Metal levels in computer monitor components discarded in the vicinities of electronic workshops

Levels of Pb, Ni, Cr, Cu, Zn, and Cd in the glass screens (GS) and printed wiring boards (PWBs) of obsolete computer monitors (OCMs) were determined by flame atomic absorption spectrophotometry (FAAS) following standard digestion. Metal concentrations (mg kg^?1) in GS were in the following ranges (medians in brackets): Pb ND – 3100 (46), Cd 0.5–2.6 (0.8), Cr ND – 18.7 (3.1), and Zn 8.1–600 (37) and in PWBs (mg kg^?1): Pb 34,600 ± 17,000, Cd 11 ± 9, Cr 59 ± 45, Zn 15,900 ± 7800, Cu79,000 ± 22,600, and Ni 3200 ± 2500. In GS, the levels of the six metals were lower than their total threshold limit concentrations (TTLC), except for Pb with a TTLC of 1000 mg kg^?1 in 10% of the samples. In the PWBs, the TTLC of Pb and Cu (2500 mg kg^?1) was exceeded many fold. For Zn (5000 mg kg^?1) and Ni (2000 mg kg^?1); they were exceeded by 90% and 65%, respectively. For OCMs manufactured in 2001 and later, Pb and Zn levels in GS and Cr, Zn, and Ni in PWBs were significantly reduced.     

全球沙尘气溶胶源汇分布及其变化特征的模拟分析

根据全球沙尘气溶胶气候模式GEM-AQ/EC模拟的1995~2004年的沙尘起沙量和干湿沉降量,分析了沙尘气溶胶源汇的全球时空变化特征.全球沙尘起沙量集中在各个主要沙漠地区,北非对全球沙尘气溶胶贡献最大为66.6%.沙尘气溶胶沉降的高值区分布在沙漠源区及其紧临的下风地区.最大净沙尘气溶胶接收主要分布在沙漠周围地区并形成净接收量大于10t/(km2×a)的位于0°N~60°N之间的北非、欧亚大陆、西太平洋、北印度洋、北美和大西洋的带状分布.在北非、阿拉伯半岛、中亚、东亚和澳大利亚5个主要沙漠地区中,起沙量和沉降量都存在明显的季节变化,除中亚其他4个区域干湿沉降量和起沙的季节变化基本一致;东亚地区沙尘气溶胶起沙量和总沉降量的季节变化最为明显,而北非沙漠起沙量和总沉降量的季节变化最小,其他3个区域的季节变化幅度基本相同.中亚起沙峰值和阿拉伯半岛起沙次峰值出现在夏季,其他区域的峰值均出现在春季.10年间全球陆地年平均起沙量为(1500±94)Mt,保持略微上升趋势.以北非沙漠起沙量年际变化率最低(6.3%), 而以东亚(28.3%)和澳大利亚(45.0%)起沙量年际变化最为明显;全球陆地的沙尘气溶胶沉降量以约9.9Mt/a的速率递减,全球海洋的沙尘气溶胶沉降递增.     

中国东部春季一次强冷锋活动空气污染输送过程分析

利用CMAQ(4.7.1)和HYSPLIT后向轨迹模式,结合长岛和洪泽湖站点污染物观测数据,对2011年3月31日—4月3日影响我国东北部地区的一次典型强冷锋天气空气污染过程进行模拟分析,验证表明模式能较好地模拟此次强冷锋过程. 由结果可知,此次强冷锋前后污染物浓度呈先升后降又上升的现象. 在冷锋移动过程中,锋前出现一条高浓度污染带,锋面将污染物抬升至800～500 hPa的高度,使污染物在对流层中层快速向西太平洋传输;冷锋对当地污染物的去除不仅有水平方向的推动作用,还会使污染物向高空输送. 锋面过后污染物浓度急剧降低,冷锋对长岛站点SO₂、O₃、NO_x、PM_2.5的清除率分别为90.87%、34.10%、50.56%、72.69%,对洪泽湖站点则分别为82.53%、50.45%、65.11%、36.80%. 锋面过去1~2 d后,高压控制天气形势下污染物再次开始积累、浓度回升. 冷锋前后污染物形成一个“积累—锋前抬升—高空平流输送—锋后大风清除—积累”的循环.      

A modeling system for drinking water sources and its application to Jiangdong Reservoir in Xiamen city

Drinking water sources are highly valued by authorities for safeguarding the life of a city. Models are widely applied as important and effective tools in the management of water sources. However, it is difficult to apply models in water source management because water managers are often not equipped with the professional knowledge and operational skills necessary for making use of the models. This paper introduces a drinking water source simulation and prediction system that consists of a watershed model, a hydrological model and a water quality model. This system provides methods and technical guidance for the conventional management of water sources and emergency water event response. In this study, the sub-models of the system were developed based on the data of the Jiangdong Reservoir in Xiamen, and the model validation was based on local monitoring data. The hydrological model and water quality model were integrated by computer programming, and the watershed model was indirectly integrated into the system through a network platform. Furthermore, three applications for Jiangdong Reservoir water protection utilizing the system were introduced in this paper, including a conventional simulation, an emergency simulation, and an emergency measures evaluation.     

