The city of San José's integrated waste management program: a case study for reaching high levels of diversion

The city of San José, California, USA, has a widely recognized integrated waste management program and is currently diverting close to 50% of its waste stream from landfill disposal. This paper describes the residential and commercial components of the city's waste management program. Information is presented on performance (e.g., types and quantities of materials that are collected, processed, and disposed of), customer service, and costs associated with the program. Received: October 4, 2000 / Accepted: February 15, 2001     

城市生活垃圾堆肥厂中的除臭技术

本文分析了垃圾堆肥厂臭气的来源，臭气的成份，介绍了脱臭技术及其设计参数，提出了在垃圾堆肥厂的设计建设中应重视臭气污染，除臭设施应同步建设的观点。     

Engineering properties of asphalt concrete made with recycled glass

Taiwan is an island nation with high population density: 23 million people living in a total land area of 30 000 sq. km. The island has transformed from an agricultural society to an industrial one in the past three decades. Coming with the transformation is a cumulated waste problem. Taiwan produces nearly 5 million tons of waste each year, of which 10% is of glass materials. Bureau of Highway Department funded a research program to investigate ways of recycling the glass waste. This report presents information on the program and laboratory/field test data. Materials used in the test program included 85/100 asphalt, Type II modified asphalt, and treated glass waste. Four glass contents: 0, 5, 10, and 15%, in terms of the total aggregate weight, were used in the mixture designs for casting series of 10 cm diameter by 6.35 cm disk specimens. Tests including Marshall stability value, dry/wet moisture damage, skid resistance, light reflection, water permeability, and compaction were carried out in accordance with the ASTM and AASHTO procedures. The test results reveal that glass waste is a viable material for asphalt concrete that has been widely used in pavement that offers profound engineering and economic advantages.     

Mixed signals: market incentives, recycling, and the price spike of 1995

Environmental economics assumes that reliance on price signals, adjusted for externalities, normally leads to efficient solutions to environmental problems. We explore a limiting case, when market volatility created ‘mixed signals’: prices of waste paper and other recycled materials were suddenly extremely high in 1994–1995, then plummeted back to traditional low levels in 1996. These rapid reversals resulted in substantial economic and political costs. A review of academic and business literature suggests six possible explanations for abrupt price spikes. An econometric analysis of the prices of wood pulp and waste paper shows that factor which explained price changes in 1983–1993 contribute very little to understanding the subsequent price spike. From the econometric analysis and from other sources, we conclude that speculation must have played a major role in the price spike, perhaps in combination with modest effects from changes in government policy and in export demand. If speculatively driven price spikes can disrupt an environmentally important industry such as recycling, what is the appropriate role for public policy? When price volatility is sufficiently disruptive, then measures to control or stabilize prices, rather than interfering with the market, might help to make it more efficient.     

造纸工业废水资源化途径的新探讨

本文从造纸工业废水治理技术现状分析入手,讨论了目前用于处理造纸黑液和白水的主要处理工艺及其特点。在此基础上,提出了造纸工业废水尤其是造纸黑液综合利用的新途径。着重对造纸工业废水污灌作了重点的分析,对用造纸黑液作为型煤粘合剂和水煤浆生产工艺用水作了探讨性分析,为造纸工业废水尤其是造纸黑液资源化途径的探讨提出了新思路。     

黄磷厂废渣作水泥混合材的研究

本文较系统地研究了影响黄磷渣作水泥混合材的因素；推荐了提高黄磷渣作水泥混合材的掺量必须控制的条件；按推荐的控制条件，黄磷渣作水泥混合材的掺量可高达４０％以上。     

The influence of soil macroinvertebrates on primary biodegradation of starch-containing polyethylene films

The primary biodegradability of polyethylene (PE) films containing different percentages of cornstarch (0–50%) and other additives (prooxidant, oxidized polyethylene) was tested using four species of earthworms (Eisenia fetida, Lumbricus terrestris, Aporectodea trapezoides, Aporectodea tuberculata), three species of cockroaches (Periplaneta americana, Blaberus sp.,Blattella germanica), termites (Reticulotermes flavipes), sowbugs (Porcellio laevis), and crickets (Acheta domesticus). These studies were conducted to elucidate the potential role of soil macroinvertebrates in degrading starch/PE biodegradable plastics. The results of the macroinvertebrate bioassays indicate that crickets, cockroaches, and sowbugs consumed starch-containing PE films most readily. In addition, the degree to which the films were attacked and consumed was directly related to the starch content of the film. Films with oxidized polyethylene and those containing prooxidant (vegetable oil and a transition metal catalyst) were also consumed. None of the four species of earthworms tested or the termites showed any activity toward the starch/polyethylene films. These results have important implications for determining the fate of novel plastic formulations which claim to be biodegradable in natural environments. Studies such as these, coupled with studies on microbial degradation, will help provide the type of information needed to assess the environmental fate of biodegradable starch/PE plastics and fill the voids in the scientific database regarding this rapidly developing field.     

