基于耦合协同理论的泥石流危险性评价研究

泥石流地质灾害是降雨、松散物源和自然地理条件共同作用的结果,在泥石流暴发形成过程中,降雨条件、物源条件和自然地理条件三者之间存在着复杂的耦合关系,各要素之间相互作用、协同演化。因此,根据系统耦合协同理论和熵值赋权理论,本文建立泥石流暴发系统的耦合协调评价模型,并对重庆市北碚区典型泥石流单沟进行了耦合协调程度和危险性评价,评价结果与泥石流暴发的实际情况相吻合,能够为泥石流灾害的预防提供理论支撑。     

间隔流动分析法测定水中总磷

采用间隔流动分析法(SFA)测定地表水和城镇污水处理厂废水中的总磷,并与现行国标方法作比对,发现悬浮物对SFA法的结果存在一定的干扰,并对此进行了详细讨论且设计了一系列实验。实验结果表明使用均质机对水样均质能够有效消除悬浮物对测定结果的影响。水样经均质处理后两种方法测定结果相对误差小于3.0%。SFA法绘制的校准曲线线性大于0.999 5,标准样品的平行测定RSD≤1.5%,方法检出低限为0.009 mg/L,地表水样品加标回收率为91.4%～97.7%。     

潜流人工湿地填料筛选及其对小城镇微污染水的修复性能评价

为了选择适合小城镇潜流人工湿地的填料,选取小城镇较为常见的材料(废砖、卵石、碎石),结合物化性质,研究25℃下填料对磷的吸附效果,并分析了填料种类对野外潜流人工湿地运行的影响。结果表明:(1)25℃时,3种填料对磷的吸附量随着溶液中初始磷浓度的增加而增加,吸附能力依次为废砖>碎石>卵石;(2)野外潜流人工湿地运行过程中,随HRT的延长,组合填料湿地WL1和废砖填料WL2湿地对总磷的净化效果有所提高,且WL2湿地对总磷的去除效果略优于WL1。因此,可以选择废砖作为小城镇潜流人工湿地系统的填料。     

寒冷地区亚麻废水处理工艺的对比分析

亚麻废水是一种较难降解的废水,采用气浮-完全推流曝气工艺和UASB法处理亚麻加工厂废水,从能耗、工艺特点、运行管理上进行对比。结果表明,采用气浮-完全推流曝气工艺在处理此类废水中可收到良好成效,且废水处理成本为0.6-0.7元/m3。     

人群密度对人群拥挤事故的影响

为了研究公共场所的人群密度与拥挤事故的发生概率.基于连续人群流动模型,从人群密度角度探讨了人群拥挤事故发生的机理.由于不同民族个体生理尺寸的差异,人群最大忍受密度不同,以此作为判断人群拥挤事故的标准,并结合我国情况提出我国人群最大忍受密度为9人/m2.最后模拟了某个拥挤事故场景,用该模型对其进行拥挤事故分析.结果表明,连续人群流动模型可以用于预测拥挤事故的发生,对预防和控制人群拥挤事故具有一定的指导意义.     

Experimental investigation of the e ect of flow turbulence and sediment transport patterns on the adsorption of cadmium ions onto sediment particles

The mechanism of flow turbulence,sediment supply conditions,and sediment transport patterns that affect the adsorption of cadmiumions onto sediment particles in natural waters are experimentally simulated and studied both in batch reactors and in a turbulencesimulation tank.By changing the agitation conditions,the sediment transport in batch reactors can be categorized into bottom sediment-dominated sediment and suspended sediment-dominated sediment.It is found that the adsorption rate of bottom sediment is much lessthan that of suspended sediment,but the sediment transport pattern does not affect the final(equilibrium)concentration of dissolvedcadmium.This result indicates that the parameters of an adsorption isotherm are the same regardless of the sediment transport pattern.Inthe turbulence simulation tank,the turbulence is generated by harmonic grid-stirred motions,and the turbulence intensity is quantifiedin terms of eddy diffusivity,which is equal to 9.84F(F is the harmonic vibration frequency)and is comparable to natural surfacewater conditions.When the turbulence intensity of flow is low and sediment particles stay as bottom sediment,the adsorption rateis significantly low,and the adsorption quantity compared with that of suspended sediment is negligible in the 6 h duration of theexperiment.This result greatly favors the simplification of the numerical modeling of heavy metal pollutant transformation in naturalrivers.When the turbulence intensity is high but bottom sediment persists,the rate and extent of descent of the dissolved cadmiumconcentration in the tank noticeably increase,and the time that is required to reach adsorption equilibrium also increases considerablydue to the continuous exchange that occurs between the suspended sediment and the bottom sediment.A comparison of the results ofthe experiments in the batch reactor and those in the turbulence simulation tank reveals that the adsorption ability of the sediment,andin particular the adsorption rate,is greatly over-estimated in the batch reactor.     

Sustainability issues in sheet metal forming processes: an overview

Environmental sustainability in manufacturing is nowadays an urgent and remarkable issue and the main concerns are related to more efficient use of materials and energy.In sheet metal forming processes there is still a lack of knowledge in this field mainly due to the need of a proper modelling of sustainability issues and factors to be taken into account. The aim of this paper is mainly to underline the state of the art from a forming point of view about the sustainability contributions offered in any phase of a product life cycle. Actually, a lack in terms of comprehensive contributions is present in the technical literature, thus, the authors try to give a sort of holistic vision aimed to provide basic guidelines in order to help in identifying the possible solutions with regard to all the phases of a forming product life cycle. The main attention was paid to sheet metal forming technologies. The paper gives an overview of the main topics concerning sheet metal forming problems related to energy and resource efficiency with the aim to stress the principal contributions which may derive from such processes to environmental performances of manufacturing.     

基于ARDL方法分析福建省资源利用与经济增长关系

运用物质流分析方法以及最新发展的自回归分布滞后模型(ARDL),对福建省1990~2008年资源利用和实际GDP二者关系进行检验和分析.采用了物质流分析指标中直接物质投入来表征区域资源利用量.ARDL边界检验结果表明,资源利用和经济增长间存在稳定的长期均衡关系.进一步通过ARDL模型揭示了区域经济增长对资源利用长期弹性系数,其值约为0.73,通过误差修正模型揭示了短期弹性系数,表明了经济增长到资源利用的长期格兰杰因果关系.对福建省经济增长和资源保护战略提出了政策建议.这一研究思路和方法具有普适性,可以适用于其他地区关于资源利用和经济增长的问题的讨论和研究.     

连续流动氢化物发生原子荧光法测定水中硒

文章介绍连续流动一氢化物发生一原子荧光测定水中硒的方法,研究了盐酸浓度、硼氢化钾浓度、灯电流、光电倍增管负高压、泵速、载气和屏蔽气流量等对测定硒的影响,找出测定水中硒最佳条件,在最佳条件下,校准曲线相关系数为0.9999.方法检出限为0.0095μg/L,方法的测量范围为0.038-300μg/L,回收率在91.8%-...