Techno-economic evaluation of ultrasound and thermal pretreatments for enhanced anaerobic digestion of municipal waste activated sludge

To enhance the anaerobic digestion of municipal waste-activated sludge (WAS), ultrasound, thermal, and ultrasound + thermal (combined) pretreatments were conducted using three ultrasound specific energy inputs (1000, 5000, and 10,000 kJ/kg TSS) and three thermal pretreatment temperatures (50, 70 and 90 °C). Prior to anaerobic digestion, combined pretreatments significantly improved volatile suspended solid (VSS) reduction by 29-38%. The largest increase in methane production (30%) was observed after 30 min of 90 °C pretreatment followed by 10,000 kJ/kg TSS ultrasound pretreatment. Combined pretreatments improved the dimethyl sulfide (DMS) removal efficiency by 42-72% but did not show any further improvement in hydrogen sulfide (H₂S) removal when compared with ultrasound and thermal pretreatments alone. Economic analysis showed that combined pretreatments with 1000 kJ/kg TSS specific energy and differing thermal pretreatments (50-90 °C) can reduce operating costs by $44-66/ton dry solid when compared to conventional anaerobic digestion without pretreatments.     

Two stage fluid bed-plasma gasification process for solid waste valorisation: technical review and preliminary thermodynamic modelling of sulphur emissions

Gasification of solid waste for energy has significant potential given an abundant feed supply and strong policy drivers. Nonetheless, significant ambiguities in the knowledge base are apparent. Consequently this study investigates sulphur mechanisms within a novel two stage fluid bed-plasma gasification process. This paper includes a detailed review of gasification and plasma fundamentals in relation to the specific process, along with insight on MSW based feedstock properties and sulphur pollutant therein. As a first step to understanding sulphur partitioning and speciation within the process, thermodynamic modelling of the fluid bed stage has been performed. Preliminary findings, supported by plant experience, indicate the prominence of solid phase sulphur species (as opposed to H₂S) - Na and K based species in particular. Work is underway to further investigate and validate this.     

Waste plastics recycling by an entrained-flow gasifier

We studied an entrained-flow gasification process which efficiently converts waste plastics to energy at a high energy recovery rate. Waste plastics, after being shredded to <8 mm or <14 mm, were fed into an entrained-flow gasifier with air and oxygen. In the gasifier, organic substances were pyrolyzed, partially combusted, and then converted into synthetic gas (CO, H₂) at a high temperature (over 1600 K). The clarified gasification characteristics were that the lower heat value (LHV) of the product gas was over 4.2 MJ/Nm³ and the cold gas efficiency was approximately 60%. Other inert substances in the wastes such as ashes and metals were melted into slag and condensed on bag filters. The bag filters and a water scrubber removed impurities such as dusts, heavy metals, and hydrogen halides from the product gases. Solid hydrocarbons, which include char and soot, were removed at a hot cyclone and on the bag filters. Received: July 19, 2000 / Accepted: October 3, 2000     

Waste management issues for the UK ready-mixed concrete industry

The UK government has recognised the vital contribution that the construction industry has to play in contributing towards sustainable development. While the issue of hardened concrete waste has received considerable attention, process waste arising from the manufacture of ready-mixed concrete is relatively unexplored. It is apparent that initiatives such as the landfill tax have encouraged UK ready-mixed concrete manufacturers to reduce substantially the amount of waste they produce. Environmental pressures continue to increase and ready-mixed concrete producers are being forced towards a closed loop production system.     

铬的浸出毒性试验方法研究

以铬为分析指标,探讨了钻井废充泥浆在不同的提取剂、没的提取时间、不同的固液比以及不同的提取方式下铬的浸出毒性大小,提出了适合评价钻井废充泥浆中铬的浸出毒性的试验方法。     

Building partnerships — the Ohio Materials Exchange

This paper discusses a method by which individuals working in government, private business, not-for-profit and educational organizations developed a collaborative statewide program involving the exchange of materials from manufacturers, commercial business and not-for-profit organizations in Ohio.     

