Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing on global warming potentials. The consequence of choosing a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate was studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved biomass, in order to study the importance of the system boundary choices. For recycling, the choice of virgin paper manufacturing data is most important, but the results show that also the impacts from the reprocessing technologies fluctuate greatly. For the overall results the choice of the technology data is of importance when comparing recycling including virgin paper substitution with incineration including energy substitution. Combining an environmentally high or low performing recycling technology with an environmentally high or low performing incineration technology can give quite different results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system to include substitution of fossil fuel energy by production of energy from the saved biomass associated with recycling will give a completely different result. In this case recycling is always more beneficial than incineration, thus increased recycling is desirable. Expanding the system to include forestry was shown to have a minor effect on the results. As assessments are often performed with a set choice of data and a set recycling rate, it is questionable how useful the results from this kind of LCA are for a policy maker. The high significance of the system boundary choices stresses the importance of scientific discussion on how to best address system analysis of recycling, for paper and other recyclable materials.     

Wastewater management in small- and medium-size enterprises: case studies

Wastewater management in small and medium-sized enterprises representing the chemical and food industries was investigated. The results showed that wastewater discharged from an ink-production factory was highly contaminated with organic pollutants. Anaerobic biological treatment followed by chemical coagulation using ferric chloride aided with lime proved to be very effective and produced an effluent that complied with national regulatory standard for wastewater discharge into public sewage network. Also, management of wastewater from a confectionery factory representing the food sector was carried out. Aerobic biological treatment using plastic-packed trickling filter proved to be an effective treatment method. However, application of in-plant control measures alleviated the requirement for the construction of a wastewater treatment plant. The applied pollution prevention and cleaner production measures involved good housekeeping, recovery of spent chocolate, modification of floor cleaning and installation of suction devices for the removal of sugar and starch powders. All improvement measures were documented by cost/benefit analysis.     

Using LCA to evaluate impacts and resources conservation potential of composting: A case study of the Asti District in Italy

Separate collection of municipal solid waste has overcome the 50% threshold in the Asti District in northern Italy, nearly one-third being composed of household and green organic waste. In order to address present and future solutions, it becomes therefore fundamental to assess the environmental performances of the current management of organic waste from separate collection. A from-gate-to-cradle life cycle assessment (LCA) model has been developed by expanding system boundaries, in order to carry out the assessment in the context of the whole waste management streamline. The environmental performances of an existing aerobic plant were made available, based on field measured data, by paying attention to the role and contribution of waste management subsystems. The need for actual and reliable data on materials and energy input, as well as gross and net gains from materials recovery, including benefits arising from use of compost in farming activities, was probably the major drawback that had to be faced. The study integrated the findings of different investigations from the literature with field measured data in order to obtain a more comprehensive framework representative of the area under study. The results may help public administrators to better understand the suitability of using LCA tools when dealing with solid waste management strategies.     

Multi-criteria evaluation technique for SFI site identification of NORMS and oil industry waste disposal – Possibilities in Kuwait

Waste generation and accumulating quantities of oil field waste are a matter of environmental concern. This study proposes the Slurry Fracture Injection (SFI) technique as an alternative waste disposal method. The slurried solids injection waste disposal method is environmentally secure and permanent, leaving no future liabilities that must be risk-evaluated or priced. An entire waste stream comprising ground solids and waste water can be injected into deep and hydraulically secure target strata with no contamination of potable water-bearing formations or formations outside the target zone that may contain resources (gas and oil). The slurry injection method can be used to clean and reclaim landfills, oil pits and granular waste dumps. This article proposes a two-tier screening method for evaluating the feasibility of this technique and the identification of suitable target zones. A stringent environmental and process control monitoring program should complement the planning and operational period to ensure environmental protection, waste containment, and regulatory HSE compliance.     

Two decades,three WEEE systems: How far did EPR evolve in Korea's resource circulation policy?

Extended producer responsibility (EPR) has become a dominant policy paradigm for the management of waste electrical and electronic equipment (WEEE) in the last two decades. In South Korea the principle has guided the evolution of the resource circulation policy even before its official introduction through a revision of the recycling law in 2002. Elements of producer responsibilities could be found in the producer-based deposit refund system (DRS) a decade earlier and they were strengthened through the enactment of a new resource circulation law in 2008. This article reviews the policy changes in South Korea for the management of WEEE during the past 20 years. The focus of the analysis is on the impacts of EPR and the producers’ responses that were expressed through the quantity and the quality of material flows in the society. The findings are discussed in light of international experiences in order to outline measures to improve the effectiveness of the EPR-based resource circulation policy that could have broader implications beyond the case study.     

