公交车燃用生物柴油的颗粒物水溶性离子排放

以一辆国Ⅴ柴油公交车为研究对象,在重型底盘测功机上运行中国典型城市公交循环,试验研究了柴油（D100）,体积混合比例分别为5%（B5）、10%（B10）和20%（B20）的废食用油制生物柴油-柴油混合燃料的尾气颗粒物水溶性离子（Water soluble ions,WSI）排放特性.结果表明：国Ⅴ柴油公交车尾气颗粒物呈弱酸性;WSI约占颗粒物质量的3%,主要集中在PM_0.5~2.5和PM_2.5~18粒径段,阴离子占WSI总量的72%~79%;废食用油制生物柴油对公交车尾气颗粒WSI种类没有影响;随着废食用油制生物柴油混合比例的增加,公交车尾气颗粒物WSI阴、阳离子浓度、颗粒物酸性整体增大,WSI浓度峰值向小粒径段移动;CaCl₂和NaCl可能是柴油公交车尾气颗粒物Cl^-、Ca²⁺、Na⁺的主要存在形式;控制废食用油制生物柴油硫、Na⁺、Ca²⁺和Cl^-含量,优化缸内燃烧减少NO_x排放,对降低柴油公交车尾气颗粒物WSI排放具有重要意义.     

某四组元复合推进剂的热分解规律研究

目的研究某四组元推进剂的热分解特性。方法进行差示扫描量热(DSC)和热重分析(TG)实验。结果分别得到了推进剂在不同温度下的DSC和TG曲线,以及同一温度下推进剂各单组分的DSC和TG曲线,并计算得到了不同升温速率下的反应动力学参数。结论推进剂的热失重主要分为三个阶段,150～220℃的范围主要为RDX的热分解,220～375℃的范围主要为AP热分解,375～515℃的范围主要为部分AP高温分解和橡胶分解。同时推进剂在200～237℃和337～385℃各出现了一个放热峰,在240～248℃出一个吸热峰。推进剂的吸热峰为推进剂中AP晶型转变的吸热峰,推进剂中两个放热峰分别是由于RDX热分解和AP的高温分解产生的。同时计算得到推进剂样品的活化能,推进剂的表观活化能在1.6×10~5～2.1×10~5J/mol的范围之间,随着热分解的进行,活化能先降低后升高。     

一种考虑环境因素的自动步枪可靠性分析方法

目的 分析环境因素对于自动步枪系统可靠性的影响。方法 首先介绍贝叶斯网络理论,然后将自动步枪系统可靠性建模划分为刚性抛壳机构和弹匣供弹机构两大模块。在此基础上,从设计制造、使用因素和环境因素3个方面进行故障树建模。将故障树转化为贝叶斯模型后,基于给出的底事件失效概率和引入的环境影响因子,计算考虑环境因素带来的共因失效效应时自动步枪系统的可靠度。结果 从系统层面来看,环境因素的影响会使系统的可靠度下降8.1%。结论 在进行自动步枪的系统可靠性分析时,考虑由环境因素带来的共因失效效应更为符合实际情况,不考虑共因失效效应时,往往会高估子系统的可靠度。     

Impact of litter removal on soil characteristics under a Pinus caribaea stand

ABSTRACT

Forest productivity is dependent on soil quality, which in turn is related to litter; yet there is limited understanding of the relationships between litter and soil quality. The effects of litter removal treatment on tree growth and soil properties were examined in a Pinus caribaea stand with the aim of providing an understanding of consequences of litter removal on soil patterns. This knowledge is important for planning appropriate long-term forest management. Three pairs of 30 × 30 m² plots (each pair a control and treatment) were established in the center of a P. caribaea stand in April 2002. The controls were left undisturbed with an intact litter layer, while litter was removed monthly from treated plots. The diameter and height of the P. caribaea decreased and soil quality was degraded over the experimental period in litter-removed (treated) plots. Litter removal also produced a significant increase in soil bulk density at 0–20 and 20–40 cm depths. The capillary porosity, capillary moisture capacity, and natural water content in controls at 0–20 and 20–40 cm depths were significantly greater than treated plots. The non-capillary porosity in controls at the 0–20 cm depth was also significantly higher than treated plots. The organic carbon, total nitrogen (N), total potassium (K) and alkalized N content in each layer, and available P and exchangeable K at 0–20 and 40–60 cm depths in control plots were significantly greater than litter-removed plots. The numbers of bacteria at 0–20 and 40–60 cm depths and of fungi at 20–40 and 40–60 cm depths were higher in control than treated plots. The number of actinomyces and urease, catalase, and acid phosphatase activities in controls at each depth were significantly greater than litter-removed plots.     

灞河河道疏浚底泥固化力学特性试验研究

为将灞河右岸岸坡综合治理工程中清除的河道疏浚底泥用作滨河沙坑回填处理材料,选用水泥、高分子吸水树脂(SAP)和三乙醇胺(TEA)对河道疏浚底泥进行固化改性处理,并对不同养护龄期的固化底泥进行了室内直剪试验和固结试验,探讨了固化底泥的强度与变形特征.结果 表明:固化底泥的峰值抗剪强度随着水泥掺量的增加而增大,水泥与0.5...     

