Investigating the effect of geometric dimensions of median traffic barriers on crashes: Crash analysis of interstate roads in Wyoming using actual crash datasets

IntroductionDespite the numerous safety studies done on traffic barriers’ performance assessment, the effect of variables such as traffic barrier’s height has not been identified considering a comprehensive actual crash data analysis. This study seeks to identify the impact of geometric variables (i.e., height, post-spacing, sideslope ratio, and lateral offset) on median traffic barriers’ performance in crashes on interstate roads.MethodGeometric dimensions of over 110 miles median traffic barriers on interstate Wyoming roads were inventoried in a field survey between 2016 and 2018. Then, the traffic barrier data collected was combined with historical crash records, traffic volume data, road geometric characteristics, and weather condition data to provide a comprehensive dataset for the analysis. Finally, an ordered logit model with random-parameters was developed for the severity of traffic barrier crashes. Based on the results, traffic barrier’s height was found to impact crash severity.ResultsCrashes involving cable barriers with a height between 30″ and 42″ were less severe than other traffic barrier types, while concrete barriers with a height shorter than 32″ were more likely involved with severe injury crashes. As another important finding, the post-spacing of 6.1–6.3 ft. was identified as the least severe range in W-beam barriers.Practical applicationsThe results show that using flare barriers should reduce the number of crashes compared to parallel barriers.     

Carbon monoxide levels at a toll plaza near Durban, South Africa

Reliable measurements of pollutant levels in the vicinity of a toll plaza appear to be rare. In order to assess the exposure of toll booth operators to carbon monoxide, a continuous carbon monoxide monitor was installed at head height in the booth of a medium density traffic lane at the Mariannhill toll plaza, situated on a busy highway near Durban, South Africa. Measurements in excess of 500 ppmv were recorded and the high daily mean carbon monoxide concentrations may account for some of the symptoms such as headaches and general malaise that have been reported by workers in the booths. Generally, carbon monoxide levels recorded far exceed the recommended limit set by the South African authorities. These results have led to recommendations regarding the structure of new and existing toll booths to minimize the exposure of toll booth workers to adverse effects of vehicle-emitted pollutants.     

Traffic congestion and ozone precursor emissions in Bilbao (Spain)

GOAL. SCOPE. BACKGROUND: In urban environments, the measured levels of ozone are the result of the interaction between emissions of precursors (mainly VOCs and NOx) and meteorological effects. In this work, time series of daily values of ozone, measured at three locations in Bilbao (Spain), have been built. Then, after removing meteorological effects from them, ozone and traffic data have been analyzed jointly. The goal was to identify traffic situations and link them to ozone levels in the area of Bilbao. METHODS: To remove meteorological effects from the selected ozone time series, the technique developed by Rao and Zurbenko was used. This is a widely used technique and, after its application, the fraction obtained from a given ozone time series represents an ozone forming capability attributable to emissions of precursors. This fraction is devoid of any meteorological influence and includes only the apportion of periodicities above 1.7 years. In the case of Bilbao, the ozone fractions obtained at three locations have been compared on that time scale with traffic data from the area. RESULTS AND DISCUSSION: For the 1993-1996 period, a regression analysis of the ozone and traffic fractions due to periodicities above 1.7 years (long-term fractions), shows that traffic is the main explanatory factor for ozone with R2 ranging from 0.916 to 0.996 at the three locations studied. Analysis of these longterm fractions has made it possible to identify two traffic regimes for the whole area, associated to different profiles of ozone forming capability. The first one favors low ozone forming capability, and is associated with a situation of fluent traffic. The second one shows high ozone forming capability and represents congestion. Joint analysis of raw data of ozone and traffic do not show any clear pattern due to the strong masking effects that seasonal-meteorological effects (mainly radiation) have on the measured ozone signal. If only immission data of ozone are available, as in this case, a comparison between ozone and traffic can only be made on the long-term time scale, since that is the only fraction embedded in the ozone time series that can exclusively be attributed to emissions of precursors. This fact stresses the need to study the different fractions embedded in the time series of ozone measured levels separately. CONCLUSION: Though the coefficients obtained in the regression are only valid for the 1993-1996 period, these traffic regimes represent long-term targets (congestion or fluent traffic) that can inspire policies for a joint management of the traffic and pollution by ozone in the area of Bilbao beyond that period. RECOMMENDATIONS AND OUTLOOK: The results of this work show the need of a joint management of ozone and traffic in Bilbao. Since an accurate knowledge of traffic was not available, the use of emission factors to relate traffic and actual ozone levels has not been possible. For this reason, this study has focused on the long-term fractions of traffic and ozone. In the future, if a more accurate knowledge of traffic is available, it will be possible to find relationships between traffic and ozone on all time scales.     

