WATER QUALITY SIMULATION AND PUBLIC LAW 92–500 Case Study: Southwestern Illinois1

ABSTRACT: Section 208 of the Federal Water Pollution Control Act Amendments of 1972 has provided the Southwestern Illinois Metropolitan and Regional Planning Commission (SIMAPC) with a unique opportunity for comprehensive planning of the region's water quality. SIMAPC initiated the 208 study by researching available technology for the analysis of point and nonpoint sources of pollution and establishing criteria by which to judge the various technniques. This led to SIMAPC'S choice of continuous simulation of stream and reservoir water quality as the most appropriate analytical tool for their needs. A continuous simulation model was calibrated and verified on three basins in the SIMPAC region. It was then used to produce load source analysis, pollution event frequency analysis, and pollution event duration analysis for ten pollutants under existing stream conditions and then under alternative future conditions. These results enabled the weighting of pollutant sources, analysis of the effectiveness of control measures, and quantitative analysis of the marginal benefit of each alternative.     

INTERDISCIPLINARY MODELING IN THE ANALYSIS OF THE SALINITY PROBLEMS OF THE SAFFORD VALLEY1

ABSTRACT: A groundwater quality change of +0.13 millimhos electrical conductivity was documented between 1940 and 1 972 in the Safford Valley. The change is attributable to four principal mechanisms: pumping-encouraged saline artesian aquifer leakage, natural recharge of the water table aquifer by saline waters, leaching of agricultural waters into the aquifer and the lateral flow of groundwater through saline lacustrine beds. A hydrologic study of the area has shown the first of these mechanisms to be predominant. Salinity modeling has shown three regions of salinity change, and salinity increase projections for each are determined. An economic analysis and an economic model are then combined with the physical model, yielding information as to when certain economic conditions are reached with respect to the salinity increase. This combined model shows that, based on projected salinity trends, cotton, the principal agricultural crop of the valley, will remain economical to cultivate for a significant time beyond the model's limit of prediction. Alfalfa, on the other hand, should go out of production in large areas of the valley by 1990, and not be under economical cultivation by 2040. A sociologic model, based on the cluster analysis of questionnaire data, shows an awareness of the salinity problems of the area but little concern over them. Interdisciplinary model based salinity control regulations are made.     

NUMERICAL MODEL OF A TRACER TEST ON THE SANTA CLARA RWER,VENTURA COUNTY,CALIFORNIA1

ABSTRACT: To better understand the flow processes, solute-trans. port processes, and ground-water/surface-water interactions on the Santa Clara River in Ventura County, California, a 24-hour fluorescent-dye tracer study was performed under steady-state flow conditions on a 45-km reach of the river. The study reach includes perennial (uppermost and lowermost) subreaches and ephemeral subreaches of the lower Piru Creek and the middle Santa Clara River. The tracer-test data were used to calibrate a one-dimensional flow model (DAFLOW) and a solute-transport model (BLTM). The dye-arrival times at each sample location were simulated by calibrating the velocity parameters in DAFLOW. The simulations of dye transport indicated that (1) ground-water recharge explains the loss of mass in the ephemeral middle subreaches, and (2) ground-water recharge does not explain the loss of mass in the perennial uppermost and lowermost subreaches. The observed tracer curves in the perennial subreaches were indicative of sorptive dye losses, transient storage, and (or) photodecay - these phenomena were simulated using a linear decay term. However, analysis of the linear decay terms indicated that photodecay was not a dominant source of dye loss.     