产碱杆菌DN25中降氰酶的分离纯化及生化特性

以一株可降氰的产碱杆菌DN25为酶来源,通过超滤、30 mg/mL硫酸鱼精蛋白沉淀、30%～70%硫酸铵盐析和Phenyl-Toyopearl 650M疏水层析等步骤,获得比活力为44 U/mg的纯化酶制剂.在确定酶浓度、反应时间等氰降解活力测定条件后开展酶学性质研究,试图为将来氰降解代谢机理的深入研究和菌株的基因工程改造提供理论基础.研究结果表明,此纯化酶催化氰化物水解的最适pH值为8.0,最适温度为30℃.该酶在pH 7.0～8.0区域稳定,而在pH>9时会很快失活;在30℃保存10 h,酶活力保持稳定,高于60℃,酶快速失活.加入甘氨酸稳定剂,在60℃下保存20 min酶活仍可保留19.6%.酶促反应动力学符合米氏双曲线方程,测得米氏常数Km为3.11 mmol/L,最大反应速率Vmax为0.23 mmolL-1min-1.     

碳氟碳氢表面活性剂表面活性及灭火性能

对全氟辛基磺酰基季铵碘化物(FC-203)和十二烷基苯磺酸纳(SDBS)混合溶液的表面张力、起泡能力及其灭火性能进行了试验研究.结果表明,FC-203与SDBS复配对于提高溶液的表面活性具有明显的协同效应,混合溶液只有在同时具备低表面张力和较强起泡能力条件下才表现出较好的灭火性能.对于浓度为5 mmol/L的混合溶液,当FC-203与SDBS的物质的量比为1∶2时,其灭火时间可降低至6.9 s.研究结果对于碳氟碳氢表面活性剂在灭火剂中的应用具有一定的意义.     

Identification of Bacillus methylotrophicus and its application in preventing fly maggot production in the environment北大核心CSCD

This research aimed to screen Bacillus spp. to prevent the production of fly maggot on kitchen wastes from soil in the experimental bases of the South China Agricultural University. A nutrient-rich medium was used to isolate the Bacillus spp. with high temperature treatment. The seventeen Bacillus strains were obtained and assigned to three groups by using Insertion Sequence based PCR (IS-PCR) DNA fingerprinting patterns. The homology of the 16S rDNA gene was 100% between Group I and Bacillus methylotrophicus CBMB 205T, 99.61% between Group II and Bacillus aerophilus 28KT, and 99.87% between Group III and Bacillus cereus ATCC 14579T. The results of kitchen waste tests proved that the representative bacteria of Group I RF2 had the ability to prevent fly maggot production on kitchen wastes. Furthermore, the results of physiological and biochemical tests, carbon utilization tests, and antagonists against plant pathogen tests showed that the bacteria from Group I RF2 had the ability to decompose glucose into pyruvate and then decarboxylate pyruvate to diacetyl under alkaline conditions, convert ammonia to intracellular amino acids or other kinds of nitrogenous compounds, use many kinds of carbon source for self-growth, and be antagonistic against plant pathogenic rice sheath blight disease, banana fusarium wilt, and Fusarium oxysporum. Besides, the bacteria from RF2 could secret organic acids to dissolve insoluble phosphate [Ca3(PO4)2] for its own growth by decreasing the pH. Group I RF2 was a strong plant-promotion bacterium, and had good prospects of application for preventing fly maggot production on kitchen wastes. © 2018 Science Press. All rights reserved.     

Predicting self-evacuation in Australian bushfire

Australian bushfire safety policy does not require mandatory evacuation from bushfire as practiced in North America and other jurisdictions. Australian householders confronted with a bushfire threat must decide whether they remain and defend their property or evacuate. A better understanding of factors that influence householders’ decisions to self-evacuate can inform bushfire safety policy. Studies have identified variables that motivate evacuation from various hazards, including wildfire, but factors shaping the decision processes are not well understood. The Protective Action Decision Model (PADM) provided a theoretical framework of factors influencing protective response to hazard to analyse the actions of householders affected by two bushfires. Three factors that predict self-evacuation were identified: the perception that evacuation is effective in protecting personal safety; the receipt of official warnings; and perceived threat to property. These findings reinforce the importance of increasing householder awareness and sensitivity to the danger posed by bushfire; the adequacy of people’s bushfire preparedness; the effectiveness of early evacuation in protecting personal safety; and the potential persuasiveness of accurate, relevant and timely official warning messages in influencing safe evacuation from bushfire.     

Aggravation of membrane fouling and methane leakage by a three-phase separator in an external anaerobic ceramic membrane bioreactor

The existence of three-phase separator did not affect COD removal in the EAnCMBR. The existence of three-phase separator aggravated methane leakage of EAnCMBR. The existence of three-phase separator aggravated membrane fouling rate of EAnCMBR. Start-up of EAnCMBR equipped three-phase separator was slightly delayed. The three-phase separator is a critical component of high-rate anaerobic bioreactors due to its significant contribution in separation of biomass, wastewater, and biogas. However, its role in an anaerobic membrane bioreactor is still not clear. In this study, the distinction between an external anaerobic ceramic membrane bioreactor (EAnCMBR) unequipped (R1) and equipped (R2) with a three-phase separator was investigated in terms of treatment performance, membrane fouling, extracellular polymers of sludge, and microbial community structure. The results indicate that the COD removal efficiencies of R1 and R2 were 98.2%±0.4% and 98.1%±0.4%, respectively, but the start-up period of R2 was slightly delayed. Moreover, the membrane fouling rate of R2 (0.4 kPa/d) was higher than that of R1 (0.2 kPa/d). Interestingly, the methane leakage from R2 (0.1 L/d) was 20 times higher than that from R1 (0.005 L/d). The results demonstrate that the three-phase separator aggravated the membrane fouling rate and methane leakage in the EAnCMBR. Therefore, this study provides a novel perspective on the effects of a three-phase separator in an EAnCMBR.