道路交通中苯并(a)芘的高效液相色谱快速测定

用超细玻璃纤维滤膜采集杭州市某道路上机动车排放的苯并（ａ）芘,经超声萃取,高速离心后直接进ＨＰＬＣ分析。在选定的色谱条件下,苯并（ａ）芘与其他多环芳烃完全分离,绝对进样量在０．８～０．０２ ｎｇ时线性良好,相关系数为０．９９９７９,最小检出量０．８ ｐｇ,加标回收率８７．５％～９３．８％。     

Effect of enhanced seat belt reminders on driver fatality risk

Objective

Enhanced seat belt reminders in automobiles have been shown to increase belt use rates by approximately 3 percentage points. The objective of this study was to estimate the effect of enhanced seat belt reminders on driver fatality risk.

Method

Data included all passenger vehicle driver deaths and vehicle registration counts in the United States for calendar years 2000-2007. Driver fatality rates per vehicle registration per year were compared for otherwise identical vehicle models with and without enhanced seat belt reminders.

Results

Driver fatality rates were 6% lower for vehicles with enhanced seat belt reminders compared with vehicles without enhanced belt reminders. After adjusting for vehicle age differences, the estimated effect of enhanced belt reminders on driver fatality risk ranged from a 9% reduction for General Motors vehicles to a 2% increase for Honda vehicles. Combining all manufacturers, enhanced belt reminders reduced fatality risk by approximately 2%. Although not statistically significant, the 2% reduction in fatality risk agrees with what should be expected from a 3 percentage point increase in seat belt use rates.

Conclusions

Enhanced seat belt reminders have raised driver belt use rates and reduced fatality rates, but more aggressive systems may be needed for some drivers. It can be inferred that nonfatal injury rates also have been reduced.

Impact on Industry

Manufacturers should be encouraged to put enhanced seat belt reminders on all vehicles as soon as possible.     

Why Singapore's land transportation energy consumption is relatively low

Since the early 1970s, Singapore has enacted a number of measures to tackle traffic congestion, including measures to restrain vehicle ownership. Although Singapore's per capita GDP is comparable to that of OECD countries, the present car-ownership level in Singapore (10 cars per 100 people) is only a fraction of levels in the OECD countries. Traffic flow in this city-State is relatively smooth, even during peak hours. Although the measures taken were aimed primarily at tackling traffic congestion, they have had other positive impacts, such as reducing energy consumption, air pollution and CO₂ emissions. This article presents an overview of the transportation measures and initiatives in Singapore, and analyses two of the transport demand management measures in detail: the vehicle restraint measure, in particular the unique vehicle quota system introduced in 1990; and the two road pricing systems, i.e. the area licensing scheme (ALS) that operated from 1974 to 1998, and the electronic road pricing system (ERP) that went into operation in 1998. Energy and environmental impacts are then discussed, and finally factors contributing to the success of these schemes. Although certain conditions are unique to Singapore, the experience shows that substantial energy and environmental benefits can be achieved through managing urban transportation system in an integrated and innovative way.     

