Development and Validation of the Total HUman Model for Safety (THUMS) Toward Further Understanding of Occupant Injury Mechanisms in Precrash and During Crash

Objective: Active safety devices such as automatic emergency brake (AEB) and precrash seat belt have the potential to accomplish further reduction in the number of the fatalities due to automotive accidents. However, their effectiveness should be investigated by more accurate estimations of their interaction with human bodies. Computational human body models are suitable for investigation, especially considering muscular tone effects on occupant motions and injury outcomes. However, the conventional modeling approaches such as multibody models and detailed finite element (FE) models have advantages and disadvantages in computational costs and injury predictions considering muscular tone effects. The objective of this study is to develop and validate a human body FE model with whole body muscles, which can be used for the detailed investigation of interaction between human bodies and vehicular structures including some safety devices precrash and during a crash with relatively low computational costs.

Methods: In this study, we developed a human body FE model called THUMS (Total HUman Model for Safety) with a body size of 50th percentile adult male (AM50) and a sitting posture. The model has anatomical structures of bones, ligaments, muscles, brain, and internal organs. The total number of elements is 281,260, which would realize relatively low computational costs. Deformable material models were assigned to all body parts. The muscle–tendon complexes were modeled by truss elements with Hill-type muscle material and seat belt elements with tension-only material. The THUMS was validated against 35 series of cadaver or volunteer test data on frontal, lateral, and rear impacts. Model validations for 15 series of cadaver test data associated with frontal impacts are presented in this article. The THUMS with a vehicle sled model was applied to investigate effects of muscle activations on occupant kinematics and injury outcomes in specific frontal impact situations with AEB.

Results and Conclusions: In the validations using 5 series of cadaver test data, force–time curves predicted by the THUMS were quantitatively evaluated using correlation and analysis (CORA), which showed good or acceptable agreement with cadaver test data in most cases. The investigation of muscular effects showed that muscle activation levels and timing had significant effects on occupant kinematics and injury outcomes. Although further studies on accident injury reconstruction are needed, the THUMS has the potential for predictions of occupant kinematics and injury outcomes considering muscular tone effects with relatively low computational costs.     

Rapid and simple spectrophotometric determination of persulfate in water by microwave assisted decolorization of Methylene Blue

A rapid and simple method for determination of persulfate in aqueous solution was developed. The method is based on the rapid reaction of persulfate with Methylene Blue(MB) via domestic microwave activation, which can promote the activation of persulfate and decolorize MB quickly. The depletion of MB at 644 nm(the maximum absorption wavelength of MB) is in proportion to the increasing concentration of persulfate in aqueous solution. Linear calibration curve was obtained in the range 0–1.5 mmol/L, with a limit of detection of 0.0028 mmol/L. The reaction time is rapid(within 60 sec), which is much shorter than that used for conventional methods. Compared with existing analytical methods, it need not any additives, especially colorful Fe2+, and need not any pretreatment for samples, such as p H adjustment.     

Water chemistry controlled aggregation and photo-transformation of silver nanoparticles in environmental waters

The inevitable release of engineered silver nanoparticles (AgNPs) into aquatic environments has drawn great concerns about its environmental toxicity and safety. Although aggregation and transformation play crucial roles in the transport and toxicity of AgNPs, how the water chemistry of environmental waters influences the aggregation and transformation of engineered AgNPs is still not well understood. In this study, the aggregation of polyvinylpyrrolidone (PVP) coated AgNPs was investigated in eight typical environmental water samples (with different ionic strengths, hardness, and dissolved organic matter (DOM) concentrations) by using UV–visible spectroscopy and dynamic light scattering. Raman spectroscopy was applied to probe the interaction of DOM with the surface of AgNPs. Further, the photo-transformation and morphology changes of AgNPs in environmental waters were studied by UV–visible spectroscopy, inductively coupled plasma mass spectrometry, and transmission electron microscopy. The results suggested that both electrolytes (especially Ca^2 + and Mg^2 +) and DOM in the surface waters are key parameters for AgNP aggregation, and sunlight could accelerate the morphology change, aggregation, and further sedimentation of AgNPs. This water chemistry controlled aggregation and photo-transformation should have significant environmental impacts on the transport and toxicity of AgNPs in the aquatic environments.     

