福州CRT产业集群废物产生特征及管理模式研究

根据对福州开发区阴离子射线管(CRT)产业集群进行调查、访谈和统计分析,实证研究了该产业集群的废物产生特征和管理模式.结果发现,福州CRT产业集群在不断发展壮大的同时,随着主导产品生产规模的扩大以及配套企业的进入,废物的产生总量不断增加,单位主导产品的废物产生强度持续上升,废物种类也逐渐丰富,给区域环境带来的压力不断增大;但同时,产业集群借助其规模和集聚效应,不仅为废物交换和工业共生体系的构建提供了基础平台,而且为专营性废物回收组织和处理处置设施的良好运转营造了外部环境.     

压裂废液处理技术研究进展

综述了当前油气井作业中压裂废液处理的一些主要技术:氧化法、混凝法、Fe/C微电解法、多种处理技术联合使用等,从六个方面探讨了当前处理方法中存在的主要问题,指出了压裂废液处理技术的一个重要研究方向是优化压裂废液处理工艺,开发稳定可靠,高效价廉且无二次污染的压裂废液处理剂。     

Effects of planned expansion of waste incineration in the Swedish district heating systems

Recent targets for reduced amounts of waste to landfills in Sweden will result in a large increase in waste incineration with recovery of energy, used primarily for district heating. The aim of this study is to investigate what changes in the usage of other fuels and technologies for district heat production would be caused by this increase. A questionnaire was sent out to the largest district heating companies, and simulations in an energy systems model were carried out. The analysis shows that increased waste incineration reduces the demand for other fuels, especially biomass, for district heat production. The effects include reductions in operating hours as well as the avoidance or postponement of investments in new plants for district heat production. Increased waste incineration will also lead to a greater use of district heating in Sweden.     

Sulfate removal from waste chemicals by precipitation

Chemical oxidation using Fenton's reagent has proven to be a viable alternative to the oxidative destruction of organic pollutants in mixed waste chemicals, but the sulfate concentration in the treated liquor was still above the acceptable limits for effluent discharge. In this paper, the feasibility of sulfate removal from complex laboratory wastewaters using barium and calcium precipitation was investigated. The process was applied to different wastewater cases (two composite samples generated in different periods) in order to study the effect of the wastewater composition on the sulfate precipitation. The experiments were performed with raw and oxidized wastewater samples, and carried out according to the following steps: (1) evaluate the pH effect upon sulfate precipitation on raw wastewaters at pH range of 2-8; (2) conduct sulfate precipitation experiments on raw and oxidized wastewaters; and (3) characterize the precipitate yielded. At a concentration of 80 g L(-1), barium precipitation achieved a sulfate removal up to 61.4% while calcium precipitation provided over 99% sulfate removal in raw and oxidized wastewaters and for both samples. Calcium precipitation was chosen to be performed after Fenton's oxidation; hence this process configuration favors the production of higher quality precipitates. The results showed that, when dried at 105 degrees C, the precipitate is composed of hemidrate and anhydrous calcium sulfate ( approximately 99.8%) and trace metals ( approximately 0.2%: Fe, Cr, Mn, Co, Ag, Mg, K, Na), what makes it suitable for reuse in innumerous processes.     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.     

Enhanced sludge solubilization by microbubble ozonation

A microbubble ozonation process for enhancing sludge solubilization was proposed and its performance was evaluated in comparison to a conventional ozone bubble contactor. Microbubbles are defined as bubbles with diameters less than several tens of micrometers. Previous studies have demonstrated that microbubbles could accelerate the formation of hydroxyl radicals and hence improve the ozonation of dyestuff wastewater. The results of this study showed that microbubble ozonation was effective in increasing ozone utilization and improving sludge solubilization. For a contact time of 80 min, an ozone utilization efficiency of more than 99% was obtained using the microbubble system, while it gradually decreased from 94% to 72% for the bubble contactor. The rate of microbial inactivation was obviously faster in the microbubble system. At an ozone dose of 0.02 g O₃ g⁻¹ TSS, about 80% of microorganisms were inactivated in the microbubble system, compared with about 50% inactivation for the bubble contactor. Compared to the bubble contactor, more than two times of COD and total nitrogen, and eight times of total phosphorus content were released from the sludge into the supernatant by using the microbubble system at the same ozone dosage. The application of microbubble technology in ozonation processes may provide an effective and low cost approach for sludge reduction.     

Using chemical models for evaluating the geochemical confinement capacity of a geological barrier application to the Centre de Stockage de l'Aube (France)

The feasibility of using a chemical reaction-based approach for evaluating and modelling the role of adsorption reactions in determining the geochernical confinement capacity of natural geological barriers is being studied as part of an on-going R & D programme. The confined superficial aquifer underlying the Centre de Stockage de l'Aube facility, a geological barrier for this site, has been used as a case study with the following aims. First, development of a site characterisation protocol and demonstration of its use to determine the principal geochemical characteristics of aquifer materials using batch experiments and to represent the information obtained in terms of a chemical model. The experimental results obtained for Ni²⁺ partitioning as a function of total Ni, pH, total Ca and total solid can be satisfactorily represented in terms of reactions with an ion exchange site and a single amphoteric surface hydroxyl site with ferrihydrite reaction constants. A second objective is the incorporation of the reactions in a coupled geochemistry/transport code, and to verify the applicability of the coupled code predictions for Ni²⁺ mass transfer by comparison with the results obtained during column tracer experiments. The breakthrough curve and equilibrium solid phase Ni loading, predicted by a one-dimensional coupled model for a column tracer experiment, agree closely with observed data.Additional studies are underway to reduce model conditionality, to extend the adsorption model to other analogue cations and anions, to incorporate the effect of natural organic matter and to take into consideration precipitation/dissolution of amorphous Fe surface phases.     

沈阳市工业固体废物排放总量控制

阐述了沈阳市工业固体废物基数核定方法及结果，总量控制基本原则，控制目标，控制措施，控制效果．     

固体废物管理技术进展

概述了固体废物管理技术近年来的主要进展,这些进展包括,固体废物从“摇蓝到坟墓”的全过程管理,即从废物产生到收集、运输贮存,再循环,再利用,处理直至最终处理过程所涉及到的：废物最小量化管理技术;废物转移跟踪管理中产生者,运输者,处理处理者,主管当局的职责、主管当局的职责,义务和管理方式;废物经营者向主管当局申请许可证的程序和申请。时,对废物交换制度和废物管理信息系统也作了概要介绍。     

我国城市垃圾产量预测

运用统计预测的方法对我国城市垃圾产量进行了预测 ,并对各时期的预测结果进行分段分析 ,阐明了影响全国垃圾产量的因素及其贡献大小。