Spatial & temporal variations of PM10 and particle number concentrations in urban air

The size of particles in urban air varies over four orders of magnitude (from 0.001 μm to 10 μm in diameter). In many cities only particle mass concentrations (PM10, i.e. particles <10 μm diameter) is measured. In this paper we analyze how differences in emissions, background concentrations and meteorology affect the temporal and spatial distribution of PM10 and total particle number concentrations (PNC) based on measurements and dispersion modeling in Stockholm, Sweden. PNC at densely trafficked kerbside locations are dominated by ultrafine particles (<0.1 μm diameter) due to vehicle exhaust emissions as verified by high correlation with NOx. But PNC contribute only marginally to PM10, due to the small size of exhaust particles. Instead wear of the road surface is an important factor for the highest PM10 concentrations observed. In Stockholm, road wear increases drastically due to the use of studded tires and traction sand on streets during winter; up to 90% of the locally emitted PM10 may be due to road abrasion. PM10 emissions and concentrations, but not PNC, at kerbside are controlled by road moisture. Annual mean urban background PM10 levels are relatively uniformly distributed over the city, due to the importance of long range transport. For PNC local sources often dominate the concentrations resulting in large temporal and spatial gradients in the concentrations. Despite these differences in the origin of PM10 and PNC, the spatial gradients of annual mean concentrations due to local sources are of equal magnitude due to the common source, namely traffic. Thus, people in different areas experiencing a factor of 2 different annual PM10 exposure due to local sources will also experience a factor of 2 different exposure in terms of PNC. This implies that health impact studies based solely on spatial differences in annual exposure to PM10 may not separate differences in health effects due to ultrafine and coarse particles. On the other hand, health effect assessments based on time series exposure analysis of PM10 and PNC, should be able to observe differences in health effects of ultrafine particles versus coarse particles.     

Using a novel data linkage approach to investigate potential reductions in motor vehicle crash severity – An evaluation of strategic highway safety plan emphasis areas

Introduction: With the significant number of motor-vehicle fatalities occurring on the nation’s roadways in recent years, there exists a need to integrate a more complete range of data sources, available at a regional or statewide level, to effectively evaluate existing safety concerns and quantify their impacts. Crash data alone does not provide ample crash-associated citation, injury, and roadway characteristics; therefore, a more cohesive dataset is required to accurately and completely analyze the true impacts of motor-vehicle crashes. Previously developed strategies linked crash data with citation and roadway inventory data to enhance the identification and optimization of highway safety strategies. Method: The main objective of this research focused on developing a new deterministic linkage between crash and Emergency Medical Services (EMS) data, by utilizing the Massachusetts Crash Data System (CDS) and the Massachusetts Ambulance Trip Record Information System (MATRIS). Results: After several iterations of match criterion, the validated linkage successfully matched 58.3% of MATRIS records (containing an Injury Cause of Motor Vehicle Crash) to a CDS person record (55011 linked pairs, between 2014 and 2016). The data linkage provided significant insight into injury trends in several highway safety emphasis areas such as roadway departure, speeding-related, and distraction-affected crashes. The findings from this research are twofold: (1) an established process for linking previously separate data sets, and (2) a mechanism for analysis that provides decision-makers and safety professionals with a better measure of crash outcomes.     

On designing streets: an interactive perspective

The following is a summary of work carried out in urban planning design at the University of Newcastle upon Tyne. The main objectives of the study were to identify those factors which condition the use of a street and to understand the physical and emotional impacts of the street and its different characteristics upon its users; eventually this led to establishing facts involving the criteria which contribute to making streets which would enrich peoples’ experience and would contribute to the urban life and excitement of all.     

Roadside dusts and soils contamination in Cincinnati,Ohio, USA

Roadside dusts and soils were collected from various nonindustrial districts in Cincinnati, Ohio, USA, and analyzed for lead and copper contents. Results showed that the recent lead phase-down action has reduced the level of lead, but the concentrations of both metals are still higher than the background levels for normal soil. Elevated concentrations of copper in heavily traveled highways were noted, suggesting that much of the copper pollutants is probably of automotive origin. The concentration of lead was found to vary with housing age, and higher levels of contamination in the older neighborhoods were observed. This result is probably ascribable to the accumulation of residues from leaded gasoline and lead-based paint in the past and the use of coal fire for space heating in older houses.