Trihalomethanes formation in water treatment plants and distribution lines: a monitoring and modeling scheme

Monitoring and modeling of the concentrations of trihalomethanes (THMs) within four water treatment plants (WTPs) and distribution lines in Fayoum City, Egypt, were studied. Sampling sites for raw and treated waters were determined by global positioning system and the Arc geographic information system software was used for mapping. THMs were monitored using 25 sampling points located at the plant exit and through the distribution lines up to the plant extremity. Results indicated that the THMs concentration varied significantly but it was very rarely higher than the allowed maximum contaminant level of 100 μg L^?1. However, at the dead zones in the distribution lines, the THMs increased by about 160% compared to in-plant level. Furthermore, the level of THMs in hot months was about 1.3 times higher than in cold ones. The influence of some independent variables such as temperature, pH, ammonia concentration, total organic carbon and color were investigated by Pearson model to find their correlation with the rate of THMs formation in WTPs. The resulted R values ranged from 0.81 to 0.98. Successful application of the model to a selected region on the distribution lines has resulted in a correlation coefficient of 0.98.     

Oxidative stress in the freshwater cyprinid crucian carp (Carassius carassius L.) upon chronic exposure to endosulfan

Oxidative stress and antioxidant responses of crucian carp, upon chronic exposure to endosulfan, were evaluated in vivo. The lethal concentration (LC_50–96?h) was 70 μg L^?1; on its basis, the fish were exposed to endosulfan at 20, 35, and 50 μg L^?1 and autopsy was done on days 1, 2, 3, 4, 7, 14, 21, 28, and 35. Lipid peroxidation was induced in a concentration-dependent manner, being highest at 50 μg L^?1 (3/4 LC_{50–96 h}, sub-lethal concentration-I, SL-I) on day 4 (720% versus control), followed in its extent (490%) at 30 μg L^?1 (1/2 LC_{50–96 h}, sub-lethal concentration-II, SL-II) on day 7 and lowest (260%) at 10 μg L^?1 (1/4 LC_{50–96 h}, sub-lethal concentration-III, SL-III) on day 14. Glutathione showed a concentration- and time-dependent elevation in the initial phase, with highest level on day 4 (180%) at SL-I, but showed significant reduction in all test concentrations from day 21 of post-exposure. Superoxide dismutase was decreased significantly throughout the study, with highest reduction (63%) on day 4 at SL-I; catalase increased in all test concentrations up to day 14 but showed a significant decrease from the day 28 of post-exposure. The potential role of these parameters as indicators of pesticide pollution in aquatic systems is discussed.     

Toxic substances: Measures and measurements†

The formulation of a sound policy for environmental protection and toxic substances control requires knowledge of the presence and concentration of environmental contaminants. For this reason monitoring programs have been set up in the Netherlands for water, drinking water, and air pollution. The Netherlands system for air pollution, monitoring of the substances SO2, NOχ, CO, O₃ is now fully automated. Some examples will be given to show the acquisition and management and interpretation of air pollution measurements.

Various smaller projects, supported by the Department of Health and Environmental Protection include measurement of indoor air‐contaminants, contaminants in soil and hazardous waste sites, and contaminants in biotic samples such as for instance PCB's in eels and seals and mussels. Moreover a Coordinating Committee regularly collects measurements from various sources in the Netherlands regarding pesticide residues and contaminants in food.

For cost‐effective monitoring the accuracy of the measurements must be chosen with regard to the biological effect concentration of the pollutant. The necessity of proper control measurements to establish background levels and the necessity of ring‐tests to increase interlaboratory reproducibility is discussed. In cost‐effective monitoring the minimum number of measurements, which are necessary to check the effect of environmental protection measures, must be defined through proper sampling.     

A model for approving and controlling sea water pollution for recreational activity

A model for assessing approval of a beach for recreational water activity was proposed. The model is based upon a sanitary survey together with intensive microbiological monitoring three times a day, five times a week for a month. In highly populated areas, continuous surveys once a day, five days a week are needed in order to assure the cleanliness and safety of these beaches.

