Optimisation of zeolite LTA synthesis from alum sludge and the influence of the sludge source

Generation of alum sludge (AS) at drinking water treatment plants represents an environmental liability and adds to the cost of water purification. Consequently, this study explored the feasibility of using low and high carbon containing alum sludge from two water treatment plants to synthesize zeolite LTA. The hypothesis was that zeolite LTA synthesis was dependant upon alum sludge source and that a range of strategies may be required to optimize zeolite crystallinity. Zeolite characteristics such as morphology, phase composition, crystallinity, and particle size distribution were recorded. “One pot” hydrothermal synthesis of precursor gel with molar composition 4.2Na₂O:Al₂O₃:1.2SiO₂:168H₂O at 80°C for 3 hr resulted in 25 and 46 wt.% zeolite LTA from high and low carbonaceous sludge, respectively. Prior to hydrothermal reaction stage it was discovered that ageing of the gel, addition of zeolite LTA seeds, ultrasonic treatment and calcination all promoted zeolite LTA formation. Calcination of the alum sludge at 700°C for 2 hr before hydrothermal synthesis resulted in particle size reduction and the highest amount of crystalline zeolite LTA: 79 wt.% from low carbon sludge and 65 wt.% from high carbon sludge. Notably, the zeolite crystallinity reported in this study was the higher than previous studies on this topic. The outlined approach may allow value adding of alum waste and produce a commodity which could be used locally by the water treatment plant as a water softener.     

中国反食物浪费监测与评估体系建设

《中华人民共和国反食品浪费法》的颁布与实施,标志着中国的食物浪费从理论研究转向实践应用。为了推动食物浪费的减量,亟需构建覆盖全国的、系统性的监测和评估体系并实现食物浪费的定量监测与评估。本文面向《中华人民共和国反食品浪费法》实施过程政府及社会中各界的主要关切,通过系统梳理国内外食物浪费的相关研究,辨析了食物浪费的定义及主要演变,论述了全球食物浪费监测与评估情况。在此基础上,本文重点分析了中国食物浪费监测与评估进展,提出了通过餐厨垃圾,将食物浪费从传统概念向广义概念延伸的理念,并提出了适合中国国情的反食品浪费监测与评估指标。本文旨在为中国相关政府部门开展食物浪费的监测和评估提供科学参考,从而为全球可持续发展目标12.3的实现提供借鉴。     

Elemental mercury (Hg0) removal from coal syngas using magnetic tea-biochar: Experimental and theoretical insights

Mercury is ranked 3^rd as a global pollutant because of its long persistence in the environment. Approximately 65% of its anthropogenic emission (Hg⁰) to the atmosphere is from coal-thermal power plants. Thus, the Hg⁰ emission control from coal-thermal power plants is inevitable. Therefore, multiple sorbent materials were synthesized using a one-step pyrolysis method to capture the Hg⁰ from simulated coal syngas. Results showed, the Hg⁰ removal performance of the sorbents increased by the citric acid/ultrasonic application. T5CUF_0.3 demonstrated the highest Hg⁰ capturing performance with an adsorption capacity of 106.81 µg/g within 60 min at 200 °C under complex simulated syngas mixture (20% CO, 20% H₂, 10 ppmV HCl, 6% H₂O, and 400 ppmV H₂S). The Hg⁰ removal mechanism was proposed, revealing that the chemisorption governs the Hg⁰ removal process. Besides, the active Hg⁰ removal performance is attributed to the high dispersion of valence Fe₃O₄ and lattice oxygen (α) contents over the T5CUF_0.3 surface. In addition, the temperature programmed desorption (TPD) and XPS analysis confirmed that H₂S/HCl gases generate active sites over the sorbent surface, facilitating high Hg⁰ adsorption from syngas. This work represented a facile and practical pathway for utilizing cheap and eco-friendly tea waste to control the Hg⁰ emission.     

