废旧锌锰电池回收处理工艺的探讨

由于电池耗费量日益增加,废旧电池导致的环境污染问题倍受关注。通过对废旧电池的调研和处理技术的对比研究,提出了“焙烧—电解”回收处理废旧锌锰电池的工艺技术。在600℃、隔绝空气焙烧3h的试验条件下,“焙烧—电解”工艺不仅可回收大量的二氧化锰、锌、氯化锌、炭棒、铜帽、铁皮、蜡等资源,而且废气、废水、废渣经处理后完全达标排放。阐述了具体的“焙烧—电解”工艺。     

国家半导体行业VOC排放标准制订研究

随着近年来我国半导体产业的持续繁荣发展,中国已成为全球半导体制造增长最为迅速的市场。为有效控制监管半导体生产过程中大量使用的各种有机溶剂所产生的废气中可挥发性有机物(VOC)的排放,加强行业污染控制,规范行业环境保护管理工作,对制订半导体行业VOC排放标准进行了研究。概述了半导体行业VOC排放的特点。分析了该行业对VOC排放的治理技术。阐述了美国和中国台湾地区有关半导体行业VOC废气的排放标准。从国内半导体企业VOC治理现状、现有监测技术、VOC排放管理方式等方面探讨了我国半导体行业VOC废气排放标准的制定思路。     

城市生活垃圾焚烧重金属研究分析

以当前我国城市生活垃圾焚烧处理现状为依据,通过文献综述法详细介绍了城市垃圾焚烧过程中重金属的迁移及分布规律,并提出重金属污染防控对策建议。     

Calcium carbonate waste from an integrated pulp and paper mill as a potential liming agent

Calcium carbonate is used in large amounts in the pulp and paper industry as a paper filler. When it is manufactured, the calcium carbonate waste is purged from the process. Here we demonstrate that, due to the elevated calcium concentration of 168.5 g kg⁻¹ dry weight (dw), alkaline pH of 12.6 and neutralizing (liming) effect value of 42.4% expressed as Ca equivalents, this waste is a potential liming agent and a pH buffer. The heavy metal concentrations in the waste were lower than the new Finnish limit values for fertilizers used in agriculture, as well as for a material, e.g. ash, used as an earth construction agent. These limit values came into force in March 2007 and in June 2006, respectively.     

A critical review of the emerging research on the detection and assessment of microplastics pollution in the coastal,marine, and urban Bangladesh

● Coastal and marine regions are the most studied for microplastic pollution. ● Tourism is a major cause of microplastic pollution in coastal regions. ● Sediments contain larger microplastics while fish ingest smaller microplastics. ● Inland lakes, rivers, and freshwater fish are impacted by microplastic pollution. ● Microplastics are found in edible salts, however, presence is less in refined salt. The research on the extent and effects of microplastics pollution in the Global South is only getting started. Bangladesh is a South Asian country with one of the fastest growing economies in the world, however, such exponential economic growth has also increased the pollution threats to its natural and urban environment. In this paper, we reviewed the recent primary research on the assessment of the extent of microplastics pollution in Bangladesh. From the online databases, we developed a compilation of emerging research articles that detected and quantified microplastics in different coastal, marine, and urban environments in Bangladesh. Most of the studies focused on the coastal environment (e.g., beach sediment) and marine fish, while limited data were available for the urban environment. We also discussed the relationship of the type of anthropogenic activities with the observed microplastic pollution. The Cox’s Bazar sea beach in south-east Bangladesh experienced microplastics pollution due to tourism activities, while fishing and other anthropogenic activities led to microplastics pollution in the Bay of Bengal. While microplastics larger than 1 mm were prevalent in the beach sediments, smaller microplastics with size below 0.5 mm were prevalent in marine fish samples. Moreover, the differences in microplastic abundance, size, shape, color, and polymer type found were depended on the sampling sites and relevant anthropogenic activities. It is imperative to identify major sources of microplastics pollution in both natural and urban environment, determine potential environmental and human health effects, and develop mitigating and prevention strategies for reducing microplastics pollution.     

