氧化铝赤泥堆场渗滤液污染的评价与防治

提出了氧化铝生产赤泥堆场的环境影响评价构架及生产阶段尽量减少下渗量的措施，有效地保护堆场区域地下水水环境。     

Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

钻井环境污染源头控制技术综述

通过对国内外石油行业的钻井环境污染源头控制技术的简单综述,分析了钻井工艺可采用小孔径钻井、连续软管工艺、新型固控设施等的技术特点,对选择合适的钻井液以及应用环保型钻井液来减轻污染方面进行了探讨。并展望了我国石油行业钻井环境污染源头控制技术的发展。     

污泥掺烧技术在煤粉炉上应用的试验研究

通过污泥掺烧技术在煤粉炉上的应用试验,得出污泥的含水率对锅炉制粉系统的影响.掺烧前后对炉膛温度没有大的影响,随着污泥比例的增加,燃烧效率下降,烟尘浓度和SO2浓度降低.     

三相生物流化床处理低C/N污水的亚硝化过程控制研究

将短程硝化与生物流化床相结合,采用低碳氮比的人工合成污水进行启动,考察进水COD、氨氮、DO、p H对硝化和亚硝化过程的影响。研究表明,较短的水力停留时间(HRT)和较少的接种污泥量有利于生物膜的生长,能够成功实现生物流化床的快速启动。高进水氨氮浓度有助于反应器实现亚硝酸盐的积累,但是这种积累并不稳定。当反应器中p H为7.5~8.1,ρ(DO)为1.5~2.5 mg/L时,最大亚硝化率达到75%左右,氨氮去除率达85%以上。出水NO-2-N和NO-3-N浓度随进水COD浓度的增加而减少;当进水COD浓度为50 mg/L时,出水硝酸盐浓度急剧减少,亚硝酸盐浓度有所降低,反应器发生同步硝化反硝化脱氮现象。     

用碳化法从制碱废渣一次盐泥中制取轻质氧化镁的研究

本研究是用制碱废渣一次盐泥作原料，采用二氧化碳碳化法制取轻质氧化镁。同时分析了提取轻质氧化镁后的残渣用于制造水泥或其它胶凝材料的原料的可行性。     

An Experimental Study on the Treating River Sewage with New Bioreactor

A new bioreactor on the basis of a dynamic fluidized bed was designed, which combines advantages of the fluidized bed and a biological contactor. The experiments of start up, normal operation and parameter adjustment are carried out. The results show that the bioreactor can be quickly started up in the condition that the fill is 50%, the hydraulic retention time is 72 min, aerate speed is 2.5 m3/h, rotation-cage rotated speed is 1.5 r/min, and the removal rates of chemical oxygen demand （CODcr） and Ammonia nitrogen （NH3-N） are 75.34% and 80.98% respectively. The influence of the operation parameter on removal rates of the bioreactor is analyzed, and an appropriate operation parameter is provided.     

“固化赤泥-人工膜”复合防渗材料研究

赤泥本身具有良好的防渗性能,加入石灰作为激发剂,更可提高其防渗性。根据《土工合成材料测试手册》和GB/T 50123—1999《土工试验方法标准》进行渗透试验,结果表明:室内试验在赤泥中加入8%石灰,并夹一层人工防渗膜形成的复合防渗材料,在固化28 d后,其渗透系数可达(7.3～7.4)×10-9 cm/s。在工业试验中,夹入不同厚度和质地的人工防渗膜的石灰(8%)固化赤泥,渗透系数可达到6.32×10-9～1.89×10-7 cm/s。研究成果在中原某铝厂赤泥堆场防渗工程中得到了应用。     

Fe-NaA分子筛膜的制备及催化湿式H2O2氧化甲基橙溶液

采用湿法造纸、二次生长和湿法浸渍法合成了一种新型微纤复合Fe-NaA分子筛膜催化剂,并将其用于催化湿式H_2O_2氧化甲基橙溶液.首先通过湿法造纸和烧结工艺制备纸状烧结不锈钢微纤(PSSF)载体,然后采用二次生长法在PSSF上合成NaA分子筛膜,最后以九水硝酸铁(Fe(NO_3)_3·9H_2O)和微纤复合NaA分子筛膜为原料,利用湿法浸渍法制备微纤复合Fe-NaA分子筛膜催化剂.考察了连续固定床反应器中温度、床层高度、进料液流量和甲基橙入口浓度对甲基橙降解性能的影响,并测定了催化剂重复使用3次后的稳定性.结果表明,随温度及床层高度增加,甲基橙转化率先增加然后趋于稳定;随进料液流量增加,甲基橙转化率均大于95%,但COD脱除率略有降低,当流量分别为2、3和4 mL·min~(-1),固定床连续运转5 h时COD脱除率分别为81.9%、76.4%和69.8%;随甲基橙入口浓度增加,其转化率变化幅度很小.在pH=2、催化剂床层高度2.0 cm、温度70℃、进料液流量4 mL·min~(-1)、甲基橙浓度50～200 mg·L~(-1)、固定床连续运转5 h的条件下,甲基橙转化率超过96%,COD转化率大于67%,铁浸出浓度低于4 mg·L~(-1).催化剂被重复使用3次后,甲基橙转化率基本保持不变.