优势微生物强化水解—多级接触氧化工艺处理屠宰废水

结合工程实例,本文对优势微生物强化水解—多级接触氧化处理屠宰废水工艺及设计体会进行了讨论。设计进水COD、BOD5、SS、NH3-N、动植物油为2300~2700mg/L、900~1300mg/L、600~800mg/L、100~120mg/L、70~90mg/L,出水为90mg/L、20mg/L、60mg/L1、0mg/L1、0 mg/L。实际运行结果表明:主要出水指标COD、BOD5、SS、NH3-N、动植物油的去除率分别可达到97.9%、98.6%、93.7%、93.4%、90.7%。该工艺具有占地少、建设成本低、运行可靠、稳定达标、剩余污泥少、运行成本低、维护简便等优点。     

我国医疗废物可持续管理措施探讨

回顾了我国医疗废物管理和处置取得的成果,分析了我国医疗废物管理和处置的现状与不足,从生命周期和全过程管理体系的建立、技术研发和技术应用,以及监督和监测、技术培训和经济运行机制等方面提出了实现我国医疗废物可持续管理的对策与措施。     

浅谈城市生活垃圾填埋场环境影响评价要点

根据目前我国卫生填埋场的实际情况,对生活垃圾填埋场工程环境影响评价中场址的选择、渗滤液处理、清洁生产、污染控制方法经济技术可行性分析以及封场后的生态恢复等进行了阐述。     

木炭窑废气治理方法研究

近年来木炭的新用途及作为新材料的研究开发十分活跃,使该行业市场前景被看好.但木炭窑废气造成的环境污染严重的制约了该行业的发展.目前比较多的木炭窑规模较小,布局分散,应尽量选择投资少、运行费用低的治理方法以利于解决实际问题.     

An environmental evaluation of geopolymer based concrete production: reviewing current research trends

In this study we carry out a detailed environmental evaluation of geopolymer concrete production using the Life Cycle Assessment methodology. The literature shows that the production of most standard types of geopolymer concrete has a slightly lower impact on global warming than standard Ordinary Portland Cement (OPC) concrete. Whilst our results confirm this they also show that the production of geopolymer concrete has a higher environmental impact regarding other impact categories than global warming. This is due to the heavy effects of the production of the sodium silicate solution. Geopolymer concrete made from fly ashes or granulated blast furnace slags based require less of the sodium silicate solution in order to be activated. They therefore have a lower environmental impact than geopolymer concrete made from pure metakaolin. However, when the production of fly ashes and granulated blast furnace slags is taken into account during the life cycle assessment (using either an economic or a mass allocation procedure), it appears that geopolymer concrete has a similar impact on global warming than standard concrete. This study highlights that future research and development in the field of geopolymer concrete technology should focus on two potential solutions. First of all the use of industrial waste that is not recyclable within other industries and secondly on the production of geopolymer concrete using a mix of blast furnace slag and activated clays. Furthermore geopolymer concrete production would gain from using waste material with a suitable Si/Al molar ratio in order to minimise the amount of sodium silicate solution used. Finally, by taking into account mix-design technology, which has already been developed for OPC concrete, the amount of binder required to produce a geopolymer concrete could be reduced.     

Frequency Control Characteristics of a Direct-Mode Untreated Sewage Source Heat Pump in the Heating Mode

An untreated sewage source heat pump system directly makes use of the urban raw sewage instead of that treated by a sewage plant. At present In China, most systems adopt the indirect mode for avoiding the harmful effect of the sewage on the heat pump unit. In this article a direct-mode untreated sewage source heat pump system, which shows less theoretical analysis of the mathematical model, is theoretically designed and analyzed to simulate the system dynamic characteristics in the heating mode. The results show that the system COP changes from 4.1 to 3.4 and the heating capacity from 9.5 to 15.3 kW when the sewage inlet temperature is 12°C and the frequency increases from 18 to 32 HZ. The condenser heat-transfer coefficient increases with the frequency reducing while the change trend of evaporator heat-transfer coefficient is the opposite. The highest values of them are 303 and 1617 W.m^?2?K^?1, respectively. The frequency control simulation supplies the operation adjustment with theoretical instructions and some reference values.     