废弃轮胎爆破回收技术研究

废弃轮胎爆破回收技术是利用炸药在仓内爆炸所产生的巨大能量对废弃轮胎进行爆破,使轮胎在瞬间发生破碎,处理工艺简单,基本上不需要大型机械设备。     

Effect of aging level on viscoelastic properties of asphalt binder containing waste polyethylene

Due to inherent advantages, waste polyethylene (generated from domestic sources) has been used as asphalt modifier. This article discusses viscoelastic properties of the polyethylene modified asphalt binder. Several asphalt concrete mixtures were designed by varying polyethylene and asphalt content. Shredded polyethylene incorporated into asphalt concrete by dry mixing process. Using optimised asphalt content (at several polyethylene percentages), mixtures were prepared and compacted. These compacted specimens were aged for different duration in convection oven. Asphalt binder (from aged specimens) was extracted and tested for its viscoelastic properties using dynamic shear rheometer. Comparison of mastercurves indicated increase in complex modulus and decrease in phase angle values with addition of polyethylene at all reduced frequencies. However, the extent of change was highly dependent on frequency, aging duration and polyethylene content. This indicates that the addition of polyethylene provides more resilience to asphalt binder especially with less aging time. Storage modulus mastercurves (at lower frequencies) and relaxation modulus values (at longer time) indicate polyethylene provides additional stiffening to binder. Further, changes in viscous modulus with addition of polyethylene were marginal. Overall results indicate that waste polyethylene improves the properties of asphalt binder over extended loading period when heated for less time during mixing.     

Biodegradation of waste refrigerator polyurethane by mealworms

● Waste refrigerator polyurethane (WRPU) was ingested and biodegraded by mealworms. ● The carbon in WRPU-based frass was lower than that in WRPU. ● Urethane groups in WRPU were broken down after ingestion by mealworms. ● Thermal stability of WRPU-based frass were deteriorated compared to that of WRPU. ● Gut microbiomes of mealworms fed using WRPU were distinct from that fed using bran. Refrigerator insulation replacement results in discarding a large amount of waste refrigerator polyurethane (WRPU). Insect larvae like mealworms have been used to biodegrade pristine plastics. However, knowledge about mealworms degrading WRPU is scarce. This study presents an in-depth investigation of the degradation of WRPU by mealworms using the micro-morphology, composition, and functional groups of WRPU and the egested frass characteristics. It was found that the WRPU debris in frass was scoured, implying that WRPU was ingested and degraded by mealworms. The carbon content of WRPU-based frass was lower than that of WRPU, indicating that mealworms utilized WRPU as a carbon source. The urethane groups in WRPU were broken, and benzene rings’ C=C and C–H bonds in the isocyanate disappeared after being ingested by mealworms. Thermal gravimetric-differential thermal gravimetry analysis showed that the weight loss temperature of WRPU-based frass was 300 °C lower than that of WRPU, indicating that the thermal stability of WRPU deteriorated after being ingested. The carbon balance analysis confirmed that carbon in the ingested WRPU released as CO₂ increased from 18.84 % to 29.80 %, suggesting that WRPU was partially mineralized. The carbon in the mealworm biomass ingesting WRPU decreased. The possible reason is that WRPU does not supply sufficient nutrients for mealworm growth, and the impurities and odor present in WRPU affect the appetite of the mealworms. The microbial community analysis indicated that WRPU exerts a considerable effect on the gut microorganism of mealworms. These findings confirm that mealworms degrade WRPU.     

Economic benefits from food recovery at the retail stage: An application to Italian food chains

The food supply chain is affected by losses of products near to their expiry date or damaged by improper transportation or production defects. Such products are usually poorly attractive for the consumer in the target market even if they maintain their nutritional properties. On the other hand undernourished people face every day the problem of fulfilling their nutritional needs usually relying on non-profit organizations. In this field the food recovery enabling economic benefits for donors is nowadays seen as a coherent way to manage food products unsalable in the target market for various causes and thus destined to be discarded and disposed to landfill thus representing only a cost. Despite its obvious affordability the food recovery is today not always practiced because the economic benefits that could be achieved are barely known. The paper aims at presenting a deterministic mathematical model for the optimization of the supply chain composed by retailers and potential recipients that practice the food recovery, taking into account the benefits recognized to donors and the management costs of the food recovery. The model determines the optimal time to withdraw the products from the shelves as well as the quantities to be donated to the non-profit organizations and those to be sent to the livestock market maximizing the retailer profit. The results show that the optimal conditions ensuring the affordability of the food recovery strategy including the tax reliefs and cost saving for the retailers outperforms the profit achievable in absence of such a system.     

Statistical analysis in MSW collection performance assessment

The increase of Municipal Solid Waste (MSW) generated over the last years forces waste managers pursuing more effective collection schemes, technically viable, environmentally effective and economically sustainable. The assessment of MSW services using performance indicators plays a crucial role for improving service quality. In this work, we focus on the relevance of regular system monitoring as a service assessment tool. In particular, we select and test a core-set of MSW collection performance indicators (effective collection distance, effective collection time and effective fuel consumption) that highlights collection system strengths and weaknesses and supports pro-active management decision-making and strategic planning. A statistical analysis was conducted with data collected in mixed collection system of Oporto Municipality, Portugal, during one year, a week per month. This analysis provides collection circuits’ operational assessment and supports effective short-term municipality collection strategies at the level of, e.g., collection frequency and timetables, and type of containers.