气相色谱法测定环境空气和废气中乙酸

以蒸馏水吸收环境空气或工业废气中的乙酸,用5%PEG20M+0 5%H3PO4ChromosorbHP80目～100目、2m×2mm玻璃填充柱分离,氢火焰离子化检测器检测,样品直接进气相色谱仪测定。方法最低检出质量浓度为0 16mg/m3,相对标准差为2%～5%,加标回收率在85%～106%之间。方法操作简便、快速。     

废水化学需氧量测定中稀释倍数的确定

根据化学需氧量测定原理和分析方法，推导出化学需氧量测定限，由测定限确定不同浓度废水化学需氧量测定的稀释倍数。     

可降解塑料生物降解性测试方法研究

通过对３种可陈解塑料生物降解性测试方法进行的实验研究，分析了各种方法的优缺点，对将来开发合理可行的标准测试方法提出了建议。     

氧化沟活性污泥膨胀的原因和控制

荆门石化污水处理场采用氧化沟处理工艺。针对在处理炼油污水过程中发生的污泥膨胀现象，根据运行数据，对活性污泥膨胀的原因进行分析和讨论，并提出建议。     

浅谈《锅炉大气污染物排放标准》

对GWPB3－1999《锅炉大气污染物排放标准》结构特点进行探讨,将GWPB3－1999与GBI3271－91进行比较。对GWPB3－1999中燃轻柴油炉排放污染物的项目增减提出建议,对锅炉排放监测工况提出看法。     

试论报废电子产品最终处置

报废电子产品的最终处理已成为全球性的环境话题。针对我国报废电子产品的最终处置现状，就政啊、生产者及消费者三方面各自所应承担的责任提出一些观点。     

Recycling, landfill consumption, and CO2 emission: analysis by waste input–output model

The emission of waste in an economy, including landfill, is to a large extent determined by its patterns of technology, institutions, and lifestyle. A mathematical model (the waste input–output model) is presented that gives a simple analytical representation of this interdependence. The model was used to evaluate the effects of alternative waste disposal and recycling options on the levels of industrial production, landfill consumption, and the emission of carbon dioxide, and also to analyze the overall dependence on landfill of individual industries. It was found that a systematic combination of the options could be effective in reducing the overall landfill consumption and carbon dioxide emission. Received: November 4, 2000 / Accepted: August 2, 2001     

Survey on the status of imported wastes used as raw material in China

 A survey was conducted on the status of imported waste steel–iron scrap and paper–cardboard, and their environmental impacts were analyzed based on the survey results. It was concluded that the importation of wastes will continue, and that it can be helpful to meet the steel–iron and paper-market demands. Some suggestions are offered to address these issues. Received: May 1, 2001 / Accepted: October 1, 2001     

Processing and Physical Properties of Plastics Made from Soy Protein Polyester Blends

Blending soy protein with polyesters using a polyvinyllactam as a compatibilizer successfully made soy protein-based plastics. The polyesters used to produce blends included polycaprolactone (PCL) and Biomax (a commercial biodegradable polyester). The blends were processed by compounding extrusion and injection molding. Blends containing soy protein/Biomax-poly(vinyl alcohol) had tensile strengths ranging from 16–22 MPa, with samples containing larger percentages of the synthetic polymer exhibiting greater strengths. Blends made from soy protein, Biomax, and PCL had tensile strengths ranging from 27–33 MPa. All the blends had high Young's moduli but demonstrated brittle characteristics as evident from their low elongations at break, ranging from 1.8–3.1%. Plastics made from soy protein/polyester blends exhibited low water absorption and had good stability under ambient conditions relative to the plastics made from soy protein alone. Blends made from soy protein flour produced plastics with the lowest water absorption.     

钢铁厂废气污染控制措施

以韶关钢铁厂为例，分析钢铁工业废气污染的特点，介绍钢铁工业废气污染控制技术的新进展。