Wood carbon content of tree species in Eastern China: interspecific variability and the importance of the volatile fraction

Data on the mass density and carbon content of tree organs, and in particular stem wood, are essential for accurate assessments of forest carbon sequestration. However most available data, including that for East Asia, has neglected the volatile C fraction. Wood samples were collected and assayed for C content from 14 native tree species in Jilin Province, NE China. C content showed statistically significant variation among species, ranging from 48.4% to 51.0%. The volatile C fraction was non-negligible, averaging 2.2%, and showed high variation among species. As found in prior studies, wood C content was appreciably higher in conifer than hardwood (angiosperm) species (50.8+/-0.1% vs. 49.5+/-0.2%, respectively). Wood carbon density (gC/cm(3)) showed very high inter-specific variation, due mainly to differences in wood specific gravity. Our analyses, in conjunction with recently published data from North America, indicate a global mean value of 47.5+/-0.5% wood C content exclusive of volatile C; the widely used 50% figure corresponds more closely to total wood C inclusive of the volatile fraction. Failure to include volatile C or to use species- or higher-taxon-specific C content values in forest C assessments is likely to introduce biases on the order approximately 4-6%. In addition, the stocks and flows of the volatile C fraction in wood are in themselves an important and sorely neglected aspect of forest C processes likely to be strongly impacted by harvests and other management practices.     

不同磁黄铁矿自养反硝化脱氮除磷作用

氮磷排放标准日趋严格,开发高效廉价脱氮除磷材料已成为研究热点.采用黄铁矿与赤铁矿在管式炉中氮气气氛下600 ℃煅烧,得到硫化赤铁矿形成的磁黄铁矿、黄铁矿热分解形成的磁黄铁矿,构建磁黄铁矿-方解石体系处理含氮磷模拟废水,对比不同方式制备的磁黄铁矿、天然磁黄铁矿、黄铁矿、硫磺脱氮除磷性能,考察不同磁黄铁矿晶体结构和结晶度差异及其对脱氮除磷影响,探究不同体系中矿物结构和微生物群落变化.结果表明：黄铁矿热分解产物以六方磁黄铁矿为主;硫化赤铁矿产物以低结晶度的单斜磁黄铁矿为主,因而表现出优异的脱氮除磷活性,氮磷去除率分别为99.8%和96.8%.铁硫化物与微生物反应产物的XRD、SEM和FE-TEM分析结果表明,微生物能有效利用磁黄铁矿进行脱氮,磷酸盐主要以FePO₄形式被去除.群落分析结果表明铁硫化物脱氮除磷体系中的主要功能菌属为Thiobacillus和 Sulfurimonas,结晶度低的单斜磁黄铁矿更有利于Thiobacillus定向富集.     

Hydrothermal-treated Pt/Al2O3 as an excellent catalyst for toluene total oxidation

The preparation of highly active supported noble metal catalysts with a low noble metal loading has always been the ultimate goal of researchers working on catalysis. Hydrothermally treated Pt/Al₂O₃ (Pt/Al₂O₃-H) exhibits better catalytic activity than that (Pt/Al₂O₃-C) treated via the conventional calcination approach. At the high space velocity of 100,000 mL/(g∙hr), the temperature that correspond to 50% toluene conversion (T₅₀) of Pt/Al₂O₃-H is 115°C lower than that of Pt/Al₂O₃-C, and the turnover frequency (TOF) value can reach 0.0756 sec⁻¹. The mechanism by which the hydrothermal approach enhances Pt/Al₂O₃ activity has been investigated. The structure associated with the high catalytic activity of Pt nanoparticles (NPs) can be retained via hydrothermal treatment. Furthermore, the support is transformed to AlO(OH) with numerous surface hydroxyl groups, which in turn can facilitate the adsorption of toluene. And the synergistic effects of Pt NPs and AlO(OH) increases the contents of Pt in oxidation state and active oxygen, which are beneficial for toluene oxidation.     

Phenol degradation in waters with high iodide level by layered double hydroxide-peroxodisulfate: Pathways and products

Recently, layered double hydroxide-peroxodisulfate (LDH-PDS) as an advanced oxidation system can effectively remove organics by the pathway of free radical. However, little has been known if there is a potential risk regarding the formation of high toxic iodine byproducts through another pathway when LDH-PDS is used in high iodide waters at coastal areas. Therefore, this study investigated phenol degradation pathways and transformation products to evaluate both removal mechanism and potential risk by LDH-PDS in high iodide waters. The results showed that in LDH-PDS system, with the degradation of PDS, phenol degraded till below detection limit in 1 hr in the presence of iodide, while PDS and phenol were hardly degraded in the absence of iodide, indicating iodide accelerated the transformation of PDS and the degradation of phenol. What is more, it reached the highest phenol removal efficiency under the condition of 100 mg/L LDH, 0.1 mmol/L PDS and 1.0 mmol/L iodide. In LDH-PDS system, iodide was rapidly oxidized by the highly active interlayer PDS, resulting in the formation of reactive iodine including hypoiodic acid, iodine and triiodide instead of free radicals, which contributed rapid degradation of phenol. However, unfortunately toxic iodophenols were detected. Specifically, 2-iodophenol and 4-iodophenol were formed firstly, afterwards 2,4-diiodophenol and 2,6-diiodophenol were produced, and finally iodophenols and diiodophenols gradually decreased and 2,4,6-Triiodophenol were produced. These results indicated that LDH-PDS should avoid to use in high iodide waters to prevent toxic iodine byproduct formation although iodide can accelerate phenol degradation.     

