工业废气污染状况与脱硫除尘技术

对工业废气污染状况进行分析讨论,综述了工业废气的多种脱硫除尘技术。并指出应选择脱硫除尘效率高,运转可靠,不产生二次污染的方法。     

中国公路建设项目环境保护管理综述

综述了中国公路建没项目环境保护管理的有关规定，包括环境保护管理的内容与程序、分类管理、环境影响评价市批与环境影响咨洵收费管理等。     

宏观环境督察信息获取机制研究

本文对信息获取过程中的信息来源分析方法、信息采集方法、信息检索方法、信息加工方法进行了简要介绍,并将上述信息获取方法用于宏观环境督察信息获取过程中,研究了宏观环境督察信息获取机制,并对宏观环境督察信息获取过程进行了详细地分析,为后续的宏观环境督察信息发布提供了基础。     

Public participation in municipal solid waste source-separated collection in Guilin,China: status and influencing factors

Currently, China is facing critical problems regarding the management of municipal solid waste (MSW). The failure of existing pilot programs in implementing MSW source-separated collection highlights the need to analyze the factors significantly influencing public participation in this activity. To this end, a comprehensive analysis of MSW source-separated collection in Guilin, which is representative of wider areas located in inland China and with a GDP around the national average, was conducted. The research consisted of in-person interviews involving a questionnaire and theoretical analyses in terms of public perception, public awareness, public attitude, and willingness to pay. The analytical results identify the status of waste source-separated collection and influencing factors in implementation, and provides exercisable suggestions for decision makers in both China and more generally in industrializing countries to design promotion programs and education campaigns.     

贮罐类重大危险源三维风险分级模型研究

为了实现重大危险源分级监管,基于风险管理理论,建立贮罐类重大危险源定性三维分级模型和风险定量分级模型。提出风险评价敏感性因素,选取可能性影响因素、严重性影响因素、敏感性影响因素3类风险评价指标。使用层次分析法(AHP)计算贮罐风险分级指标权重。根据风险可接受准则,将贮罐类重大危险源风险等级划分为4级,实现基于三维风险模型的贮罐类重大危险源快速分级。结果表明:用贮罐类重大危险源三维风险分级模型,通过简单数学模型计算贮罐风险值,能为企业提供风险分级标准,有助于实现政府对贮罐类重大危险源分级监管。     

云南籼稻核心种质回交后代苗期耐冷性研究

早春低温和连续阴雨是导致籼稻烂秧的主要因素之一,筛选耐冷的种质资源,将耐冷性基因导入高产的籼稻品种之中是防止低温冷害最为经济有效的方法。加强籼籼稻杂交后代的苗期耐冷性研究,可为籼稻耐冷性育种提供条件。以235份云南籼稻核心种质和云南主栽籼稻品种滇屯502(Oryzasatica)配制的杂种F5、BC1F4、BC2F3和BC3F2代为材料,在昆明自然条件下,对亲本及其后代进行苗期(三叶)耐冷性研究。结果表明,(1)不同回交世代与杂种与亲本间的苗期耐冷强弱差异较大,总体趋势为回交供体亲本>F5>BC1F4>BC2F3>BC3F2;揭示了随着回交世代的增加,其回交杂种苗期耐冷性减弱,越来越趋于轮回亲本,在耐冷育种上对回交供体亲本及其早世代材料进行选择更易获得苗期强耐冷材料。(2)同一稻作区,回交供体亲本的苗期耐冷强于杂种后代;稻作区划间,回交供体亲本及杂种F5总趋势相近,滇中一季籼稻粳稻区和滇东北高原粳稻区材料耐冷最强,而BC1F4、BC2F3和BC3F23个回交世代存在一定差异。     

