介孔TiO2纤维的制备及其光催化性能

采用溶胶-凝胶和水蒸气活化热处理技术制备了介孔TiO2纤维,考察了各种因素对介孔TiO2纤维光催化活性的影响,并对介孔TiO2纤维结构进行了表征。介孔TiO2纤维的最佳制备条件：n（TBOT）∶n（C6H10O3）∶n（H2O）∶n（C3H8O）=1∶0.4∶2.0∶16,搅拌时间80min,Si与Ti的摩尔比为0.15,采用分段程序升温工艺,活化温度为700℃。所得介孔TiO2纤维比表面积为127.7m2/g,最可几孔径为7.3nm,具有极高的热稳定性及抗晶型转变能力,反应时间75min时活性艳红X-3B降解率为99.3%。     

麦饭石对NOx的吸附

研究了麦饭石在不同预处理方法、粒径、活化温度、NOx初始质量浓度和吸附时间等条件下对NOx的吸附性能。实验结果显示：粒径为0.18mm的麦饭石经过400～600℃活化1h后,NOx吸附率大于99%,饱和吸附量大于6.3m g/g。经4次重复活化后,麦饭石对NOx的吸附效果仍然很好,可作为处理含NOx废气的吸附剂。     

由粉煤灰提取高纯纳米氧化铝活化过程研究

使用煅烧-沥滤新工艺从粉煤灰中提取高纯氧化铝,探讨了活化过程中活化剂的选择、煅烧工艺等因素对粉煤灰活化过程的影响,结果表明:选用Na2CO3为活化剂,900℃下煅烧2h,粉煤灰被充分活化,可以制得晶型结构为α-Al2O3的纳米粉体,形态为类球状,平均粒径为30-50nm,纯度大于99.6%.该方法具有提取率高、能耗低、污染小、易于操作等优点.     

胶态水合二氧化锰絮凝粒子的结构形貌及其混凝机理

采用透射电镜技术观察了胶态水合二氧化锰絮凝粒子的结构形貌并采用Zeta电位测定仪对粒子的荷电特征进行了研究;利用红外光谱、XRD等技术对粒子的界面性质进行了表征;通过混凝试验考察了KMnO₄ 还原法制备的水合二氧化锰胶体对原水的混凝性能并探讨了混凝机理.结果表明,胶态水合二氧化锰粒子在去离子水和原水中荷负电,在去离子水中,粒子直径为10　nm并形成网状结构,有利于发挥吸附架桥作用;粒子具有丰富的表面羟基,比表面积为151.422　m²/g,为δ-MnO₂,表现出优良的吸附污染物的界面特性;较低投量的胶态水合二氧化锰表现出对原水的优良混凝效能和去除有机微污染的效能.     

Review of the methods used for isolating pharmaceutical lead compounds from traditional medicinal plants

The possibility of finding new medicines from natural sources is one of the more commonly cited reasons for preserving biodiversity, and employing indigenous knowledge of traditional healing remedies greatly increases the likelihood of discovering these hidden medicinal compounds. The main difficulties in using natural products as a source for pharmaceutical lead compounds involve separating the plethora of compounds from the original extract, as well as the gamble of time and money invested in an activity that may not yield a novel compound. However, while these difficulties exist, the potential of natural products still far outweighs the limitations of the simple structures and known modes of action of synthetic lead compounds. As such, the production of novel medicines, particularly for cancer and human immunodeficiency virus (HIV) treatments as well as the inhibition of antibiotic-resistant bacteria, now requires the utilization of natural products. This paper provides a review of the current methods used in elucidating pharmaceutical lead compounds from natural sources, focusing on plant samples in particular.     

