Methanogenic activity of woody debris

The paper is devoted to the phenomenon of methanogenic activity of woody debris, i.e., methane production in the course of wood decomposition by fungi, which are not directly involved in methane synthesis but form an initial link in the trophic chain leading to methanogenic archaea. Expert evaluation of probable amounts of methane emission is made. The results show that woody debris is an important global source of this greenhouse gas.     

Study on the raw fish oil purification from PCDD/F and dl-PCB-industrial tests

The results of tests for the purification of fish oils with activated carbon for industrial use are presented. The optimum parameters for the process of purification (granulation of the activated carbon, its dosage, the oil temperature, and the duration of mixing the oil with activated carbon) were previously established for the laboratory scale. The optimization of the process consisted of selecting purification parameters that would allow for maximum reduction of the toxic polychlorinated dibenzo-para-dioxins and polychlorinated dibenzofurans (PCDD/Fs) content, while retaining the favorable high fatty acid content [C20:5 n−3, eicosapentaenoic acid (EPA) and C22:6 n−3, docosahexaenoic acid (DHA)]. The use of that optimum parameters in industrial conditions confirmed the satisfactory results obtained in laboratory tests. Five types of oil derived from various Baltic fish were purified. Reduction in the PCDD/Fs content was 77.0–93.6% on average, whereas in the dioxin-like polychlorinated biphenyls (dl-PCBs)—it was 42.7–50.5% on average, with insignificant changes in the total amount of EPA and DHA content. Furthermore, a significant reduction in the content of arsenic was noted (by about 62% on average), with insignificant changes in the content of organochlorine pesticides (OCPs), and marker polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), cadmium, lead, and mercury.Purification provided fish oil having standardized parameters that allow for its use as feed additives, whilst retaining its favorable fatty acid content.     

Degassing of H/He, CFCs and SF6 by denitrification: Measurements and two-phase transport simulations

The production of N₂ gas by denitrification may lead to the appearance of a gas phase below the water table prohibiting the conservative transport of tracer gases required for groundwater dating. We used a two-phase flow and transport model (STOMP) to study the reliability of ³H/³He, CFCs and SF₆ as groundwater age tracers under agricultural land where denitrification causes degassing. We were able to reproduce the amount of degassing (R² = 69%), as well as the ³H (R² = 79%) and ³He (R² = 76%) concentrations observed in a ³H/³He data set using simple 2D models. We found that the TDG correction of the ³H/³He age overestimated the control ³He/³He age by 2.1 years, due to the accumulation of ³He in the gas phase. The total uncertainty of degassed ³H/³He ages of 6 years (± 2 σ) is due to the correction of degassed ³He using the TDG method, but also due to the travel time in the unsaturated zone and the diffusion of bomb peak ³He. CFCs appear to be subject to significant degradation in anoxic groundwater and SF₆ is highly susceptible to degassing. We conclude that ³H/³He is the most reliable method to date degassed groundwater and that two-phase flow models such as STOMP are useful tools to assist in the interpretation of degassed groundwater age tracer data.     

Comparison of manufactured and black carbon nanoparticle concentrations in aquatic sediments

In this paper, we show that concentrations of manufactured carbon-based nanoparticles (MCNPs) in aquatic sediments will be negligible compared to levels of black carbon nanoparticles (BCNPs). This is concluded from model calculations accounting for MCNP sedimentation fluxes, removal rates due to aggregation or degradation, and MCNP burial in deeper sediment layers. The resultant steady state MCNP levels are compared with BCNP levels calculated from soot levels in sediments and weight fractions of nanosized fractions of these soot particles. MCNP/BCNP ratios range from 10⁻⁷ to 10⁻⁴ (w:w). This suggests that the often acclaimed effect of MCNPs on organic pollutant binding and bioavailability will likely be below the level of detection if natural BCNPs are present, even if binding to MCNP is one to two orders of magnitude stronger than to BCNPs. Furthermore, exposure and toxic effects of MCNPs in sediments and soils will be negligible compared to that of BCNPs.     

