自上而下的城市能源消耗碳排放估算方法

快速的城镇化进程带来城市碳排放的快速增长,准确的城市水平碳排放数据对于制定科学合理的碳减排政策极为关键,明确碳排放源的关键类别可以做到有的放矢和精准管控.但是目前中国碳排放数据的研究主要集中在国家、地区和省级层面,城市水平由于所需基础数据的不透明和不准确,长久以来缺乏完整的碳排放清单.为解决该问题,在以前相关研究的基础上,通过省级能源平衡表,尝试利用合理的分配指标从省级碳排放数据估算出下属城市的碳排放,构建了一套自上而下的城市能源消耗碳排放估算方法.通过与现有可获得的城市水平数据进行对比,发现估算差距均在10%以内,证明了该方法的可行性和准确性,并尝试在时间尺度进行了扩展.为获取在时间和空间上均连续的中国城市能源消耗碳排放数据提供了科学的方法和合理的思路,也能为各城市分配减排任务和城市间进行减排协商提供可靠的数据支撑.     

溶解性微生物产物在GO/PVDF杂化膜面的污染行为

为了解析溶解性微生物产物（SMP）在GO/PVDF杂化膜面的污染特性,对膜片进行了宏观污染实验,并采用耗散石英微晶天平（QCM-D）从微观角度分析了SMP在自制镀膜芯片上的吸附规律和污染层结构变化.结果表明,GO含量为0.5wt%的膜污染恢复率最高（79.95%）,抗污染能力最强.QCM-D实验发现,GO含量为0wt%镀膜芯片表面SMP吸附量最大,污染较为严重.膜片亲水性越强,吸附频率变化越小,抗污染能力越强.此外,GO含量为0.5wt%镀膜芯片表面的污染物结构比较疏松和柔软,其他膜表面的污染物结构较为坚硬和致密.     

迁安市污水收集与处理效能定量评估

污水收集与处理效能直接影响合流制排水体制下的水安全和水环境,是海绵城市建设中需要解析评估的重要内容.以迁安市为例,建立覆盖"污染源—管网关键节点—污水处理厂"的监测网络,基于同步水量、水质监测结果,定量解析生活污水污染物排放系数和污水处理系统收集与处理效能,并定位问题管段具体位置和主要问题.结果表明:①合流制小区CODCr、NH3-N排放系数分别为43. 4、13. 3 g(人·d),分流制小区CODCr、NH3-N排放系数略高,分别为53. 1、14. 5 g(人·d).②受地下水、河水入渗的双重影响,生活污水从进入市政管网后污染物质量浓度大幅下降,保守估计下入渗率约为32. 5%,合流制管网截污干管至污水处理厂地下水、河水入渗量达到了14 471 m3d,分流制干管至污水处理厂地下水入渗量约为19 777 m3d.③污水处理厂进水水质指标均远小于设计进水水质,还存在C源不足、一部分比例的污水可生化性较差的特征,进水BOD5TN〔ρ(BOD5)ρ(TN)〕变化范围为0. 47～4. 32,平均值仅为1. 68.研究显示,地下水河水入渗严重降低污水收集处理效能,建议海绵城市建设中重视对于污水收集处理效能的摸底评估,并从污水处理系统设计和管网缺陷修复上大力整改.     

洛阳市大气细颗粒物化学组分特征及溯源分析

为研究洛阳市大气细颗粒物(PM2.5)的化学组分及来源的时空分布特征,对汾渭平原地区较为欠缺的PM2.5相关研究进行补充,在2018年4月至2019年1月在洛阳市高新和林校2个点位进行了样品采集,对P(PM2.5)、化学组分(水溶性离子、碳质组分、元素)和来源进行分析.2个点位的年均ρ(PM2.5)分别为(76.6±37.9)μg-m-3和(83.2±38.9)μg·m-3,季节变化由高到低均为:冬季、春季、秋季和夏季.高新和林校的9种水溶性离子浓度分别占PM2.5的 55.1％和54.2％,林校的二次离子(NO3-、SO42-和NH4+)年均浓度之和高于高新.高新和林校的ρ[有机碳(OC)]、P[元素碳(EC)]分别为(12.4±7.7)μg·m-3、(1.2±0.5)μg·m-3和(13.4±7.7)μg·m-3、(1.3±0.5)μg·m-3,林校的含碳组分在各季节均高于高新;高新和林校冬季的二次有机碳(SOC)在OC中质量分数分别为67.8％和77.3％,远高于其他季节.化学质量平衡结果表明,高新和林校的主要贡献源均为二次硝酸盐(26.9％和27.1％)、二次硫酸盐(14.5％和14.8％)、燃煤(12.6％和11.6％)、SOA(10.8％和12.2％),高新的生物质源贡献较高,而林校的扬尘源和机动车源贡献较高.后向轨迹和潜在源贡献因子分析表明,洛阳市春季不仅受到来自西北方向的传输,来自西南地区的污染传输也不能忽略;夏季既受到正东方向的季风影响,又有来自正南方向的潜在污染;秋季污染物主要来自东南方向,同时也存在西北方向的潜在来源;冬季受到的传输影响则主要来自周边区域,污染来源较为集中.     

