoring and targeting (M&T) in an Irish precision engineering SME

Abstract

Energy management in small to medium enterprises (SMEs) remains undeveloped due to competing priorities and a lack of specialist knowledge. However considerable savings can be demonstrated where companies take the time to investigate their energy use. Savings of over 20% can be achieved through changes to operational and behavioural practice. Additional benefits, such as improved production tracking and improved maintenance, can been seen which add to the value in undertaking an energy monitoring and targeting (M&T) plan. The method described involves the application of a series of ‘virtuous’ cycles of engagement and energy savings that can be applied from the highest factory level right down to a specific machine. The analysis of overall energy use from utility bills and the visualisation of typical machine power profiles aid in understanding the drivers of energy consumption and in engaging management in energy efficiency. The monitoring of specific machines in production highlights the significant consumption of electricity during non-productive times. The development of energy performance indicators is described for product variations which can be useful in tendering for business and selecting optimum production pathways. The approach is illustrated with data from a case study of a precision engineering SME based in Limerick, Ireland.