The long and winding road to resource efficiency – An interdisciplinary perspective on extended producer responsibility

Extended producer responsibility is advocated for its capacity to spur resource efficiency through green innovation and closing loops downstream of consumption. Its rationale is the extension of the polluter-pays principle to the post-consumption phase. This paper analyze the underlying mechanisms that are supposed to work under the EPR approach, and proposes an alternative view. The main purpose of EPR is seen as the creation of the bases for legitimizing the involvement if industry taking over the task of diverting waste from landfill. Its success rests on the superior managerial capacity of industry and the need to organize post-consumption markets that transcend the local scale and have access to the economies of scale and scope. The emphasis on producers does not add anything special, but may reinforce the bases for legitimizing the implicit delegation of power to industry. Primary and above all, we have witnessed in the last 20 years a gigantic effort of market design, and this is the main demonstration of EPR's success.     

System dynamics model for analyzing effects of eco-design policy on packaging waste management system

EU's long-term objective is to become a recycling and resource effective society, where waste is utilized as a resource and waste generation is prevented. A system dynamics model was developed to analyze the policy mechanisms that promote packaging material efficiency in products through increased recycling rates. The model includes economic incentives such as packaging and landfill taxes combined with market mechanisms, behavioral aspects and ecological considerations in terms of material efficiency (the packaging material per product unit, recycled fraction in products). The paper presents the results of application of various policy instruments for increasing packaging material efficiency and recovery rate and reducing landfilled fraction. The results show that a packaging tax is an effective policy instrument for increasing the material efficiency. It ensures the decrease of the total consumption of materials and subsequent waste generation. The tax helps to counteract a rebound effect, which, as identified by the analysis, can be caused by reduced material costs due to eco-design. The model is applied to the case of Latvia. Yet, the elements and structure of the model developed are similar to waste management systems in many countries. By changing numeric values of certain parameters, the model can be applied to analyze policy mechanisms in other countries.     

Analysis of the implementation of effective waste management practices in construction projects and sites

In this paper, the implementation of effective waste management practices in construction projects and sites is analyzed, using data from a survey answered by 74 Spanish construction companies based in Catalonia. Most commonly implemented practices were found to be on-site cleanliness and order, correct storage of raw materials, and prioritization of the nearest authorized waste managers. The least widespread practices were the use of a mobile crusher on site, the creation of individualized drawings for each construction site, and the dissemination of the contents of the waste management plan to all workers, to help them to meet its requirements. Waste regulations for construction and demolition, and the corresponding construction waste management facilities, were designed before the recession in the Spanish construction sector. Current waste generation rates are still below predicted levels, and the infrastructure was designed for five times more waste generation. Even so, the percentage of reused and recycled waste currently amounts to 43%. Survey respondents highlighted various instruments and measures that would make the management of construction and demolition waste more sustainable. Most of the opportunities identified by construction firms are within the scope of government and related to a combined system of bonus and penalties and the establishment of environmental awareness and training programmes for all the stakeholders. Within the scope of authorized waste managers, firms suggested improvements such as the standardization of fees, a reduction of the time until the issue of waste management certificates, a higher number of inspections, and a change in the current model of a few large construction waste management facilities. This research is useful to better understand the current status of construction and demolition waste management in construction projects and sites. Thus, the results of this research will guide policy makers and relevant stakeholders such as contractors, clients, architects and engineers to achieve the EU target of recovering 70% of construction and demolition waste in 2020. In this sense, reliable information can help governments and professional associations to set future C&D waste management regulations, training programmes and dissemination tools, inspections, etc.     

废物库周围地下水中的放射性核素铀和锶-90分布研究

中国工程物理研究院核　物理与化学研究所原工作地点（老点）存在两个放射性废物库５３７－１和５３７－２。年内分别在库周围取地下水（或土）６次，对５３７－１得到地下水和泥土中的铀含量大约为１．２７μｇ／Ｌ和３．０μｇ／Ｌ，对５３７－２得到的地下水中的９０Ｓｒ含量约为５．３５×１０－３Ｂｑ／Ｌ。上列数据与本底无明显差异。可见，５３７－１废物库周围地下水中铀含量与生活区河水中含量无明显差异，５３７－２废物库周围地下水中锶含量与生活区河水中含量也无明显差异。至今未监测到两个废物库中的放射性核素对周围地下水中的明显　影响。     

Managing disposal of water produced with petroleum in Kuwait

Disposal of water produced with petroleum has been of great interest in Kuwait for the last 20 years. The current problem arose when the Burgan oil field, which is the second largest field in the world, experienced successive increases in the water content of the produced oil. This study introduces a decision-making analysis of the considered alternatives for the disposal of the produced water. Four alternative solutions exist for the industry as practical solutions for the disposal of water produced in Kuwait. The first method utilizes a large number of pits to discharge water. The second alternative depends on discharging water into sealed pits. The third approach to dispose water is by injecting the water underground. The last method is similar to the previous one, but takes into consideration the recovery of reservoir pressure to maintain the rate of oil production. A questionnaire was distributed to 48 experts at the top management level of the petroleum companies and the governmental authority. The data collected considered cost, efficiency, and environmental parameters. Based on the data, a statistical analysis was conducted using the factor analysis method to reduce the number of investigated variables. The analysis concluded that the optimal solution is to use the effluent injection method to discharge water produced with oil in Burgan and similar fields in Kuwait.