Pure-culture and enzymatic assay for starch-polyethylene degradable plastic biodegradation withStreptomyces species

Eleven starch-polyethylene degradable plastic films were prepared from masterbatches from Archer Daniels Midland Inc. (ADM), EcoStar Inc. (SLS), and Fully Compounded Plastic Inc. The biodegradability of initial and 70°C heat-treated materials was determined using a pure-culture assay withStreptomyces badius 252,S. setonii 75Vi2, orS. viridosporus T7A or without bacterial culture (control). Films were treated with 10-foldS. setonii culture concentrates and compared with inactive enzyme controls. Changes in each films mechanical property, molecular weight distribution, and Fourier-transformed infrared spectrum (FT-IR) were determined, and results were evaluated for significant differences by analysis of variance. Cell mass accumulation on each film was quite pronounced. In pure-culture studies, biodegradation was demonstrated for ADM-7 and SLS-2 initial films and for ADM-6 heat-treated films, whereas after 3-week treatment with activeS. setonii culture concentrates (enzyme assay), reductions in mechanical properties and changes in FT-IR spectrum were illustrated by all the films except SLS-2. Thus the absence of biofilm formation on the film surface permitted enzymatic attack of the materials. Furthermore, inhibition of chemical oxidative degradation in the pure-culture assay was demonstrated for ADM-11, SLS-5, and SLS-10 initial materials and for ADM-4, ADM-7, SLS-8, and SLS-10 heat-treated films. These data suggest that biological and chemical degradation were directly affected by the reduction in oxygen tension on the plastic film surface due to cell mass accumulation. This same phenomenon could be the cause for slow degradation rates in nature.Journal Paper No. J-15061 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project Nos. 0178 and 2889.     

Environmental assessment of packaging: Sense and sensibility

The functions of packaging are derived from product requirements, thus for insight into the environmental effects of packaging the actual combination of product and package has to be evaluated along the production and distribution system. This extension to all related environmental aspects adds realism to the environmental analysis and provides guidance for design while preventing a too detailed investigation of parts of the production system. This approach is contrary to current environmental studies where packaging is always treated as an independent object, neglecting the more important environmental effects of the product that are influenced by packaging. The general analysis and quantification stages for this approach are described, and the currently available methods for the assessment of environmental effects are reviewed. To limit the workload involved in an environmental assessment, a step-by-step analysis and the use of feedback is recommended. First the dominant environmental effects of a particular product and its production and distribution are estimated. Then, on the basis of these preliminary results, the appropriate system boundaries are chosen and the need for further or more detailed environmental analysis is determined. For typical food and drink applications, the effect of different system boundaries on the outcome of environmental assessments and the advantage of the step-by-step analysis of the food supply system is shown. It appears that, depending on the consumer group, different advice for reduction of environmental effects has to be given. Furthermore, because of interrelated environmental effects of the food supply system, the continuing quest for more detailed and accurate analysis of the package components is not necessary for improved management of the environmental effects of packaging.     

An economic analysis of different types of formal and informal entrepreneurs, recovering urban solid waste in Bangalore (India)

The recycling sector in India, which consists of a comprehensive trade and production sector, is rather complex. Nevertheless, it creates important benefits for both the economy and the environment. In order to comprehend the system, a case study has been performed on the recycling sector (paper, plastic, glass and non-ferrous metal) in Bangalore (India), focussing on the market structure, the scale of operation, employment effects, constraints, and recent developments. It was found that this highly competitive and labour-intensive industry is largely dependent on cheap labour and the supply of solid waste from the local trade system. Its mostly informal nature results from the ‘unregisteredness’ of the materials. Consequently, government involvement is avoided as much as possible. With present growth rates, prospects of recycling in Bangalore are advancing. Yet, problems such as lack of supply and loss of quality emerge. Therefore, quality control and market conditions should be improved.