电除尘器船型灰斗内部粉尘在停机后的温度研究

本文以土耳其SILOPI 2#机电除尘器为工程分析对象,对燃煤电厂电除尘器船型灰斗内的粉尘在停机后的温度变化情况进行分析计算和有限元模拟,通过粉尘随时间的温度变化数据判断粉尘的凝结情况,得出该项目在最低气温-9.3℃环境下,119小时内船型灰斗不会因粉尘凝结而发生严重堵塞情况,模拟结果与实际一致。本文为工程上电除尘器因故停机的检修提供时间参考。     

AERMOD与估算模式在环境影响评价中的应用与比较

采用AERMOD和估算模式两种预测模式对同一生活垃圾填埋场进行了预测。比较两种预测结果可以看出,在污染源、预测范围、运行周期相同的情况下,敏感点处的落地浓度均与排放源强呈正比,与距离呈反比。预测结果同时说明,估算模式是一种保守的预测模式,其预测结果比AERMOD模式大,可作为进一步预测模式的有效补充。     

水质分析中仪器法的检出限的计算

本文简单论述了几种常见的检出限计算方法,通过吹扫捕集一气质联用法测定水中六氯丁二烯的实验获得数据,并按照不同的计算方式计算检出限,期望寻找出一种满足仪器法进行水质分析要求的计算检出限的方法。     

Prediction of vortex height from mechanical mixing in metal matrix nanocomposite processing by means of dimensional analysis and scaling

Mechanical mixing can be used for initial dispersion and distribution of nanoparticle agglomerates in metal matrix nanocomposite (MMNC) fabrication. As vortex height increases, flow is enhanced as well as the risk of oxidate melt contamination. The goal of this study was to examine and predict vortex height using dimensional analysis while varying fluid and the angular speed of a pitched square-blade impeller. An equation proposed by Markopoulos et al. was verified for the present experimental conditions. The relevant dimensionless numbers were the Reynolds (Re), Froude (Fr) and Galilei (Ga) numbers. A modified Fr was defined (Fr*) including the shaft and blade angles of the impeller. Experiments allowed calculation of the dimensionless numbers. Two fluids, water and 50 vol% aqueous glycerine, were used. Angular clockwise speed varied from 200 to 900 rpm in 100 rpm increments. Vortex height was measured in lateral view digital images. Correlations of the dimensionless numbers yielded, first, a linear relationship of the product of dimensionless vortex height (H) and specific gravity (ρ*) with respect to Fr*. A polynomial relationship was found between H and ReFr* for each fluid. The polynomial coefficients, in turn, follow a power law behavior with respect to Ga. This allows a prediction of vortex height in other Newtonian fluids that satisfy the single-phase isothermal flow condition. Perhaps, molten aluminum used in MMNC fabrication, can be analyzed based on a simple, room temperature, low cost transparent fluid system. For the experimental conditions in this study, the equation proposed by Markopoulos et al. was valid. The predicting methodology was verified with experimental results using 25 vol% aqueous glycerine, resulting in an absolute percent error of 5.29%, comparable and lower than an error of 9.12% obtained by predicting vortex height with Markopoulos’ equation.     

丹东生态环境监测业务系统设计与实现

丹东生态环境监测业务系统是用于生态环境监测日常业务观测,编制各类观测报文及数据上网传输的实用型业务系统。系统采取多窗157结构框架,合理布局功能窗口界面,兼容了地面气象观测数据文件格式,统一数据检查标准,观测数据处理更为准确有效。并以VB6．0可视化语言为开发工具适应不用版本Windows操作系统。基于生态环境监测数据统计、数据分析和数据发布为一体的多功能业务应用软件。     

河源市企业环境事故应急预案的评估与管理现状分析

结合应急预案编制相关要求及评估工作实际,分析了我市企业环境事故应急预案评估、备案及管理工作中存在的问题,并提出了建议和措施,以期为企业应急预案的评估和管理工作提供参考。     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

储油罐区防火堤受力情况分析

利用ANSYS有限元分析软件,对防火堤受液态物质冲击时受力状况进行模拟,并对防火堤在冲击载荷下的受力情况进行了分析,指出防火堤在事故状态下的脆弱部分,对油库的安全设计、评价和日常维护具有参考价值。     

油田联合站安全性评价模式研究

针对联合站生产过程复杂、安全影响因素多的特点,提出了二级模糊综合安全评价方法。以港东联合站的实际情况为基础,在系统分析联合站危险因素的基础上,选取储罐、管道、监控系统、其他系统4个因素作为联合站安全评价的主要关联因子,构建了针对港东联合站安全的二级综合模糊评估模型。运用层次分析法确定不同层次和因素的重要度,以加权法为运算准则,确定了联合站的安全等级。评估结果表明:该二级模糊综合评价方法提高了联合站安全现状评价的客观性,评估过程易于实现,评价结果更加客观、合理。     

基于Tripod Beta事故模型的触电事故原因分析

应用Tripod Beta事故模型对某厂触电事故进行了深入分析,得到了事故原因,并提出预防类似事故的建议措施。