A waste management planning based on substance flow analysis

The paper describes the results of a municipal solid waste management planning based on an extensive utilization of material and substance flow analysis, combined with the results of specific life cycle assessment studies. The mass flow rates of wastes and their main chemical elements were quantified with a view to providing scientific support to the decision-making process and to ensure that the technical inputs to this process are transparent and rigorous. The role of each waste management option (recycling chains, biological and thermal treatments), as well as that of different levels of household source separation and collection (SSC), was quantitatively determined. The plant requirements were consequently evaluated, by assessing the benefits afforded by the application of high quality SSC, biological treatment of the wet organic fraction, and thermal treatment of unsorted residual waste. Landfill volumes and greenhouse gas emissions are minimized, toxic organic materials are mineralized, heavy metals are concentrated in a small fraction of the total former solid waste volume, and the accumulation of atmophilic metals in the air pollution control residues allows new recycling schemes to be designed for metals. The results also highlight that the sustainability of very high levels of SSC is reduced by the large quantities of sorting and recycling residues, amounts of toxic substances in the recycled products, as well as logistic and economic difficulties of obtaining very high interception levels. The combination of material and substance flow analysis with an environmental assessment method such as life cycle assessment appears an attractive tool-box for comparing alternative waste management technologies and scenarios, and then to support waste management decisions on both strategic and operating levels.     

A future perspective on lithium-ion battery waste flows from electric vehicles

As a proactive step towards understanding future waste management challenges, this paper presents a future oriented material flow analysis (MFA) used to estimate the volume of lithium-ion battery (LIB) wastes to be potentially generated in the United States due to electric vehicle (EV) deployment in the near and long term future. Because future adoption of LIB and EV technology is uncertain, a set of scenarios was developed to bound the parameters most influential to the MFA model and to forecast “low,” “baseline,” and “high” projections of future end-of-life battery outflows from years 2015 to 2040. These models were implemented using technology forecasts, technical literature, and bench-scale data characterizing battery material composition. Considering the range from the most conservative to most extreme estimates, a cumulative outflow between 0.33 million metric tons and 4 million metric tons of lithium-ion cells could be generated between 2015 and 2040. Of this waste stream, only 42% of the expected materials (by weight) is currently recycled in the U.S., including metals such as aluminum, cobalt, copper, nickel, and steel. Another 10% of the projected EV battery waste stream (by weight) includes two high value materials that are currently not recycled at a significant rate: lithium and manganese. The remaining fraction of this waste stream will include materials with low recycling potential, for which safe disposal routes must be identified. Results also indicate that because of the potential “lifespan mismatch” between battery packs and the vehicles in which they are used, batteries with high reuse potential may also be entering the waste stream. As such, a robust end-of-life battery management system must include an increase in reuse avenues, expanded recycling capacity, and ultimate disposal routes that minimize risk to human and environmental health.     

Economies of scale for future lithium-ion battery recycling infrastructure

While lithium-ion battery (LIB) technology has improved substantially to achieve better performance in a wide variety of applications, this technological progress has led to a diverse mix of batteries in use that ultimately require waste management. Development of a robust end-of-life battery infrastructure requires a better understanding of how to maximize the economic opportunity of battery recycling while mitigating the uncertainties associated with a highly variable waste stream. This paper develops and applies an optimization model to analyze the profitability of recycling facilities given current estimates of LIB technologies, commodity market prices of materials expected to be recovered, and material composition for three common battery types (differentiated on the basis of cathode chemistry). Sensitivity analysis shows that the profitability is highly dependent on the expected mix of cathode chemistries in the waste stream and the resultant variability in material mass and value. The potential values of waste streams comprised of different cathode chemistry types show a variability ranging from $860 per ton¹ for LiMn₂O₄ cathode batteries to $8900 per ton for LiCoO₂ cathode batteries. In addition, these initial results and a policy case study can also help to promote end-of-life management and relative policymaking for spent LIBs.     