Planning rural water services in Nicaragua: A systems-based analysis of impact factors using graphical modeling

The success or failure of rural water services in the developing world is a result of numerous factors that interact in a complex set of connections that are difficult to separate and identify. This research effort presented a novel means to empirically reveal the systemic interactions of factors that influence rural water service sustainability in the municipalities of Darío and Terrabona, Nicaragua. To accomplish this, the study employed graphical modeling to build and analyze factor networks. Influential factors were first identified by qualitatively and quantitatively analyzing transcribed interviews from community water committee members. Factor influences were then inferred by graphical modeling to create factor network diagrams that revealed the direct and indirect interaction of factors. Finally, network analysis measures were used to identify “impact factors” based on their relative influence within each factor network. Findings from this study elucidated the systematic nature of such factor interactions in both Darío and Terrabona, and highlighted key areas for programmatic impact on water service sustainability for both municipalities. Specifically, in Darío, the impact areas related to the current importance of water service management by community water committees, while in Terrabona, the impact areas related to the current importance of finances, viable water sources, and community capacity building by external support. Overall, this study presents a rigorous and useful means to identify impact factors as a way to facilitate the thoughtful planning and evaluation of sustainable rural water services in Nicaragua and beyond.     

Impacts of agri-environmental policy on land use and nitrogen leaching in Finland

Agri-environmental policies are challenging to be evaluated since they are often implemented in combination with other policies and regulations affecting agriculture. Also input and output markets affect agriculture. We provide impact assessment of agri-environmental scheme implemented in Finland 2007–2013 based on integrated economic and hydrological modelling and counterfactual scenarios. Development of crop specific fertilisation and land use changes, simulated using a multi-regional economic sector model, is included in a nutrient leaching model implemented in a typical agricultural region. Our results on agricultural production, land use, and nitrogen leaching show that the agri-environmental policy successfully mitigates nutrient leaching in intensive production regions but some mitigation potential is lost in less intensive regions.     

基于随机模拟的地下水污染物最优水力截获量

水力截获技术是净化或抑制地下水污染最为广泛使用的一种方法，而该技术实施过程中，如何确定最优水力截获量是其需要重点解决的关键问题.本文针对传统确定性方法计算最优水力截获量不合理的问题，从水文地质参数的随机性出发，应用基于随机理论的蒙特卡罗方法，通过实例来研究渗透系数的空间变异性对地下水污染物水力截获系统的影响，并寻求估算最优水力截获量的新方法.通过研究表明：基于确定性方法计算出最优水力截获量为110m³/d时恰好能完全截获污染区的污染物；应用随机模拟研究含水层渗透系数的空间变异性对水力截获系统的影响，发现当以传统确定性方法所计算的最优水力截获量（110m³/d）抽水时，并不能总是完全截获地下水污染物，其面临的稳定平均风险率高达24%；充分考虑了含水层渗透系数空间变异的Monte Carlo方法较以往传统确定性方法更为可靠，为此本文提出利用随机方法从截获系统可接受风险角度确定最优截获量的新思路.     

Development and Validation of the Total HUman Model for Safety (THUMS) Toward Further Understanding of Occupant Injury Mechanisms in Precrash and During Crash

Objective: Active safety devices such as automatic emergency brake (AEB) and precrash seat belt have the potential to accomplish further reduction in the number of the fatalities due to automotive accidents. However, their effectiveness should be investigated by more accurate estimations of their interaction with human bodies. Computational human body models are suitable for investigation, especially considering muscular tone effects on occupant motions and injury outcomes. However, the conventional modeling approaches such as multibody models and detailed finite element (FE) models have advantages and disadvantages in computational costs and injury predictions considering muscular tone effects. The objective of this study is to develop and validate a human body FE model with whole body muscles, which can be used for the detailed investigation of interaction between human bodies and vehicular structures including some safety devices precrash and during a crash with relatively low computational costs.

Methods: In this study, we developed a human body FE model called THUMS (Total HUman Model for Safety) with a body size of 50th percentile adult male (AM50) and a sitting posture. The model has anatomical structures of bones, ligaments, muscles, brain, and internal organs. The total number of elements is 281,260, which would realize relatively low computational costs. Deformable material models were assigned to all body parts. The muscle–tendon complexes were modeled by truss elements with Hill-type muscle material and seat belt elements with tension-only material. The THUMS was validated against 35 series of cadaver or volunteer test data on frontal, lateral, and rear impacts. Model validations for 15 series of cadaver test data associated with frontal impacts are presented in this article. The THUMS with a vehicle sled model was applied to investigate effects of muscle activations on occupant kinematics and injury outcomes in specific frontal impact situations with AEB.

