PCB企业退焊锡废液治理再生研究

该文提出用巯基沉淀剂来沉淀硝酸型退铅锡废水中的重金属离子(Cu,Fe,Pb,Sn),实验结果表明,适宜的沉淀条件为:在搅拌下将巯基沉淀剂P按理论量加入,同时按每升废液通入还原性添加剂二氧化硫12 g和3～5 mL,1%(W/W)PAM(分子量为400 000)絮凝剂,沉淀过滤后其退锡速度和退锡容量等性能与原退锡液无异,该工艺可使PCB企业的退铅锡废水实现循环使用。      

固体微粒气溶胶灭火剂的改性研究

固体微粒气溶胶灭火剂作为一种新型灭火剂具有优越的抑制火灾的性能,但其应用和推广的关键在于降低灭火气溶胶形成时的温度.本文利用TG方法分析了灭火剂的热分解过程,并通过测定固体微粒气溶胶灭火剂的释放速度、释放区温度分布及灭火性能,研究了固体微粒气溶胶灭火剂的降温消焰技术.同时对气溶胶的成分和固体粒子粒度分布进行了分析.     

从萘系高效减水剂中分离硫酸钠的清洁工艺

对萘系高效减水剂中硫酸钠的分离提出了一种用有机醇作为促析剂的分离工艺,在较高温度和较高的水剂总浓度下,按水剂质量的３０％加入促析剂,可使粉剂中硫酸钠的质量分数降至３％以下,促析剂可回收利用。该工艺无三废排放,工艺简单,可望取代传统的脱硫酸钙法。     

中原油田污水处理新技术

中原油田污水处理所用处理剂导致高成本、高污泥量,研制利用新药剂替代原用药剂。实验结果表明：新药剂成本低,产生的污泥量少,水质稳定性强,处理后的水完全达到回注水的水质要求。     

重金属废物稳定化处理技术现状及发展

本文在综述重金属废物的处理技术现状的基础上 ,重点论述了重金属危险废物的药剂稳定化机理和方法 ,提出重金属螯合剂在重金属污染治理中将发挥重要作用。     

一种新型复合混凝剂处理餐饮废水的实验研究

介绍了一种利用自制混凝剂处理餐饮废水的方法。对处理工艺进行了优化,处理了100mL餐饮废水,投加5％的混凝剂1．5mL,搅拌强度90－120r/min,时间60－90s,沉淀时间20min。该方法工艺流程简单,运行成本低,不受温度限制,操作管理容易,CODCr去除率达90％以上,为使餐饮废水成为可再利用资源开辟了一条途径。     

硝酸锶(钡)降低气溶胶灭火剂腐蚀性研究

研究了添加硝酸锶(钡)降低气溶胶灭火剂腐蚀性的作用,通过测试气溶胶灭火剂固体产物颗粒的生成量、吸湿性和酸碱性,分析了影响气溶胶灭火剂对金属材料腐蚀性的因素,并考察了改性配方灭火性能的变化。     

接触絮凝-氧化法处理活性染料废水

将接触絮凝工艺应用于活性染料废水的处理,具有处理效果好、产泥量少、处理费用低等特点。经接触絮凝工艺后,废水的CODCr由3639mgL降低到1463mgL;再经H2O2Fe2+氧化法处理,CODCr进一步降低到220mgL,色度去除率达到98%以上,基本达到排放要求。     

餐饮废水的化学处理方法研究

以聚硅酸铝为混凝剂,用化学法絮凝处理餐饮废水。考查了酸度、混凝剂加入量、搅拌速度、搅拌时间、沉降时间对CODCr去除率的影响。结果表明酸度在pH9～11范围内,每100mL污水中聚硅酸铝加入量为02mL,搅拌速度为45r/min,搅拌15s,沉降15min后,测上清液的化学耗氧量,CODCr去除率可达88%左右。该方法效果好、工艺简单、易于操作管理,有实际应用价值。     

Influence of the composition of the initial mixtures on the chemical composition,physicochemical properties and humic-like substances content of composts

The influence of the proportion of C- and N-rich raw materials (initial C/N ratio) and bulking agent on the chemical functional groups composition, humic-like substances (HS-like) content and physicochemical properties of composts was assessed. To achieve these goals, seven initial mixtures (BA1–6 and C1) of dog food (N-rich raw material) were composted with wheat flour (C-rich raw material). Composts were analyzed in terms of chemical functional groups, physicochemical, maturity and stability parameters.The C-rich raw material favored the formation of oxidized organic matter (OM) during the composting process, as suggested by the variation of the ratios of the peaks intensity of FT-IR spectra, corresponding to a decrease of the polysaccharides and an increase of aromatic and carboxyl-containing compounds. However, although with high proportion of C-rich raw material, mixtures with low initial C/N seems to have favored the accumulation of partially oxidized OM, which may have contributed to high electrical conductivity values in the final composts. Therefore, although favoring the partial transformation of OM into stabilized HS-like, initial mixtures with high proportion of C-rich raw material but with low initial C/N led to unstable composts.On the other hand, as long as a high percentage of bulking agent was used to promote the structure of biomass and consequently improve of the aeration conditions, low initial C/N was not a limiting factor of OM oxidation into extractable stabilized humic-like acids.