活性炭在膜生物反应器中的应用研究进展

活性炭是一种非常优良的吸附剂,具有物理吸附和化学吸附的双重特性。本文介绍了近年来向膜生物反应器中投加活性炭的应用研究进展,表明投加活性炭可以提高膜生物反应器的处理效果,同时对改善膜污染有很好的效果。     

Ru/γ-Al_2O_3和Ru/AC催化剂的制备及其对氨氧化反应的催化性能

分别以γ-Al_2O_3和活性炭(AC)为载体,采用浸渍法制备了Ru质量分数均为2.0%的Ru/γ-Al_2O_3和Ru/AC催化剂,并用X射线衍射仪和透射电子显微镜等方法对催化剂结构进行了表征.实验结果表明:Ru/AC中Ru沉积在AC表面,分散度较低;而Ru/γ-Al_2O_3中Ru进入到γ-Al_2O_3内部,形成了一种高度分散体系.Ru/γ-Al_2O_3对氨的催化活性高于Ru/AC,氨在Ru/γ-Al_2O_3和Ru/AC上的起活温度分别为200 ℃和266 ℃,T_(90)(氨去除率达90%时的反应温度)分别为267℃和320 ℃.随混合气体空速增大,Ru/γ-Al_2O_3催化剂的T_(90)逐渐升高,气体空速分别为3 600,4 800,5 400 h~(-1)时,T_(90)分别为235,266,303 ℃.随反应前混合气体中氨质量分数增加,氨的去除率降低.     

论构建中国用能权交易体系的制度衔接之维

用能权是具有公私法双重属性的管制性财产权。用能权交易是我国推进绿色发展的一项制度创新,对实现能耗总量和强度"双控"目标具有重要意义。用能权交易制度旨在从供给侧实现节能降耗目标,与其并行的节能减排市场化机制还包括节能量交易和碳排放权交易。节能量交易与用能权交易的规制对象、规制手段、制度设计目的和约束功能相近,故两者存在制度重复建设问题。用能权交易和碳排放权交易的制度设计目的具有协同性、规制对象有交叉,但两者在用能权指标和碳排放配额初始分配、履约等方面存在制度衔接不畅问题。通过法学和制度经济学分析,对用能权交易、节能量交易和碳排放权交易的制度整合与重构提出了建议。中国应当取消目标节能量交易制度,并以核定用能权交易取代项目节能量交易。用能权交易和碳排放权交易的制度衔接层面,应当打通用能权交易体系和碳排放权交易体系,建立联合履约机制,即允许用能单位或排放单位在满足一定条件的情况下使用用能权指标、核定用能权、碳排放配额或核证减排量履约。用能权指标与碳排放配额在履约方面的衔接机制重点在于一级市场的对接。用能权的初始分配仅仅是为重点用能单位设定节能义务的过程,应当以公平为原则,并且采取免费分配的方式。相对于用能权交易制度,碳排放权交易制度则是为了控制排放单位对碳排放空间这一资源的过度利用。因此,在碳排放配额初始分配环节,政府应当通过有偿分配的方式以实现国家对碳排放空间这一稀缺资源的所有者权益。建立核定用能权和核证减排量的联合履约机制,既允许用能单位购买核证减排量抵消其超额耗能,也允许排放单位购买核定用能权以抵消其超额排放,并对抵消比例设定限制。     

中国碳排放强度的时空演进及跃迁机制

面对气候变化所带来的生存危机以及环境治理的复杂状况,对中国碳排放强度时空演进的动态监测与预警治理的研究是实现碳排放强度下降目标的关键。文章测算1997—2015年中国大陆30个省区碳排放强度的空间面板数据,采用探索性时空数据分析(ESTDA)方法对中国碳排放强度的空间相关性、集聚特征及其时空跃迁进行空间统计分析,借助分位数回归与时空跃迁嵌套模型,揭示在时间和空间推移的双重作用下中国各省区碳排放强度的时空跃迁机制。研究结果表明:(1)中国30个省区的碳排放强度在时空分布上并不是完全随机状态,各个省区碳排放强度之间具有显著的空间相关性特征,碳排放强度的变动趋势会受到其相临近省区碳排放强度的影响,省域间的碳排放强度在空间分布上呈现"集聚"与"分异"并存的时空演进特征。(2)中国碳排放强度空间集聚趋势增强,具有高度的凝固性和较低的流动性,10个高碳排放强度省区碳排放强度的稳定性将成为制约中国碳排放强度整体跃迁的重点省区,相关省区的跃迁性将成为驱动中国碳排放强度整体跃迁的关键省区。(3)各省区的碳排放强度空间集聚过程中存在时空跃迁的驱动模式和制约模式,分位数回归模型能够很好地解释各驱动因素对碳排放强度时空跃迁的驱动机制,不同响应阶段的驱动因素的分位数与碳排放强度时空跃迁类型之间具有很强的嵌套性。(4)根据各省区碳排放强度时空演进及其跃迁机制的分析结果,进一步提出加强对关键省区碳排放强度的有效监测与治理,加大碳排放的约束力度等差异化的碳减排调控措施。     

