Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

Effect of placement angles on wireless electrocoagulation for bipolar aluminum electrodes

A new electrocoagulation process based on bipolar aluminum electrode is proposed. The placement angles of bipolar electrode are key parameter. The numerical simulations support the experimental results. We in our previous study reported the wireless electrocoagulation (WEC) based on bipolar electrochemistry for water purification. One of the most important advantages of WEC is the omission of ohmic connection between bipolar electrode (BPE) and power supply, and thus the electrochemical reactions on BPE are driven by electric field in solution induced by driving electrodes. In this study, the impact of placement angle of bipolar aluminum electrode on WEC was investigated to provide a detailed analysis on the correlations between the bipolar electrode placement angle and bipolar electrocoagulation reactions. The results showed that the WEC cell with a horizontal BPE placed at 0° produced the maximum dissolved aluminum coagulant, accounting for 71.6 % higher than that with a vertical one placed at 90°. Moreover, the finite element simulations of current and potential distribution were carried out along the surface of BPE at different placement angles, revealing the mechanism of different BPE placement angles on aluminum dissolution rates in WEC system.     

宝钢中厚板分公司煤干燥机除尘系统风量调整技术探究

文章针对宝钢股份中厚板分公司炼铁厂煤干燥机除尘系统吸尘点冒灰,粉尘无组织排放超标的现象进行了测试分析,数据表明主要由除尘系统风量匹配不佳、吸尘点风量不合理造成。笔者通过不断调整阀门及风机档板开摩,测试调整后的风量、除尘性能、岗位粉尘浓度等参数,确定了一个合理的系统风量,不仅可以达到环境排放及职业卫生的要求,而且充分挖掘了除尘系统潜力,达到了节能降耗、经济运行的目的,同时对类似除尘系统风量匹配不佳、扬尘等问题也形成了有效的解决方案。     

倾角和循环流量对平板型光催化反应器性能的影响

考察了平板倾角和循环流量对平板反应器流动特性和性能的影响 ,并讨论了以太阳光为辐射光源时平板型反应器的最佳倾角问题 .研究表明 ,平板上液体体积 (V)和水膜厚度 (b)与倾角 (β)、循环流量 (Q)分别存在定量关系 .入射辐射条件相同时 ,在悬浮催化剂体系中 ,平板倾角越小 ,循环流量越大 ,反应器性能越高 ;在固定催化剂体系中 ,平板反应器 (长 1m,宽 0.48m)的性能最佳时的循环流量为 500L/h、倾角为 10°,相应雷诺数为 286.无论在悬浮催化剂还是固定催化剂体系中 ,周期性地辐射能提高反应速率 .     

青岛市主干道沿线高层建筑的交通噪声研究

采用A计权网络对青岛市东西快速路沿线高层建筑进行监测。利用Grapher软件,以Leq为监测值的基准值绘制连续线状图,分析城市主干道周边高层建筑上交通噪声的峰值点。根据道路中心线到高层建筑的距离信息,得出高层建筑交通噪声峰值点与道路中心线的连线与水平地面间的角度约为30°。     

A path analysis model for explaining unsafe behavior in workplaces: the effect of perceived work pressure

Background. Unsafe behavior is closely related to occupational accidents. Work pressure is one the main factors affecting employees’ behavior. The aim of the present study was to provide a path analysis model for explaining how work pressure affects safety behavior. Methods. Using a self-administered questionnaire, six variables supposed to affect safety employees’ behavior were measured. The path analysis model was constructed based on several hypotheses. The goodness of fit of the model was assessed using both absolute and comparative fit indices. Results. Work pressure was determined not to influence safety behavior directly. However, it negatively influenced other variables. Group attitude and personal attitude toward safety were the main factors mediating the effect of work pressure on safety behavior. Among the variables investigated in the present study, group attitude, personal attitude and work pressure had the strongest effects on safety behavior. Conclusion. Managers should consider that in order to improve employees’ safety behavior, work pressure should be reduced to a reasonable level, and concurrently a supportive environment, which ensures a positive group attitude toward safety, should be provided. Replication of the study is recommended.     

大半径浅圆弧的切削加工及误差分析

在机械加工中采用近似法加工空间曲面,常常使加工过程变得简单可行,而且解决了部分机床力不能及的矛盾.在此介绍了在普通铣床上用椭圆曲线网络加工大半径浅圆弧的加工原理、加工方法及其误差分析.     

上悬窗条件下通风控制腔室火灾温度的实验研究

随着建筑结构的发展,上悬窗日益成为城市建筑窗户的选择,但这种通风条件下腔室火灾的发展特性仍缺乏研究.利用1:8相似比例的缩尺寸腔室火灾实验台,实验研究了上悬窗不同开口尺寸、不同开窗角度下,通风控制的腔室火灾温度发展特性.实验结果表明,通风控制条件下,腔室火灾温度随着上悬窗开口尺寸和开窗角度的增加而增加,并通过能量平衡分...     

Protective Progressives to Distrustful Traditionalists: A Post Hoc Segmentation Method for Science Communication

ABSTRACT

This study demonstrates a post-hoc segmentation that is effective in creating distinct and robust segments of interest for researchers and practitioners in science communication. We use agglomerative hierarchical clustering to classify survey respondents based on answers to a short, five-item battery of questions drawn from variables that are frequently used in science communication. Resulting segments demonstrate strong differences in regards to demographics, issue-specific science knowledge, attention to media, sentiment toward media, and social networking site use. We assess the utility of the segments through a series of regression analyses in order to determine differences among segments with regards to intent to seek information about three science issues: fracking, nanotechnology, and synthetic biology.