Environmental behaviour of a construction made of a mixture of hydraulic binders and air pollution control residues from municipal solid waste incineration Part 1. Physico-chemical characterisation and modelling of the source term

The reuse of waste materials requires the development of assessment methods for the long-term release of pollutants (source term) from wastes (or materials containing wastes) in contact with water. These methods depend on the scenario conditions: characteristics of the materials (especially physical structure and composition), contact with water. The scenario studied here is a water storage reservoir for fire fighting. The reservoir construction is made of a mixture of hydraulic binders and air pollution control (APC) residues from a municipal solid waste incinerator (MSWI). The modelling of the source term is performed in 5 steps ranging from the physico-chemical characterisation of the material to the validation of the proposed model by means of field simulation devices. This article presents the first steps of the methodology: physico-chemical characterisation of the source term, identification of the main transfer mechanisms and laboratory scale modelling of the source term. During the physico-chemical characterisation, it has been shown that the solidified waste shows a high basic capacity and that a relative decrease in pH during leaching favours retention of the main pollutants. During the first leaching sequences, the dynamic leaching tests show that the release of pollutants such as cadmium, arsenic, zinc and lead is extremely low but that the release of alkaline species (sodium and potassium) and chloride is very high from the beginning, whereas the release of calcium remains very high even after 3600 h of leaching. Identification of the main transfer mechanisms concludes that the release of soluble pollutants is the combined result of diffusional transfer of pollutants in the solution and the physico-chemical specificity of the species. The modelling based on these features enables a good simulation of the release but reveals a deviation from the experimental results after 500 h for alkaline species and 1000 h for Ca and Cl leaching. However, this deviation only appears after release of the major part of these elements.     

Evaluation of recycling policies for PET bottles based on multiattribute utility indices

This study focused on waste plastic, especially the polyethylene telephthalate (PET) bottle as representative waste, which has been assigned as goods to be recycled by the Packaging Waste Recycling Law in Japan. We developed a plastic transport model which explained the entire flow of plastic from the production stage to the disposal stage within an the evaluation model of plastic recycle policy based on multiattribute utility theory. This model is designed to be used by local municipal governments in supporting the evaluation of the PET bottle recycling policy. In evaluating the plastics recycling policy, we selected indices relating to economy, ecology, and rate of resource recycling. The results indicate that when the evaluation of the material recycling policy and thermal recycling policy in the model city were characterized in terms of their economic and environmental aspects the thermal recycling policy had the highest utility within our scenario. Received: July 31, 1998 / Accepted: January 26, 1999     

废弃物焚烧中二恶英类的发生与对策

重点探讨和论述了废弃物焚烧过程中极毒物质二恶英类的毒理,生成机构及生成途径,并从工程应用中提出了相应的对策.     

Desulfurization of coke oven gas from the coking of coking coal blended with a sorbent and waste plastic

A new way to implement the simultaneous reutilization of solid waste, the desulfurization of coke oven gas (COG), and even the desulfurization of coke by the co-coking of coking coal (CC) and waste plastic (WP) blended with a sorbent is proposed; the evolution of H₂S and the removal efficiency of H₂S from COG during the co-coking process were investigated in a lab-scale cylindrical reactor. The experimental results indicated that for the coking of CC blended with ZnO, Fe₂O₃, or blast furnace dust (BFD) as a sorbent, the instantaneous concentration of H₂S in COG was lower than 500 mg/m³ (which meets the technical specification requirement of the Chinese Cleaner Production Standard–Coking Industry, HJ/T 126-2003) when the molar ratio between the key component of the sorbent and the volatile S in CC or the CC/WP blend, n _Zn+Fe/n _S, was about 1.2 for ZnO and Fe₂O₃, but not for BFD under the same conditions, suggesting that ZnO and Fe₂O₃ are promising sorbents, but that BFD must be treated chemical or thermally before being used as a sorbent because of the size and complicated nature of the influence of its phase/chemical composition on its desulfurization ability. However, for the co-coking of CC and WP blended with ZnO as a sorbent, n _Zn+Fe/n _S must increase to 1.4 and 1.7 for 100/2 and 100/5 blends of CC/WP, respectively, to ensure a satisfactory efficiency for H₂S removal from COG. Part of this paper was presented at the International Symposium on EcoTopia Science 2005 (ISET05), Aug 8–9, 2005, Chikusa-ku, Nagoya, Japan