高温下钢及组合钢节点有限元建模及基于构件的分析方法(英文)

欧洲规范EC3 Part 1-1第5章[1]允许工程师使用一些先进的有限元分析软件来分析和设计钢结构,如线弹性、刚塑性以及二阶弹塑性整体分析。这3种极不相同的分析方法,能够用于简支、半连续以及连续节点模型中[2]。节点模型根据刚度的不同,可分为铰接、半刚性和刚性模型;按照强度的不同,可分为铰接、部分强度和全强度模型。尽管大多数的工程问题仅仅要求进行线弹性分析,但仍有一些特殊结构可能要求采用高级分析以降低施工成本,例如底层无支撑钢框架结构。在这种结构中,采用半连续节点(具有半刚度和部分强度特性)进行框架分析,会显著增强结构抵抗名义水平荷载、风荷载、整体缺陷、地震作用时的抗侧刚度和强度,因此在控制的水平荷载下计算的横向侧移可能在EC3允许的范围内。在基于性能的抗火设计中,结构抗火工程师可能想利用钢节点潜在的刚度和强度,尤其是有端板节点的钢结构,这是一种最常见的钢结构施工形式。端板可以是部分深度的,或者是延伸端板,涵盖了名义铰接、半刚性和完全刚性节点模型。本文给出了端板节点高温性能研究的一系列数值分析结果;应用基于构件的方法,建立了这些节点在高温下的力学反应计算公式,以及梁腹板剪应力分量、连接处的拉应力和压应力区域的力学模型。基于构件的方法能够考虑钢节点的热约束效应。对已有钢端板节点试验进行了有限元模拟和基于构件的分析表明,2种方法的分析结果与试验结果的偏差都是可接受的,包括热约束效应。     

Comparing results of cultured and uncultured biological methods used in biological phosphorus removal

Increasing attention has been paid to phosphate-accumulating organisms(PAOs)for their important role in biological phosphorus removal.In this study,microbial communities of PAOs cultivated under different carbon sources(sewage,glucose,and sodium acetate) were investigated and compared through culture-dependent and culture-independent methods,respectively.The results obtained using denaturing gradient gel electrophoresis(DGGE)of polymerase chain reaction-amplified 16S rDNA fragments revealed that the diversity of bacteria in a sewage-fed reactor(1#)was much higher than in a glucose-fed one(2#)and a sodium acetate-fed one(3#);there were common PAOs in three reactors fed by different carbon sources.Five strains were separated from three systems by using a phosphate- rich medium;they were from common bacteria isolated and three isolates could not be found in DGGE profile at all.Two isolates had good phosphorus removal ability.When the microbial diversity was studied,the molecular biological method was better than the culture-dependent one.When phosphorus removal characteristics were investigated,culture-dependent approach was more effective. Thus a combination of two methods is necessary to have a comprehensive view of PAOs.     

板料成形数值模拟的逆算法研究

依据理想形变理论 ,研究开发了冲压成形过程模拟的有限元逆算法 ,并考虑了成形中的压边力 ,拉延筋等工艺条件 ,实现了计算机程序。通过实例的计算表明此方法能够快速分析成形工件中的变形情况 ,可用于设计前期阶段评价零件的成形性能     

Redesigning harvest strategies for sustainable fishery management in the face of extreme environmental variability

Short-lived, fast-growing species that contribute greatly to global capture fisheries are sensitive to fluctuations in the environment. Uncertainties in exact stock–environment relationships have meant that environmental variability and extremes have been difficult to integrate directly into fisheries management. We applied a management strategy evaluation approach for one of Australia's large prawn stocks to test the robustness of harvest control rules to environmental variability. The model ensemble included coupled environmental-population models and an alternative catchability scenario fitted to historical catch per unit effort data. We compared the efficacy of alternative management actions to conserve marine resources under a variable environment while accounting for fisher livelihoods. Model fits to catch per unit effort were reasonably good and similar across operating models (OMs). For models that were coupled to the environment, environmental parameters for El Niño years were estimated with good associated precision, and OM3 had a lower AIC score (77.61)  than the base model (OM1, 80.39), whereas OM2 (AIC 82.41) had a similar AIC score, suggesting the OMs were all plausible model alternatives. Our model testing resulted in a plausible subset of management options, and stakeholders selected a permanent closure of the first fishing season based on overall performance of this option; ability to reduce the risk of fishery closure and stock collapse; robustness to uncertainties; and ease of implementation. Our simulation approach enabled the selection of an optimal yet pragmatic solution for addressing economic and conservation objectives under a variable environment with extreme events.