Non-conventional gas phase remediation of volatile halogenated compounds by dehydrated bacteria

Traditional biological removal processes are limited by the low solubility of halogenated compounds in aqueous media. A new technology appears very suitable for the remediation of these volatile organic compounds (VOCs). Solid/gas bio-catalysis applied in VOC remediation can transform halogenated compounds directly in the gas phase using dehydrated cells as a bio-catalyst.     

Balancing Conservation and Economic Sustainability: The Future of the Amazon Timber Industry

Logging has been a much maligned feature of frontier development in the Amazon. Most discussions ignore the fact that logging can be part of a renewable, environmentally benign, and broadly equitable economic activity in these remote places. We estimate there to be some 4.5 ± 1.35 billion m³ of commercial timber volume in the Brazilian Amazon today, of which 1.2 billion m³ is currently profitable to harvest, with a total potential stumpage value of $15.4 billion. A successful forest sector in the Brazilian Amazon will integrate timber harvesting on private lands and on unprotected and unsettled government lands with timber concessions on public lands. If a legal, productive, timber industry can be established outside of protected areas, it will deliver environmental benefits in synergy with those provided by the region’s network of protected areas, the latter of which we estimate to have an opportunity cost from lost timber revenues of $2.3 billion over 30 years. Indeed, on all land accessible to harvesting, the timber industry could produce an average of more than 16 million m³ per year over a 30-year harvest cycle—entirely outside of current protected areas—providing $4.8 billion in returns to landowners and generating $1.8 billion in sawnwood sales tax revenue. This level of harvest could be profitably complemented with an additional 10% from logging concessions on National Forests. This advance, however, should be realized only through widespread adoption of reduced impact logging techniques.     

Health benefits valuation of regulatory intervention for air pollution control in thermal power plants in Delhi,India

This study estimates minimum marginal health benefits (morbidity reduction only) of air pollution control and total health benefits arising from regulatory intervention regarding the adoption of the World Bank emission guidelines (WBEG) for thermal power plants (TPPs) in Delhi. The Industrial Source Complex-Short-Term Version–3 (ISCST3) model has been used to estimate the contribution to air pollution from TPPs. The household health production function (avertive behaviour) has been used to value health benefits of air pollution control. The study revealed that the ambient air pollution due to TPPs is reduced by between 62.17% to 83.45% by adopting the WBEG. Annual marginal benefit due to reduction in exposure to air pollution by 1 μg m^?3 is estimated to be US$0.353 per person. Total annual health benefits for adopting the WBEG for TPPs are estimated at US$235.19 million. This study provides a novel methodology to evaluate health benefits of regulatory intervention.     

河网水质模型研究进展

纵观水质模型的研究、应用及相关科学的发展,本文针对现有的水质模型做了分析评价,简要介绍了河网水质模型的未来研究趋势,并提出了几点建议。     

基于“反规划”视角的乡村旅游规划新途径探析

引入"反规划"思想,针对传统规划方法给乡村旅游带来的不利影响,强调"反规划"在乡村旅游规划中应用的必要性与可行性。通过与传统规划方法进行对比分析发现,当前乡村旅游规划中存在不少亟待解决的问题。同时,探析了"反规划"思想在乡村旅游规划中的运用,建立乡村旅游"反规划"发展模式为保障乡村旅游可持续性发展提供了理论依据。     

应用CALINE4模式估算机动车排放污染物的浓度——以济南市主干道为例

随着经济的快速发展,机动车排气污染已成为我国城市空气污染的重要来源,而且在一定时段,机动车排气污染已成为空气污染最主要的污染源之一。以济南市经十路为例,采用实地调查的方法,得出各时段的车流量,选用大气环评助手EIAA中的CALINE4模式对机动车尾气中的主要污染物CO、NOx、THC的排放浓度进行估算,得出3种污染物CO、NOx、THC最大值均出现在7:00—8:00之间,最小值均出现在12:00-13:00之间,排放强度由大到小为:CO、THC、NOx。     

