表面过滤技术在焚烧厂烟气脱酸净化中的作用

随着城市垃圾焚烧工程的发展，国家对焚烧后尾气的处理技术提出了越来越高的要求。基于“表面过滤”理论的Gore过滤技术，不但为粉尘排放达到欧洲标准提供了技术保障，而且为脱酸／硫的后续反应提供了反应界面，在实际应用中可以有效节约反应剂。     

近场地震作用下框架结构的损伤机理

首先讨论了近场地面运动的特征及各种抗震规范对近场地震的设防，然后采用非线性时程分析方法，对一个10层框架结构在近场地震作用下的响应特性进行了研究。同时对该框架结构进行了Pushover分析，通过与非线性时程分析结果进行对比，说明Pushover分析方法不能正确评估结构在近场地震作用下的抗震性能。     

Manufacture of strand board made from construction scrap wood

The objective of this research was to evaluate the physical and mechanical properties of strand board made from construction scrap wood. The strand board was manufactured using Sugi (Cryptomeria japonica D. Don) and Douglas-fir (Pseudotsuga japonica) strands selected from construction scrap wood. The strands were oriented, and three-layer (face/core/face) strand board of three types was produced: one in which the strands of the face layer were oriented at a right angle to those of the core layer (R board), another in which the strands of the face layer were oriented parallel to those of the core layer (P board), and a third in which the strands of both layers were oriented at random (Ra board). The physical and mechanical properties of the boards were evaluated based on Japanese Industrial Standard (JIS). The main results obtained are as follows: the bending strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard of JIS A 5908. The bending strength of the strand board was affected by board density, strand orientation and resin content, and became larger with increased density as well as resin content. That of the parallel specimen of P board was the largest among the specimen-orientations and types. The internal bond strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard and type 24-10 particleboard of JIS A 5908. The internal bond strength was markedly affected by the resin content of the core layer, and became larger with increased density. The thickness swelling of the strand board decreased with increased resin content, and become larger with increased density.     

内排压脚与边坡稳定性的关系

为了研究边坡角及边坡形状与边坡稳定性的关系,采用有限元软件ANSYS模拟了不同边坡角对应的稳定系数,以及不同平盘宽度和压脚高度所形成的等储备强度边坡的稳定系数。模拟中假设材料符合相关联的理想弹塑性本构关系,强度准则符合Drucker-Prager准则,用计算收敛性作为边坡稳定性的准则,用强度折减法得出边坡的稳定系数。为了形成等储备强度边坡,由下到上分步骤进行压脚。先在平面边坡最下台阶压脚,这样提高了边坡稳定系数,在边坡进入临界状态时,最下两台阶的塑性状态相同,则压脚停止;再在最下两台阶同时压脚,在边坡进入临界状态时,最下3个台阶的塑性状态相同,则压脚停止;以此类推,在最下边n个台阶同时压脚,在边坡进入临界状态时,压到与第n+1个台阶的塑性状态相同为止。结果表明,边坡总是从坡脚开始形成塑性区,在重力加载过程中,塑性区以弧形条带向坡顶扩展,形成滑带。最有效的内排压脚是从最下台阶开始形成等储备强度边坡的压脚。     

2种铀矿井下常用口罩对气溶胶粒子的过滤特性研究

为探究铀矿井下常用的2种口罩对气溶胶粒子的过滤特性,在我国南方某铀矿山,利用APS3321型空气动力学粒径谱仪对井下工作人员常用纱布口罩和KN95型口罩的过滤特性进行了研究.井下气溶胶监测数据显示,该铀矿井下典型作业场所PM10的质量浓度介于0.069～ 9.800 mg/m3,个数浓度介于173.918 ～2 561.600个/cm3;PM2.5的质量浓度介于0.039～0.479 mg/m3之间,个数浓度介于173.100～2 556.382个/cm3之间.口罩过滤特性试验结果表明:1)KN95型口罩和纱布口罩对PM10的平均过滤效率分别为95％和76％,对PM2.5的平均过滤效率分别为93％和61％,可见KN95型口罩过滤效率明显高于纱布口罩;2)在0.5～3.5 μm粒径范围内,2种口罩对颗粒物的过滤效率均随粒径增大而增大,在3.5～ 10μm粒径范围内,2种口罩对不同粒径颗粒物的过滤效率均接近100％;3)无论从质量浓度还是个数浓度来看,经口罩过滤后的气溶胶粒子大多数分布在2.5μm粒径范围内,表明PM2.5是主要的气溶胶污染物.     