沙层水分小尺度地域分异特征 —— 以沙坡头沙区为例

水分是沙漠地区生态环境的限制因子,研究沙漠沙层水分分布规律对在沙区种植人工植物进行固沙有显著指导意义。通过对沙坡头沙区两个典型流动沙丘不同坡向、不同部位以及两个洼地进行采样,研究该区水分平衡与小尺度水分分异特征与规律,结果表明：（1）流动大沙丘顶部沙层水分含量一般在1.00%以下,中部水分含量一般在1.00%—2.00%,底部水分含量一般在2.00%—3.00%,均以薄膜水形式存在。洼地沙层2.0—3.0 m左右深度有饱和重力水甚至地下水出现。（2）流动大沙丘的迎风坡沙层水分高于背风坡,沙丘水分含量均是底部最高,中部次之,顶部最低。（3）沙坡头区沙层水分属于快速入渗型水分正平衡,洼地或平坦地段是大气降水向下入渗的主要渠道。     

Elements of Carbon Balance in Oligotrophic Bogs

Elements of carbon balance of oligotrophic bogs were studied using an example of the landscape profile of the Klyuch River in 1998–2000. Carbon balance was preliminarily calculated taking into account the biological productivity, release of carbon dioxide and methane, and carbon outflow with bog waters. Based on the data obtained on the carbon inflow and outflow, the conclusion was made concerning the progressive peat formation in the region studied.     

县域耕地总量动态平衡规划模式的构建－－以江苏省启东市为例

本文在界定耕地总量动态平衡是由耕地数量、耕地质量和耕地生态环境三者组成的整体平衡的基础之上 ,对耕地总量的评价方法进行了初步研究 ,并以启东市为例 ,构建了耕地生产力总量动态平衡规划模式。     

Novel Biocomposites Sheet Molding Compounds for Low Cost Housing Panel Applications

Biocomposites were made by a novel high volume processing technique named biocomposite sheet molding compound panel (BCSMCP) manufacturing process. This process design was inspired by the commercial glass fiber–polyester resin composite fabrication method called sheet molding compounding (SMC). This process yields continuous production of biocomposites on a large scale, and thus can be easily adopted in industries. A unique fiber dispersion method, which enabled uniform distribution of natural fibers, was used in this process. Consistency of the process was tested by evaluating the repeatability of the resultant materials mechanical properties. The low cost biocomposites produced as a result of the processing will be used for various panel applications such as housing and transportation. The molded samples were tested for various mechanical and thermal properties, in accordance with ASTM procedures. The biocomposites were made with various natural fibers including, big blue stem grass, jute, and industrial hemp. By combining different natural fibers in varying mass fractions, hybrid biocomposites were made using this process. Grass fiber reinforced polyester biocomposites processed by the SMC line showed very promising results.     

锅炉蒸汽过热器爆管原因分析及整改措施

针对锅炉过热器管在运行中常见的过热爆管问题 ,从原理及运行工况的角度进行分析 ,并提出了有效的隐患整改措施 ,保证了锅炉的正常运行。     

An experimental study on the burning rate of a continuously released n-heptane spill fire on an open water surface

Spill fires are common during oil product storage and transportation after a loss of containment. Since the burning fuel is moving and the fuel depth is quite shallow, the burning rate in a spill fire is different from that of a pool fire with a static burning zone. Unlike pool fires, which have been studied for decades and have well-established correlations for burning rate, research on spill fires is inadequate. In this paper, continuously released n-heptane spill fire experiments were conducted on open water surfaces with varying fuel discharge rates. The pool diameters were measured, and the spill fire burning rates were estimated based on a dynamic balance between fuel supply and combustion. The burning rates in n-heptane pool fires from the literature were reviewed and compared with the estimated burning rates in spill fires of the same dimension. The spill fire burning rate was found to be close to that in a pool fire during the initial burning phase but lower than that in a bulk burning pool fire and that in a “fuel-level-controlled” pool fire. The distinction between the burning rates of spill fires and pool fires is explained by the heat balance analysis of the fuel layer. A model for the spill fire burning rate was proposed accordingly. The results calculated with the presented model are closer to the measured data than those calculated with pool fire models.