Sovereign financial disaster risk management: The case of Mexico

In 2006, Mexico became the first transition country to transfer part of its public-sector natural catastrophe risk to the international reinsurance and capital markets. The Mexican case is of considerable interest to highly exposed transition and developing countries, many of which are considering similar transactions. Risk financing instruments can assure governments of sufficient post-disaster capital to provide emergency response, disaster relief to the affected population and repair public infrastructure. The costs of financial instruments, however, can greatly exceed expected losses, and for this reason it is important to closely examine their benefits and alternatives. This paper analyzes the Mexican case from the perspective of the risk cedent (the Ministry of Finance and Public Credit), which was informed by analyses provided by the International Institute for Applied Systems Analysis (IIASA). The rationale for a government to insure its contingent liabilities is presented along with the fiscal, legal and institutional context of the Mexican transaction. Using publicly available data, the paper scrutinizes the choice the authorities faced between two different risk-transfer instruments: reinsurance and a catastrophe bond. Making use of IIASA's catastrophe simulation model (CATSIM), this financial risk management decision is analyzed within the context of a public investment decision.     

Use of an Airborne Lidar System to Model Plant Species Composition and Diversity of Mediterranean Oak Forests

Abstract: Airborne lidar is a remote‐sensing tool of increasing importance in ecological and conservation research due to its ability to characterize three‐dimensional vegetation structure. If different aspects of plant species diversity and composition can be related to vegetation structure, landscape‐level assessments of plant communities may be possible. We examined this possibility for Mediterranean oak forests in southern Portugal, which are rich in biological diversity but also threatened. We compared data from a discrete, first‐and‐last return lidar data set collected for 31 plots of cork oak (Quercus suber) and Algerian oak (Quercus canariensis) forest with field data to test whether lidar can be used to predict the vertical structure of vegetation, diversity of plant species, and community type. Lidar‐ and field‐measured structural data were significantly correlated (up to r= 0.85). Diversity of forest species was significantly associated with lidar‐measured vegetation height (R²= 0.50, p < 0.001). Clustering and ordination of the species data pointed to the presence of 2 main forest classes that could be discriminated with an accuracy of 89% on the basis of lidar data. Lidar can be applied widely for mapping of habitat and assessments of habitat condition (e.g., in support of the European Species and Habitats Directive [92/43/EEC]). However, particular attention needs to be paid to issues of survey design: density of lidar points and geospatial accuracy of ground‐truthing and its timing relative to acquisition of lidar data.     

气温变化对西南山区流域森林水文效应影响的模拟

为了揭示气温变化对西南山区流域森林水文效应的影响,用生物物理/动态植被模型SSiB4/TRIFFID与流域地形指数水文模型TOPMODEL的耦合模型SSiB4T/TRIFFID模拟了西南山区长江上游梭磨河流域森林水文效应对气温变化的响应,分析了气温变化对植被不同演替阶段的流域总径流和总蒸发以及冠层截流蒸发、植被蒸腾和土壤蒸发的影响。结果表明,（1）梭磨河流域森林（常绿针叶林）蒸腾与草和灌木差异小,森林蒸腾潜热比草和灌木仅高1~4 W.m-2,森林冠层截留蒸发高于草和灌木,但土壤蒸发明显低于草和灌木覆盖,森林覆盖流域总蒸发低于草和灌木覆盖甚至低于裸土蒸发,因此增加了流域总径流量,但森林增加径流的作用随土壤蒸发的减小而减小。（2）气温减小1℃将通过减小森林冠层截留蒸发和蒸腾而使森林增加流域总径流量的作用增加;相反,气温增加将增加森林冠层截留蒸发和蒸腾而使森林增加总径流量的作用减小。（3）当温度增加4℃,由于森林总蒸发较草和灌木明显增加,对于较高的土壤蒸发,森林增加总径流量的作用已不明显;对于较低的土壤蒸发,森林减小了流域总径流量。     

An approach to calculating allowable watershed pollutant loads

To improve the management of discharge pollutants loads in the reservoirs’ watershed, an approach of the allowable pollutants loads calculation and its allocation, based on the water environment model, was proposed. Establishment of the approach framework was described at first. Under the guidance of this framework, two major steps were as follows: modeling and scenario analysis were involved and should be applied to support the decision of discharge loads management; Environmental Fluid Dynamic Code (EFDC) model was selected as the kernel model in this framework. In modeling step, spatial discretization for establishing cell map in model, data preprocessing, parameter calibration and uncertainty analysis (which is considered as the significantly relevant factor of the margin of safety (MOS)), were conducted. As a result of the research, the model-based approach presented as a combination of estimation and precise calculation, which contributed to scenario analysis step. Some integrated modules, such as scenario simulation, result analysis and plan optimization were implemented as cycles in the scenario analysis. Finally, allowable pollutant loads under various conditions were calculated. The Chaihe Reservoir in Liaoning Province, China was used as a case study for an application of the approach described above. Results of the Chaihe reservoir water quality simulation, show good agreement with field data and demonstrated that the approach used in the present study provide an efficient and appropriate methodology for pollutant load allocation.     

基于Blender的矿山虚拟现实快速构建与实现

为了实现矿山三维实体模型和虚拟现实的快速搭建与实现,分析了当前数字化矿山建模可移植性差、扩展性不灵活、开发难度大的缺陷 ,提出了一种矿山三维模型及虚拟现实体系的自动构建方法:基于Blender开源软件提供的建模平台,利用Python语言编写矿山实体的表达方法 与生成算法;利用矿山基础信息,实现了对矿山井巷、矿体等三维实体模型的自动、快速构建,并以矿山井巷工程、矿体以及地表模型等实体 模型的构建为例进行了演示;利用Blender脚本实现对三维实体模型的快速渲染,初步建立了矿山虚拟现实环境与仿真系统,并利用驱动内核实 现虚拟情景的演示。结果表明,该方法具有开发快捷、要求低等特点,为数字化矿山建设提供了一种新的思路。     

计算机废弃物的处理与利用

介绍计算机废弃物的来源、组成、污染,重点阐述了计算机废弃物的拆卸技术和塑料、线路板、贵金属的回收利用方法。对计算机废弃物处理有重要的参考借鉴价值。