Mechanical treatment of automobile shredder residue for its application as a fuel

Enforcement of the Automobile Recycling Law in Japan requires utilization of automobile shredder residue (ASR). However, the high contents of copper (∼5%) and chlorine (∼1%) in ASR stand in the way of practical application. We studied methods for the removal of copper and chlorine from ASR so that it could be utilized as a fuel. By compression of the ASR for solidification with an extruder, the polyvinylchloride (PVC) that covered electrical cables was softened and stripped from the copper wire. The solidified ASR was comminuted with cutter mills and classified by dry density separation. The copper content of the obtained light products was 0.2%–0.5%. Furthermore, we studied the possibility of dechlorination of the ASR by mechanochemical (MC) activation. The light product of the ASR was milled with CaO or CaCO₃. The chlorine content decreased to about one-tenth of the original value after MC activation over 8 h. Therefore, the combined processing of softening–stripping and comminution liberated the PVC-covered cables and decreased the copper content of the ASR. In addition, dechlorination of the ASR was also possible by MC activation with the addition of calcium compounds.     

发动机的绿色化学设计

发动机绿色化学设计以发动机化学设计概念和发动机化学反应器模型为基础,旨在实现发动机材料选择、能源利用和环境效应之间的最佳综合效益．发动机燃料系统绿色化学设计的范畴包括：汽油无铅化与汽油抗磨性,柴油低硫化与柴油润滑性,生态燃料与生态摩擦学,汽油机沉积物与汽油清净剂,柴油机颗粒（碳烟）与消烟助燃剂． 发动机润滑系统绿色化学设计的范畴包括：润滑油和添加剂与排放催化转化,润滑剂生物降解性与生物降解润滑剂,润滑油使用与质量监控． 发动机燃料／润滑系统材料绿色化学设计的范畴包括：催化助燃／补燃作用,低散热发动机高温润滑,发动机机械与化学材料制造． 发动机绿色效应的实现取决于发动机诸系统绿色化学设计问题的解决程度．     

大气化学模式的数值计算方法

大气化学模式计算的一个重要研究热点是如何快速精确地对相互关联的非线性常微分方程组(ODES)进行数值积分求解。由于大气中各物种寿命长短相差很大,导致ODE_s具有了很强的刚性,因而在数值求算过程中存在着计算精度和计算效率的平衡问题。笔者介绍了当前几种常见的大气化学模式的计算方法,包括GEAR,QSSA(MQSSA),Y&B(MY&B),RADM,LSODE,SMVGEAR,小参数法,Gong and Cho及TWOSTEP等,并结合当前本领域内的部分研究成果对一些重要的方法进行了比较和分析。      

喜马拉雅山中段北坡对流层中上部大气降水化学的高程分布特征

1997年夏季在希夏邦马峰北坡达索普冰川区(28°33′N,85°44′E)海拔5800m～7000m区间对4次降雪过程进行了系统的采样工作,目的是认识全球偏远地区对流层中上部大气成分的高程分布特征.达索普冰川区夏季4次降水中,局地大陆性气团降水SO₄^2-、NO₃^-、Ca²⁺和Mg²⁺之间存在显著的正相关性,而海洋性气团降水4种离子之间的相关性变化较大,说明在夏季低尘埃阶段大气中各种离子的主导来源处在短期的(如数天)变化中.这种离子主导来源的变化同时也影响了降水中离子的高程分布特征.总体上达索普冰川区夏季降水中NO₃^-、Ca²⁺、Mg²⁺浓度随海拔的升高呈减小趋势,SO₄^2-浓度则为增大趋势.     

Spatial patterns of tungsten and cobalt in surface dust of Fallon,Nevada

Spatial patterns of tungsten and cobalt are described for surface dust of Fallon, Nevada, where a cluster of childhood leukemia has been ongoing since 1997. In earlier research, airborne tungsten and cobalt was shown to be elevated in total suspended particulates in Fallon. To fine-tune the spatial patterns of tungsten and cobalt deposition in Fallon, surface dust was collected in a grid pattern within as well as outside of Fallon to establish background concentrations of metals. In surface dust, tungsten and cobalt show sharp peaks (934 ppm and 98 ppm, respectively) within Fallon just north of highway 50 and west of highway 95. These two peaks overlap spatially, and given the grid pattern used for collecting surface dust, the source area of these two airborne metals can be pinpointed to the vicinity of hard-metal industry located north of highway 50 and west of highway 95. Fallon is distinctive in west central Nevada because of high airborne tungsten and cobalt particulates, and given its cluster of childhood leukemia, it stands to reason that additional biomedical research is in order to test directly the leukogenicity of combined airborne tungsten and cobalt particulates.