中国工业碳排放达峰的情景预测与减排潜力评估

实现2030年碳排放达峰不仅是中国为应对全球气候变化向国际社会做出的郑重承诺,也是中国未来经济结构转型与可持续发展的必然选择。基于中国实现2030年碳排放达到峰值的宏观目标为背景,本文以中国碳排放的主要行业工业为研究对象,首先运用拓展的STIRPAT模型对工业及其9个细分行业的碳排放达峰进行了情景预测,然后基于公平和效率的双重视角对工业细分行业的减排潜力进行评估。研究表明:(1)仅有低碳情景和抑制排放情景2可以实现中国碳排放2030年达峰,低碳情景是实现中国工业碳排放达峰的最佳发展模式,达峰时间最早(2030年),峰值最低(140.43亿t)。激进排放情景则是最差的发展模式,达峰时间最晚(2036年),峰值也最高(150.09亿t)。(2)工业内部各细分行业碳排放的最优达峰情景差别较大。建材和纺织制造业能够实现提前达峰,可以在这类行业率先实施达峰管理措施,使其带动其他行业陆续达峰。(3)最具减排潜力的行业是石油制造业,其次是电力行业,这些减排潜力较大的行业应该成为国家节能减排的重点对象。(4)基于工业各细分行业在减排公平性和效率性上的差异将工业9个细分行业分为四类。其中,石油、钢铁制造业和电力行业属于"高效高公平行业";化工、建材制造业属于"低效高公平行业";采掘业属于"高效不公平行业";纺织、轻工和机电制造业属于"低效不公平行业"。中国应针对不同类型的行业制定出相应的减排战略,将减排重点放在各行业最具潜力的方面。最后,文章对实现中国工业碳排放达峰管理提出了几点政策建议。     

基于卫星夜间灯光数据的中国分省碳排放时空模拟

中国能源统计数据"横向不可比,纵向不可加"现象依然突出,尤其是分省能源消费统计千差万别,给分省碳排放评估带来了较大困难,如何利用卫星遥感数据科学合理地估算中国分省碳排放是当前亟须研究的问题。本文运用DMSP/OLS全球稳定夜间灯光数据,在通过相互校正、年内融合和年际间校正等系列处理得到中国分省稳定夜间灯光数据的基础上,首先分别构建中国分省稳定夜间灯光亮度DN值与人均碳排放和单位面积碳排放之间的时空地理加权回归模型,两个模型整体效果均较好,拟合优度分别高达96.74%和99.24%;其次运用稳定夜间灯光亮度DN值对分省人均碳排放和单位面积碳排放进行时空模拟;最后运用人口规模和土地面积对分省碳排放进行估算。估算结果显示:(1)整体来看,2000—2013年年均碳排放模拟值与实际值6.3349×109t较为接近,两个模型的相对误差均在0.5%以内。(2)分年度来看,所有年份的相对误差均在5%以内,2006年分省加总碳排放模拟值与实际碳排放6.2036×109t最为接近,绝对误差和相对误差均较小,两个模型模拟值的相对误差均为0.04%。(3)分省域来看,2000—2013年年均碳排放模拟值与实际碳排放均非常接近,除海南和宁夏外,其余28个省区市的相对误差均在1%以内。(4)分年度分省域来看,以2013年为例,40%省份的相对误差在2%以内,70%省份的相对误差在5%以内。从整体、分年度、分省域、分年度分省域的估算结果来看,基于稳定夜间灯光数据的中国分省碳排放时空模拟效果良好。因此,运用卫星夜间灯光数据可以较为准确地对中国分省碳排放进行估算和预测,为卫星遥感影像数据服务分省碳排放监测和评估提供一种补充性参考。