Multimedia fate modeling and comparative impact on freshwater ecosystems of pharmaceuticals from biosolids-amended soils

This study modeled the impact on freshwater ecosystems of pharmaceuticals detected in biosolids following application on agricultural soils. The detected sulfonamides and hydrochlorothiazide displayed comparatively moderate retention in solid matrices and, therefore, higher transfer fractions from biosolids to the freshwater compartment. However, the residence times of these pharmaceuticals in freshwater were estimated to be short due to abiotic degradation processes. The non-steroidal anti-inflammatory mefenamic acid had the highest environmental impact on aquatic ecosystems and warrants further investigation. The estimation of the solid-water partitioning coefficient was generally the most influential parameter of the probabilistic comparative impact assessment. These results and the modeling approach used in this study serve to prioritize pharmaceuticals in the research effort to assess the risks and the environmental impacts on aquatic biota of these emerging pollutants.     

宁夏地区光伏发电环境效益分析及建模

在阐述了宁夏地区光伏发电发展的优势及发展现状的基础上,分析了光伏发电开发利用对宁夏生态环境产生的积极和消极的影响,并为降低消极影响提出了相应的对策;为了定量直观的评估光伏发电积极影响和消极影响所产生的环境效益,分别建立了节能减排、防风固沙和土地增值、景观效应、植被恢复费用、噪声污染超标罚款、光污染费用等价值模型及光伏发电总的生态环境效益价值模型;最后以中电投宁夏能源铝中卫香山光伏电站为例进行计算验证,结果表明模型的合理性和准确性,同时光伏电站的节能减排效益显著。相对于传统的火力发电,表现了优越的环境效益。     

美国地震风险评估中灾害模型的探讨

介绍了以美国地震灾害模型为例的地震风险评估在金融保险业和土木工程两大领域的应用,回顾了地震灾害风险评估发展的历史背景,其中,金融保险业的模型更测重于对历史理赔数据的分析,土木工程业的模型则注重于对工程结构的分析。着重探讨了评估模型中地震灾害部分的建立,其中包括致灾因子模块及孕灾环境模块。针对建模中致灾因子、孕灾环境等的关键要素,如地震源及震级、地震衰减方式、场地土壤土质条件、地震复发率等,作了分析及归纳总结,并系统地介绍了所涉及要素的数据信息获取过程及对应的建模方法,进一步探讨了相应的风险量化的步骤和方法。     

Inhalation dose assessment of indoor radon progeny using biokinetic and dosimetric modeling and its application to Jordanian population

High indoor radon concentrations in Jordan result in internal exposures of the residents due to the inhalation of radon and its short-lived progeny. It is therefore important to quantify the annual effective dose and further the radiation risk to the radon exposure. This study describes the methodology and the biokinetic and dosimetric models used for calculation of the inhalation doses exposed to radon progeny. The regional depositions of aerosol particles in the human respiratory tract were firstly calculated. For the attached progeny, the activity median aerodynamic diameters of 50 nm, 230 nm and 2500 nm were chosen to represent the nucleation, accumulation and coarse modes of the aerosol particles, respectively. For the unattached progeny, the activity median thermodynamic diameter of 1 nm was chosen to represent the free progeny nuclide in the room air. The biokinetic models developed by the International Commission on Radiological Protection (ICRP) were used to calculate the nuclear transformations of radon progeny in the human body, and then the dosimetric model was applied to estimate the organ equivalent doses and the effective doses with the specific effective energies derived from the mathematical anthropomorphic phantoms. The dose conversion coefficient estimated in this study was 15 mSv WLM⁻¹ which was in the range of the values of 6-20 mSv WLM⁻¹ reported by other investigators. Implementing the average indoor radon concentration in Jordan, the annual effective doses were calculated to be 4.1 mSv y⁻¹ and 0.08 mSv y⁻¹ due to the inhalation of radon progeny and radon gas, respectively. The total annual effective dose estimated for Jordanian population was 4.2 mSv y⁻¹. This high annual effective dose calculated by the dosimetric approach using ICRP biokinetic and dosimetric models resulted in an increase of a factor of two in comparison to the value by epidemiological study. This phenomenon was presented by the ICRP in its new published statement on radon.     

Multi-response optimization of Fenton process for applicability assessment in landfill leachate treatment

Fenton process, as a pretreatment method, was found to be effective in the primary treatment of mature/medium landfill leachate. However, the main problem of the process is the large amount of produced sludge that requires an accurate feasibility evaluation for operational applications. In this study, the response surface methodology was applied for the modeling and optimization of Fenton process in three target responses, (1) overall COD removal, (2) sludge to iron ratio (SIR) and (3) organics removal to sludge ratio (ORSR), where the latter two were new self-defined responses for prediction of sludge generation and applicability assessment of the process, respectively. The effective variables included the initial pH, [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage. According to the statistical analysis, all the proposed models were adequate (with adjusted R² of 0.9116–0.9512) and had considerable predictive capability (with prediction R² up to 0.9092 and appropriate adequate precision). It was found that all the variables had significant effects on the responses, specifically by their observed role in dominant oxidation mechanism. The optimum operational conditions obtained by overlay plot, were found to be initial pH of 5.7, [H₂O₂]/[Fe²⁺] ratio of 17.72 and [Fe²⁺] of 195 mM, which led to 69% COD removal, 2.4 (l sludge/consumed mole Fe²⁺) of SIR and 16.5 (gCOD removed/l produced sludge) for ORSR in verification test, in accordance with models-predicted values. Finally, it was observed that [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage had significant influence on COD removal, while Fe²⁺ dosage and [H₂O₂]/[Fe²⁺] ratio had remarkable effects on SIR and ORSR responses, respectively.     