The Austrian P budget as a basis for resource optimization

Phosphorus (P) is a finite and non-substitutable resource that is essential to sustaining high levels of agricultural productivity but is also responsible for environmental problems, e.g., eutrophication. Based on the methodology of Material Flow Analysis, this study attempts to quantify all relevant flows and stocks of phosphorus (P) in Austria, with a special focus on waste and wastewater management. The system is modeled with the software STAN, which considers data uncertainty and applies data reconciliation and error propagation. The main novelty of this work lies in the high level of detail at which flows and stocks have been quantified to achieve a deeper understanding of the system and to provide a sound basis for the evaluation of various management options. The budget confirms on the one hand the dependence of mineral P fertilizer application (2 kg cap⁻¹ yr⁻¹), but it highlights on the other hand considerable unexploited potential for improvement. For example, municipal sewage sludge (0.75 kg cap⁻¹ yr⁻¹) and meat and bone meal (0.65 kg cap⁻¹ yr⁻¹) could potentially substitute 70% of the total applied mineral P fertilizers. However, recycling rates are low for several P flows (e.g., 27% of municipal sewage sludge; 3% of meat and bone meal). Therefore, Austria is building up a remarkable P stock (2.1 kg P cap⁻¹ yr⁻¹), mainly due to accumulation in landfills (1.1 kg P cap⁻¹ yr⁻¹) and agricultural soils (0.48 kg P cap⁻¹ yr⁻¹).     

Costs and benefits of packaging waste recycling systems

This Special Issue provides several different perspectives on the complex issue of packaging waste recycling. It comprises a diverse and rich set of contributions with insights from very different disciplines that range from economics to engineering. All types of “costs and benefits” are addressed in this collection of articles. In addition to the economic and strictly financial impacts of selective collection and sorting of packaging waste, several authors discuss other types of impacts, such as the environmental and social ones. The reader will find articles that address recycling systems as a whole, pieces that focus on specific impacts and detailed discussions of particular material streams or waste management strategies. The Special Issue represents an indispensable resource for academics, policy-makers and practitioners with interests in recycling and packaging waste management.     

Closed loop recycling of plastics containing Flame Retardants

Annually 2.7 million tonnes of plastics containing Flame Retardants (FRs) are globally discarded in Waste Electrical and Electronic Equipment (WEEE). Little is known on the feasibility of closing material loops for FR plastics. Therefore, series of experiments were set up to analyze the feasibility of separating plastics containing FRs from one specific product category, namely End-of-Life (EoL) Liquid Crystal Display (LCD) TVs. The characterization of the housings of this waste stream indicated a concentration of 18 wt% Bromine based (Br) FRs and 31 wt% Phosphor based (P) FRs, the remainder not containing FRs. With practical tests it was demonstrated that, after disassembly and plastic identification, the co-polymer poly-carbonate (PC)/acrylonitrile-butadiene-styrene (ABS) containing PFR can be recycled in a closed loop system. Based on the determined plastic density distributions and separation efficiencies of optical sorters, a purity of 82% was calculated for PFR PC/ABS separated from EoL LCD TVs after size-reduction (shredding). Performed miscibility tests indicated that for this fraction at least a factor 10 dilution with virgin material is required. In addition, higher waste volumes are required for a size-reduction based treatment to become economically viable and technical challenges still need to be faced, whereas closed loop recycling of PFR PC/ABS from the current waste stream of EoL LCD TVs of different brands in a disassembly based treatment is found to be technically feasible and economically viable under European boundary conditions.     

Effect of Ca:Mg ratio and high ammoniacal nitrogen on characteristics of struvite precipitated from waste activated sludge digester effluent

This study revealed the relationship between the presence of calcium impurities and ammoniacal nitrogen concentration upon crystallization of struvite. The research hypothesis was that the presence of both calcium and high concentrations of ammoniacal nitrogen(328–1000 mg/L) in waste activated sludge may influence the struvite quality and acid stability. Hence, we studied the impact of Ca:Mg ratio upon morphology, particle size, purity and dissolution of struvite, in the presence of varying levels of excess ammoniacal nitrogen. X-ray diffraction revealed that up to 31.4%amorphous material was made which was assigned to hydroxyapatite. Increasing the ammoniacal nitrogen concentration and elevation of the Mg:Ca ratio maximized the presence of struvite. Struvite particle size was also increased by ammoniacal nitrogen as was twinning of the crystals. Tests with dilute solutions of organic acid revealed the sensitivity of struvite dissolution to the physical characteristics of the struvite. Smaller particles(21.2 μm) dissolved at higher rates than larger particles(35.86 μm). However,struvite dissolved rapidly as the p H was further reduced irrespective of the physical characteristics. Therefore, addition of struvite to low p H soils was not viewed as beneficial in terms of controlled nutrient release. Overall, this study revealed that waste activated sludge effluent with high ammoniacal nitrogen was prospective for synthesis of high quality struvite material.