Due to our intensive monitoring system, we can assure that Tel‐Aviv has one of the cleanest beaches near a metropolitan area in the Mediterranean Sea.     

两栖动物监测方法和国外监测计划研究

两栖动物是生物多样性的重要组成部分,对环境变化非常敏感,可被用作环境监测的指示物种.介绍了两栖动物监测的指标、时间、频次以及监测的主要方法,包括目视遇测法、样线（带）法、繁殖区调查法、鸣叫调查法、围栏陷阱法、人工庇护所法、人工隐蔽物法和标志重捕法,分析了各种方法的适用性和局限性;还详细介绍了国外比较成熟的2个两栖动物监测计划——美国两栖动物监测计划和英国两栖爬行动物监测计划.     

化学工业园区重大环境风险源监控技术研究与应用

基于监控系统综合集成的思想,以重大环境污染事件风险源监控技术规范、重大危险源控制规章、污染源在线监测为基础,从监控指标体系、监控布点范围及监控技术筛选三方面建立化学工业园区中重大环境风险源监控技术体系. 结果表明:重大环境风险源监控指标体系主要从企业内部及企业周边敏感受体两方面进行构建;监控范围从重大环境风险源本体、缓冲区及环境敏感受体三方面确定;监控技术筛选时考虑了环境风险源的状态、监控技术方法的实用性和环境风险源/受体属性. 以上海闵行区化学工业园区为例,经调研统计,该化学工业园区共有重大风险源87个,其中罐区60个、排放口12个,其余分散在库房、生产场所等处. 根据化学工业园区企业内部风险设施及周围敏感受体的监控指标、监控范围及常用监控技术,制定了以罐区、排放口的特征风险物质为指标,以储罐的温度、压力、图像视频、液位及排放口特征风险物质浓度的传感器监控技术为主的监控方案.      

冶金行业环境污染物的特征与监测技术综述

冶金行业是国民经济重要的基础原材料工业,在其制造体系中大量的物质、产品流、废弃物、能量转换过程、多形式的排放过程都对环境造成不同层次和程度上的影响。针对不同工艺产生的污染物特征及主要污染物的种类,综述了环境监测运用的各类监测技术、监测方法,为环境管理、污染源控制、环境规划等提供科学依据。     

A new generation of coastal monitoring platforms

The need for new instruments and systems for environment monitoring encouraged the development of a network of coastal platforms combining a high versatility with ease of use and affordability. Almost every instrument can be fitted on the platforms, thanks to the large amount of available power provided by both solar panels and wind generators. All the platforms host a pumping system that pumps water from five depths into a measurement chamber where a multiparametric probe is fitted and from where other devices (e.g. samplers or analysers) can draw samples. In situ temperature measurements are provided at the same pumping depths. A colorimetric nutrient analyser and a meteorological station complete the basic equipment. On one of the platforms, a remotely controlled water sampler and an ADCP are also fitted. The data-acquisition and transmission system enables the platform to be controlled remotely using a special macro-commands set. Several examples of use are presented.     

单元模态应变能法在输电铁塔损伤识别中的应用

输电塔结构在灾害中发生倒塌的现象时有发生,故而对输电塔结构进行健康监测具有重要的实际意义。介绍了单元模态应变损伤指数(EMSDI)在结构损伤识别中的表达式,并将其应用于输电铁塔模型试验中。采用单元形函数代替原有模态曲率计算方法,可有效降低计算单元模态应变能的计算误差,从而增加了识别的准确性。在输电铁塔仿真模拟和试验中,对该识别方法的准确性和可靠性进行了验证。实例表明:单元模态应变损伤指数法能够准确地识别出结构的损伤位置,并可在某种程度上反映出损伤程度,可以应用到实际输电塔结构损伤识别中。     

大气环境影响评价现状空气质量监测布点技术方法

基于HJ2.2—2008《环境影响评价技术导则-大气环境》的规定,结合某石化焦化扩建案例实践,对大气环境影响评价现状空气质量监测方案的制定、监测布点原则与技术要点进行了深入系统地研究,进一步探讨了在环评中执行的具体问题及解决方案。