Greenhouse gas emission and its potential mitigation process from the waste sector in a large-scale exhibition

As one of the largest human activities, World Expo is an important source of anthropogenic Greenhouse Gas emission (GHG), and the GHG emission and other environmental impacts of the Expo Shanghai 2010, where around 59,397 tons of waste was generated during 184 Expo running days, were assessed by life cycle assessment (LCA). Two scenarios, i.e., the actual and expected figures of the waste sector, were assessed and compared, and 124.01 kg CO₂-equivalent (CO₂-eq.), 4.43 kg SO₂-eq., 4.88 kg NO₃⁻-eq., and 3509 m³ water per ton tourist waste were found to be released in terms of global warming (GW), acidification (AC), nutrient enrichment (NE) and spoiled groundwater resources (SGWR), respectively. The total GHG emission was around 3499 ton CO₂-eq. from the waste sector in Expo Park, among which 86.47% was generated during the waste landfilling at the rate of 107.24 kg CO₂-eq., and CH₄, CO and other hydrocarbons (HC) were the main contributors. If the waste sorting process had been implemented according to the plan scenario, around 497 ton CO₂-eq. savings could have been attained. Unlike municipal solid waste, with more organic matter content, an incineration plant is more suitable for tourist waste disposal due to its high heating value, from the GHG reduction perspective.     

Distribution and leaching characteristics of trace elements in ashes as a function of different waste fuels and incineration technologies

Impact of waste fuels (virgin/waste wood, mixed biofuel (peat, bark, wood chips) industrial, household, mixed waste fuel) and incineration technologies on partitioning and leaching behavior of trace elements has been investigated. Study included 4 grate fired and 9 fluidized boilers. Results showed that mixed waste incineration mostly caused increased transfer of trace elements to fly ash; particularly Pb/Zn. Waste wood incineration showed higher transfer of Cr, As and Zn to fly ash as compared to virgin wood. The possible reasons could be high input of trace element in waste fuel/change in volatilization behavior due to addition of certain waste fractions. The concentration of Cd and Zn increased in fly ash with incineration temperature. Total concentration in ashes decreased in order of Zn > Cu > Pb > Cr > Sb > As > Mo. The concentration levels of trace elements were mostly higher in fluidized boilers fly ashes as compared to grate boilers (especially for biofuel incineration). It might be attributed to high combustion efficiency due to pre-treatment of waste in fluidized boilers. Leaching results indicated that water soluble forms of elements in ashes were low with few exceptions. Concentration levels in ash and ash matrix properties (association of elements on ash particles) are crucial parameters affecting leaching. Leached amounts of Pb, Zn and Cr in > 50% of fly ashes exceeded regulatory limit for disposal. 87% of chlorine in fly ashes washed out with water at the liquid to solid ratio 10 indicating excessive presence of alkali metal chlorides/alkaline earths.     

城市生活垃圾源减量化技术与对策

解决垃圾问题最好的方式是避免其产生,这样就无需收集、运输或处置。此外,源减量化在能源利用、温室气体排放和其他环境影响方面,要远优于其他诸如焚烧和填埋等处理方式。生活垃圾源减量化具有环境和经济的双重效益。本文阐述了生活垃圾源减量化的概念和特征,并通过借鉴美国在生活垃圾源减量化问题上的成功经验和成熟技术,探讨了适合上海的生活垃圾源减量化对策。     

应用PSB处理乳品厂废水的试验研究

采用炭渣填料固定PSB混合菌膜技术,对乳品厂废水处理进行试验研究?阐述了工艺流程?工艺参数及效果分析?结果表明,出水各项指标均达到排放标准?CODCr,BOD5,SS,S2-,油类去除率分别为97%,98%,96%,86%,88%?