SACRAMENTO RIVER FLOW RECONSTRUCTED TO A.D. 869 FROM TREE RINGS1

ABSTRACT: A time series of annual flow of the Sacramento River, California, is reconstructed to A.D. 869 from tree rings for a long‐term perspective on hydrologic drought. Reconstructions derived by principal components regression of flow on time‐varying subsets of tree‐ring chronologies account for 64 to 81 percent of the flow variance in the 1906 to 1977 calibration period. A Monte Carlo analysis of reconstructed n‐year running means indicates that the gaged record contains examples of drought extremes for averaging periods of perhaps = 6 to 10 years, but not for longer and shorter averaging periods. For example, the estimated probability approaches 1.0 that the flow in A.D. 1580 was lower than the lowest single‐year gaged flow. The tree‐ring record also suggests that persistently high or low flows over 50‐year periods characterize some parts of the long‐term flow history. The results should contribute to sensible water resources planning for the Sacramento Basin and to the methodology of incorporating tree‐ring data in the assessment of the probability of hydrologic drought.     

Implications of simultaneity in a physical damage function

A modeler must often rely on highly simplified representations of complex physical systems when analyzing associated economic issues. Herein, we consider a management problem in which a bioeconomic system exhibits simultaneity in processes governing productivity and damage. In this case, it may benefit the producer to sacrifice productivity to reduce the costs associated with increased damage. We specify empirically a structural damage relationship that explains the biological process by which an invasive species damages a host and estimate the structural model and its reduced form with an exceptional dataset on infestation of olives by the olive fruit fly. We contrast the results of these models with the approach typically taken in the economic literature, which expresses damage as a function of pest density. The population-based approach introduces significantly greater bias into the individual grower's choice of damage-control inputs than estimates based on the structural model.     

Characterizing sources of nitrate leaching from an irrigated dairy farm in Merced County, California

Dairy farms comprise a complex landscape of groundwater pollution sources. The objective of our work is to develop a method to quantify nitrate leaching to shallow groundwater from different management units at dairy farms. Total nitrate loads are determined by the sequential calibration of a sub-regional scale and a farm-scale three-dimensional groundwater flow and transport model using observations at different spatial scales. These observations include local measurements of groundwater heads and nitrate concentrations in an extensive monitoring well network, providing data at a scale of a few meters and measurements of discharge rates and nitrate concentrations in a tile-drain network, providing data integrated across multiple farms. The various measurement scales are different from the spatial scales of the calibration parameters, which are the recharge and nitrogen leaching rates from individual management units. The calibration procedure offers a conceptual framework for using field measurements at different spatial scales to estimate recharge N concentrations at the management unit scale. It provides a map of spatially varying dairy farming impact on groundwater nitrogen. The method is applied to a dairy farm located in a relatively vulnerable hydrogeologic region in California. Potential sources within the dairy farm are divided into three categories, representing different manure management units: animal exercise yards and feeding areas (corrals), liquid manure holding ponds, and manure irrigated forage fields. Estimated average nitrogen leaching is 872 kg/ha/year, 807 kg/ha/year and 486 kg/ha/year for corrals, ponds and fields respectively. Results are applied to evaluate the accuracy of nitrogen mass balances often used by regulatory agencies to assess groundwater impacts. Calibrated leaching rates compare favorably to field and farm scale nitrogen mass balances. These data and interpretations provide a basis for developing improved management strategies.     

GIS网络服务区分析在重庆市主城区夜间施工噪声投诉处置中应用

通过对重庆市主城区夜间施工噪声投诉处置现状分析,以主城区道路交通网络、环境监察机构分布等数据专题建模,采用G IS的网络服务区功能的分析结果,提出车辆调度合理化建议方案,为环境监察部门的夜间施工噪声投诉处置车辆部署调度提供辅助技术支持。     

APPLICATION OF A SEDIMENT ROUTING MODEL TO A MIDDLE EUROPEAN WATERSHED1

ABSTRACT: A simulation model that computes sediment yield due to sheet and rill erosion at the outlet of a large watershed requires daily precipitation and the soil, topographic, and vegetative characteristics of the watershed. An important problem, particularly in a large watershed, is the transport of sediment produced in the sub-watersheds to the outlet of the whole watershed. This problem is approached mathematically by a sediment routing model that is used as a component of the total model.