Heavy metal bioaccumulation in selected medicinal plants collected from Khetri copper mines and comparison with those collected from fertile soil in Haridwar,India

Heavy metal distribution in medicinal plants is gaining importance not only as an alternative medicine, but also for possible concern due to effects of metal toxicity. The present study has been focused on emphasizing the heavy metal status and bioaccumulation factors of V, Mn, Fe, Co, Cu, Zn, Se (essential metals) and Cr, Ni, Cd, As and Pb (potentially toxic metals) in medicinal plants grown under two different environmental conditions e.g., near to Khetri copper mine and those in fertile soils of Haridwar, both in India, using Instrumental Neutron Activation Analysis (relative method) and Atomic Absorption Spectrometry. The copper levels in the medicinal plants from Khetri were found to be 3-4 folds higher (31.6–76.5 mg kg^?1) than those from Haridwar samples (7.40–15.3 mg kg^?1), which is correlated with very high copper levels (763 mg kg^?1) in Khetri soil. Among various heavy metals, Cr (2.60–5.92 mg kg^?1), Cd (1.47–2.97 mg kg^?1) and Pb (3.97–6.63 mg kg^?1) are also higher in concentration in the medicinal plants from Khetri. The essential metals like Mn (36.4–69.3 mg kg^?1), Fe (192–601 mg kg^?1), Zn (24.9–49.9 mg kg^?1) and Se (0.13–0.91 mg kg^?1) and potentially toxic metals like Ni (3.09–9.01 mg kg^?1) and As (0.41–2.09 mg kg^?1) did not show much variations in concentration in the medicinal plants from both Khetri and Haridwar. The medicinal plants from Khetri, e.g., Ocimum sanctum, Cassia fistula, Withania somnifera and Azadirachta Indica were found rich in Ca and Mg contents while Aloe barbadensis showed moderately high Ca and Mg. Higher levels of Ca-Mg were found to correlate with Zn (except Azadirachta Indica). The bioaccumulation factors (BAFS) of the heavy metals were estimated to understand the soil-to-plant transfer pattern of the heavy metals. Significantly lower BAF values of Cu and Cr were found in the medicinal plants from Khetri, indicating majority fraction of these metals are precipitated and were immobilized species unsuitable for plant uptake. Overall, Withania somnifera (Ashwagandha) showed very high metal bioaccumulation.     

废弃混凝土对C_3S形成动力学的影响

废弃混凝土中石灰石的含量比较稳定,适合取代天然石灰石作为钙质原料配制水泥生料,并含有少量的SiO2,可以起部分硅质原料的作用。硬化的水泥浆体在高温下脱水形成氧化钙、氧化铝和氧化铁等氧化物,都是制造水泥所必须的氧化物。实验室利用20%和40%的废弃混凝土代替部分石灰石制备水泥熟料。研究了废弃混凝土对硅酸盐水泥熟料形成动力学的影响。用快速滴定法测定了不同熟料中f-CaO含量,根据文章提出CaO反应生成C3S的转化率,并用Amhenius公式计算了熟料中C3S形成反应的表观活化能。研究表明:废弃混凝土能改善生料的易烧性,并能降低熟料的烧成温度。     

污泥基活性炭的制备、表征及其应用

以城市生活污水厂脱水车间污泥为原料,采用化学活化法(ZnCl2为活化剂)在活化剂浓度为45%、活化温度为600℃、浸渍温度为45℃、活化时间为50min条件下制备污泥基活性炭。对污泥基活性炭进行了孔结构、扫描电镜(SEM)、红外光谱(FTIR)、XRD等表征分析。结果表明:该条件下制备出的污泥基活性炭碘吸附值为427.51mg/g,比表面积为329.48m2/g,大孔、中孔、微孔容积分别为0.19,0.12,0.15cm3/g。平均孔径为3.953nm。将其应用于生活污水处理,考察了污泥基活性炭投加量、pH、吸附时间对其吸附性能的影响。