江苏省稻麦秸秆收集利用现状分析及对策

以江苏省稻麦秸秆收集为例,采用问卷调查与实地调研相结合的方法,调查了稻麦秸秆收集利用现状;结合当地稻麦收获期间的气象资料,分析了稻麦秸秆收集面临的困难。结果显示:(1)目前稻麦秸秆的主要利用方式是直接还田,供调研2个乡(镇)秸秆还田农户分别占调研户数的22.01%和28.75%;2个乡(镇)均有部分稻麦秸秆没有得到有效处理,乡(镇)B 50%以上的农户稻麦秸秆未被利用,被遗弃和焚烧的比例高达55%以上;(2)稻麦收获季节旬降水量为7.21~87.28 mm,旬降水时间为1.53~5.00 d,降水天气不仅影响稻麦的适时收获,更严重影响着秸秆的收集打捆、运输与贮存;(3)稻麦收获时间相对集中,大量秸秆短时间内产生,收种时间几乎完全重叠,可供秸秆收集的时间极短;(4)秸秆收集效益低,农户收集运输的收益约为60~90元·d-1,低于外出务工收入,难以吸引社会资本投入到秸秆收贮产业;(5)秸秆收集打捆装备缺乏,现有收集装备及技术亟需改进和完善,秸秆收集机械化水平低,直接影响到收集效率。因此,可收集时间短、受天气影响大、收集效益低、收集机械化水平低是当前阻碍稻麦秸秆收集的主要问题,应提升秸秆收集效益驱动力,加快稻麦收割打捆机研发,建立秸秆收集长效运行机制,以解决秸秆收集难题。     

Reasons for non-participation in a kerbside recycling scheme

In this article potential barriers to recycling are explored within a UK community of approximately 8000 households that are piloting a kerbside paper recycling scheme. All 1690 non-users of the scheme were surveyed for their decisions not to participate. A 43% response rate was generated from the survey and the reasons given by householders were coded into 12 categories. The main reasons for non-participation included insufficient paper and lack of space in which to locate the recycling bin. 62% of the non-participants reported that they were recycling paper using other facilities such as local bring schemes and charity collections. Strategies to increase participation in the kerbside scheme are suggested.     

ANALYZING THE IMPACT OF LAND USE ON SEWER SERVICE AREA PLANNING1

ABSTRACT: The density and distribution of land uses has important consequences for the planning of sewerage systems and for the costs of these systems. This paper examines these consequences using a simplified service area model. The model determines the area to be served by a central waste treatment plant, where alternative on-lot disposal systems are also available. The model is applied to various urban area configurations, which are summarized by their total populations and by their population density distributions. Both minimum regional cost and minimum local cost service area configurations are determined. In addition, the sensitivity of the model to the parameters of the cost and population density functions is assessed. It is found that the model is most sensitive to the parameters of the collection cost function.     

Investigation of the hydrodynamic behavior of diatom aggregates using particle image velocimetry

The hydrodynamic behavior of diatom aggregates has a significant influence on the interactions and flocculation kinetics of algae. However, characterization of the hydrodynamics of diatoms and diatom aggregates in water is rather difficult. In this laboratory study, an advanced visualization technique in particle image velocimetry (PIV) was employed to investigate the hydrodynamic properties of settling diatom aggregates. The experiments were conducted in a settling column filled with a suspension of fluorescent polymeric beads as seed tracers. A laser light sheet was generated by the PIV setup to illuminate a thin vertical planar region in the settling column, while the motions of particles were recorded by a high speed charge-coupled device (CCD) camera. This technique was able to capture the trajectories of the tracers when a diatom aggregate settled through the tracer suspension. The PIV results indicated directly the curvilinear feature of the streamlines around diatom aggregates. The rectilinear collision model largely overestimated the collision areas of the settling particles. Algae aggregates appeared to be highly porous and fractal, which allowed streamlines to penetrate into the aggregate interior. The diatom aggregates have a fluid collection efficiency of 10%-40%. The permeable feature of aggregates can significantly enhance the collisions and flocculation between the aggregates and other small particles including algal cells in water.