沟谷泥石流运动过程模型试验

泥石流运动过程是泥石流运动力学核心内容之一.以新疆天山公路K630泥石流为原型,选取几何相似比1:650,推导了泥石流质量、固液两相流速和泥石流冲击力相似比,以流通区为核心,建造了沟谷泥石流试验模型.试验结果表明,泥石流运动具有显著的阵流特性,阵流间隔时间为10s左右,其间嵌套2~3次弱阵现象;阵流期间,泥石流流速和冲击力均较大;从流通区的源头至沟口,流速呈现非线性增大趋势,且泥石流体中固液两相流速变化趋势相似,弯道处泥石流超高现象显著;泥石流运动初期由于泥石流体中固相和液相混和搅拌不均匀而呈现稀性泥石流特征,随后粘性特性增强.这些现象与现场观测结果基本一致.     

基于震后低压变化的供水管网功能可靠度分析

供水管网的抗震功能是指供水管网在地震作用下能够满足震后城市特定用水需要(需水量和水压)的能力。地震发生后,供水管网一般处于低压供水状态,使得管网中部分用户的水压和水量不能得到全部满足,导致管网部分节点的实际配水量小于需水量。为此,在传统的管网水力分析基础上考虑节点流量随节点水压的动态变化,通过求解非线性水力方程组,得到管网节点实际流量和水压;同时,借鉴结构可靠度分析方法,引入供水管网系统随机水力模型,给出了震后供水管网功能可靠度分析的一次二阶矩方法。以一实际管网为例,演示了震后低压供水时管网功能可靠度分析的应用方法。     

Which compounds contribute most to elevated airborne exposure and corresponding health risks in the Western Balkans?

A majority of ongoing monitoring of persistent organic pollutants (POPs) is currently focused on chemicals emphasized in the Stockholm Convention. Quantitative detection of other substances (especially those with numerous anthropogenic sources such as polyaromatic hydrocarbons (PAHs)) is, however, also needed since their concentrations are usually several orders of magnitude higher. A goal of this study was to determine how various groups of compounds contribute to total human health risks at the variety of sampling sites in the region of Western Balkan. Distribution of the risks between the gas and particulate phases was also addressed. Results showed that inhalation exposure to organochlorine pesticides (OCPs) does not represent a significant risk to humans, while polychlorinated biphenyls (PCBs) re-volatilized to the atmosphere from contaminated soils and buildings can pose a problem. PCB evaporation from primary sources (currently used PCB-filled transformers or non-adequate storage facilities) generally resulted in much higher atmospheric concentrations than evaporation from the secondary sources (soils at the sites of war destructions). A majority of the human health risks at the urban sites were associated with PAHs. Between 83 and 94% of the cumulative risk at such sites was assigned to chemicals sorbed to particles, and out of it, PAHs were responsible for 99%.     

Deposition rates of unattached and attached radon progeny in room with turbulent airflow and ventilation

In this paper deposition rate coefficients for unattached and attached radon progeny were estimated according to a particle deposition model for turbulent indoor airflow described by Zhao and Wu [2006. Modeling particle deposition from fully developed turbulent flow in ventilation duct. Atmos. Environ. 40, 457–466]. The parameter which characterizes turbulent indoor airflow in this model is friction velocity, u*. Indoor ventilation changes indoor airflow and friction velocity and influences deposition rate coefficients. Correlation between deposition and ventilation rate coefficients in the room was determined. It was shown that deposition rate coefficient increases with ventilation rate coefficient and that these parameters of the Jacobi room model cannot be assumed to be independent. The values of deposition rate coefficients were presented as functions of friction velocity and ventilation rate coefficient. If ventilation rate coefficient varies from 0.1 up to 1 h⁻¹, deposition rate coefficients for unattached and attached fractions were estimated to be in the range 3–110 h⁻¹ and 0.015–0.35 h⁻¹, respectively.