AHP based life cycle sustainability assessment (LCSA) framework: a case study of six storey wood frame and concrete frame buildings in Vancouver

Construction and building industry is in dire need for developing sustainability assessment frameworks that can evaluate and integrate related environmental and socioeconomic impacts. This paper discusses an analytic hierarchy process (AHP) based sustainability evaluation framework for mid-rise residential buildings based on a broad range of environmental and socioeconomic criteria. A cradle to grave life cycle assessment technique was applied to identify, classify, and assess triple bottom line (TBL) sustainability performance indicators of buildings. Then, the AHP was applied to aggregate the impacts into a unified sustainability index. The framework is demonstrated through a case study to investigate two six storey structural systems (i.e. concrete and wood) in Vancouver, Canada. The results of this paper show that the environmental performance of a building in Canada, even in regions with milder weather such as Vancouver, is highly dependent on service life energy, rather than structural materials.     

氧化硫硫杆菌固定化菌球制备及其耦合填料去除H2S

以海藻酸钠(SA)为包埋载体,对氧化硫硫杆菌(Acidithiobacillus thiooxidans)进行固定化制备菌球,优化菌球制备条件,在生物滤塔内验证其对H₂S的去除能力.以前期驯化获得的富含硫系恶臭降解微生物菌群的污泥为菌源进行生物滤塔填料筛选,耦合A.thiooxidans菌球和填料进行生物除臭.结果表明,优选的固定化条件为:SA浓度3.0%､吸附剂CNT､A.thiooxidans菌悬液与混合液比例20%､CaCl₂浓度4.0%､改性剂己二胺溶液,获得的菌球机械强度､传质性能､硫氧化能力最好.将A.thiooxidans菌球填装于生物滤塔,H₂S最大去除率和去除能力为70%和1.06g H₂S/m³·h.以混合挂膜方式进行填料挂膜后,在聚氨酯泡沫､活性碳布和陶粒中优选出最佳填料活性碳布,获得H₂S最大去除率和去除能力为88%和0.84g H₂S/m³·h.以混合填装方式将A.thiooxidans菌球与活性碳布填装于生物滤塔,获得H₂S最大去除率和去除能力为86%和1.00g H₂S/m³·h.     

印制电路板项目竣工验收监测工作探讨

以福建省莆田市为例,研究分析了印制电路板项目竣工环境保护验收监测现场踏勘中存在的问题,提出要加强对项目的现场核查,以及对环保设施建设及运行、建设内容变更、环境风险、危险废物处理等的建议与对策。     

“混凝沉淀+纳米零价铁”处理印刷电路板生产废水中试研究

提出一种新纳米零价铁反应器(Nanoscale Zero-Valent Iron Reactor,简称NIR)及"混凝沉淀+纳米零价铁"处理工艺,通过实际生产废水进行中试,考察和研究该工艺和NIR技术处理江苏省某市印刷电路板(Printed Circuit Board,简称PCB)工业园区废水的效果。结果表明,此工艺对PCB生产废水中Cu、TP及COD Cr去除率分别可达到97.3%、73.7%、26%,其中Cu处理效果最佳;XRD结果表明,纳米零价铁(Nanoscale Zero-Valent Iron,nZVI)与PCB生产废水反应后含有γ-Fe2O3、Fe3O4、γ-FeOOH、CuO、Cu2O、Cu0等产物。"混凝沉淀+纳米零价铁"工艺处理废水时具有处理效果好、工艺耐冲击性能好、产泥量小、不易造成二次污染等优点。     

Removal of famoxadone,fluquinconazole and trifloxystrobin residues in red wines: Effects of clarification and filtration processes

The effects of six clarification agents [egg albumin, blood albumin, bentonite + gelatine, charcoal, polyvinylpolypyrrolidine (PVPP) and silica gel] on the removal of residues of three fungicides (famoxadone, fluquinconazole and trifloxystrobin) applied directly to a racked red wine, elaborated from Monastrell variety grapes from the D.O. Region of Jumilla (Murcia, Spain) were studied. The clarified wines were filtered with 0.45 μ m nylon filters to determine the influence of this winemaking process in the disappearance of fungicide residues. Analytical determination of fluquinconazole and trifloxystrobin was performed by gas chromatography with electron captor detector (ECD), while that of famoxadone using an HPLC equipped with a diode array detector (DAD). Generally, trifloxystrobin is the fungicide that is the lowest persistent one in wines, except in the egg albumin study whereas, the most persistent one is fluquinconazole. The elimination depends on the nature of the active ingredient, though the water stability in the presence of light within it has more influence than the solubility and polarity of the product itself. The most effective clarifying agents were the charcoal and PVPP. The silica gel and bentonite plus gelatine were not enough to reduce considerably the residual contents in the wine clarified with them. In general terms, filtration is not an effective step in the elimination of wine residues. The greatest removal after filtration is obtained in wines clarified with egg albumine and bentonite plus gelatine, and the lowest in those clarified with PVPP.