Results and Conclusions: In the validations using 5 series of cadaver test data, force–time curves predicted by the THUMS were quantitatively evaluated using correlation and analysis (CORA), which showed good or acceptable agreement with cadaver test data in most cases. The investigation of muscular effects showed that muscle activation levels and timing had significant effects on occupant kinematics and injury outcomes. Although further studies on accident injury reconstruction are needed, the THUMS has the potential for predictions of occupant kinematics and injury outcomes considering muscular tone effects with relatively low computational costs.     

The Contribution of Pre-impact Posture on Restrained Occupant Finite Element Model Response in Frontal Impact

Objective: The objective of this study was to discuss the influence of the pre-impact posture to the response of a finite element human body model (HBM) in frontal impacts.

Methods: This study uses previously published cadaveric tests (PMHS), which measured six realistic pre-impact postures. Seven postured models were created from the THUMS occupant model (v4.0): one matching the standard UMTRI driving posture as it was the target posture in the experiments, and six matching the measured pre-impact postures. The same measurements as those obtained during the cadaveric tests were calculated from the simulations, and biofidelity metrics based on signals correlation (CORA) were established to compare the response of the seven models to the experiments.

Results: The HBM responses showed good agreement with the PMHS responses for the reaction forces (CORA = 0.80 ± 0.05) and the kinematics of the lower part of the torso but only fair correlation was found with the head, the upper spine, rib strains (CORA= 0.50 ± 0.05) and chest deflections (CORA = 0.67 ± 0.08). All models sustained rib fractures, sternal fracture and clavicle fracture. The average number of rib fractures for all the models was 5.3 ± 1.0, lower than in the experiments (10.8 ± 9.0).

Variation in pre-impact posture greatly altered the time histories of the reaction forces, deflections and the rib strains, mainly in terms of time delay, but no definite improvement in HBM response or injury prediction was observed. By modifying only the posture of the HBM, the variability in the impact response was found to be equivalent to that observed in the experiments. The postured HBM sustained from 4 to 8 rib fractures, confirming that the pre-impact posture influenced the injury outcome predicted by the simulation.

Conclusions: This study tries to answer an important question: what is the effect of occupant posture on kinematics and kinetics. Significant differences in kinematics observed between HBM and PMHS suggesting more coupling between the pelvis and the spine for the models which makes the model response very sensitive to any variation in the spine posture. Consequently, the findings observed for the HBM cannot be extended to PMHS. Besides, pre-impact posture should be carefully quantified during experiments and the evaluation of HBM should take into account the variation in the predicted impact response due to the variation in the model posture.     

A new approach to determine relieving temperature and thermodynamic behavior of trapped single and multi-phase fluid exposed to fire

Process safety plays a key role in modern industries. This is more significant specifically in off-shore oil and gas platforms where releasing hydrocarbons could cause irreversible damages to both environment and personnel. An important instrument device which can provide safety for process equipment in oil and gas fields is safety relief valve. Correct sizing procedure of such devices depends strongly on physical properties of fluid and relieving condition. The present study revolved around applying thermodynamic concepts and modeling to throw some light on the behavior of trapped fluid exposed to fire in order to evaluate precise temperature and fluid properties at relieving condition. Peng–Robinson equation of state together with a three phase flash has been utilized to handle the calculation. Effect of different design parameters has been evaluated for three distinct categories of fluids namely natural gas, gas-condensate mixture, and gas-oil mixtures. These parameters encompass of operating temperature, operating pressure, Difference of Operating and Design Pressure, gas and oil specific gravities, gas-oil ratio, and water cut. The study depicted that American Petroleum Institute practice number 521 which suggests an ideal gas assumption fails to provide reliable predictions as it significantly overestimate the relieving temperature. Moreover, black oil correlations were also used for the relief temperature estimation of gas-oil-water mixtures. Comparison with HYSYS results as a prominent engineering software proved that black oil models are reliable tools to predict relief temperature.