中国地区太阳分光辐射观测网的建立与仪器标定

大规模的太阳分光地基联网观测不但能够直接为该项研究提供基础数据,同时也可为卫星遥感提供地表订正.利用性能优越的LED型太阳光度计,依托中国生态研究网络(CERN)分布在中国各地的观测站,建立了标准的太阳分光辐射观测网.利用Langley定标法结合量值传递定标法对观测网所有光度计的标定方法及误差分析表明,不同光度计间的同步观测结果(相对标准偏差小于3%)以及与CIMEL光度计的观测结果间(相对偏差小于5%)有很好的一致性,证实了观测结果的准确性以及该类型光度计及其观测网的稳定性和可靠性.     

Automated Calibration of the METRIC‐Landsat Evapotranspiration Process

A remaining challenge to applying satellite‐based energy‐balance algorithms for operational estimation of evapotranspiration (ET) is the calibration of the energy‐balance model. Customized calibration for each image date is generally required to overcome biases associated with radiometric accuracy of the image, uncertainties in aerodynamic features of the landscape, background thermal conditions, and model assumptions. The CIMEC process (calibration using inverse modeling at extreme conditions) is an endpoint calibration procedure where near extreme conditions in the image are identified where the ET can be estimated and assigned. In the Mapping EvapoTranspiration at high Resolution with Internalized Calibration (METRIC?) energy‐balance model, two endpoints represent the dry and wet ends of the ET spectrum. Generally, user‐intervention is required to select locations in the image to produce best accuracy. To bring the METRIC and similar processes into the domain of less experienced operators, a consistent, reproducible, and dependable statistics‐based procedure is introduced where relationships between vegetation amount and surface temperature are used to identify a subpopulation of locations (pixels) in an image that may best represent the calibration endpoints. This article describes the background and logic for the statistical approach, how the statistics were developed, area of interest requirements and assumptions, adjustment for dry conditions in desert climates, and implementation in a common image processing environment (ERDAS Imagine).     

WATER QUALITY MODEL CALIBRATION: A COMPARISON OF INPUT AND OUTPUT ERROR CRITERIA1

ABSTRACT: A common framework for the analysis of water resources systems is the input-parameter-output representation. The system, described by its parameters, is driven by inputs and responds with outputs. To calibrate (estimate the parameters) models of these systems requires data on both inputs and outputs, both of which are subject to random errors. When one is uncertain as to whether the predominant source of error is associated with inputs or outputs, uncertainty also exists as to the correct specification of a calibration criterion. This paper develops and analyzes two alternative least squares criteria for calibrating a numerical water quality model. The first criterion assumes that errors are associated with inputs while the second assumes output errors. Statistical properties of the resulting estimators are examined under conditions of pure input or output error and mixed error conditions from a theoretical perspective and then using simulated results from a series of Monte Carlo experiments.     

EFFICIENTLY REDUCING NONPOINT PHOSPHORUS LOADS TO LAKES AND RESERVOIRS1

ABSTRACT: Several problems that make it difficult to deal with water pollution from cropland are identified. The most immediate need is for a rational framework for determining where conservation programs can make an impact on eutrophication problems in reservoirs draining rural watersheds. This includes estimating the level of control that would be required for each local farm situation and the economic impacts for the planning area. A modeling approach is suggested for a planning area in Southeastern Pennsylvania.     

OPTIMIZING NONPOINT SOURCE CONTROLS IN WATER QUALITY REGULATION1

ABSTRACT: A stochastic programming framework is developed to evaluate the economic implications of reliability criteria and multiple effluent controls on nonpoint source pollution. An integrated watershed simulation model is used to generate probability distributions for agricultural effluents in surface and ground water resulting from agricultural practices. Results from the planning model indicate that reliability and multiple effluent constraints significantly increase the cost of nonpoint controls but the effects vary by control alternative. The analysis indicates that an evaluation of multiple water quality objectives can be an important planning tool for designing nonpoint source controls for innovative programs to promote cost-effective water quality regulation.     

A PRELIMINARY QUANTIFICATION OF THE IMPACTS OF ASPEN TO CONIFER SUCCESSION ON WATER YIELD - I. HEAT PULSE METHODOLOGY FOR MODEL CALIBRATION1

ABSTRACT: Twenty-six aspen (Populus tremuloides Michx.), 20 subalpine fir (Abies lasiocarps (Hook.) Nutt.), and 20 Engelmann spruce (Pices engelmanil (Parry) Engelm.) of various sizes were cut under water and suspended in permanent reserviors at a northern Utah site. The reservoirs were asealed so that all water loss was due to consumption by the trees. Sap velocities, as computed from heat pulse velocities, were related to conducting areas of the tree trunks. Computed transpiration volumes were then correlated with actual water losses from the reservoirs. Coefficients of determination (R²) of 0.87, 0.86, and 0.82 were obtained for the fir, aspen, and sprucs, respectively. Reservoir water loss for each species for each season was then used to adjust a plant activity index for computing transpiration within ASPCON, a model describing the hydrology of aspen to conifer succession. The plant activity index reflects the variation in the capability of a plant community to transpire water over the year. Assumptions and limitations of the heat pulse velocity technique are also outlined.     

试论酸度计在pH测定中的定位问题

本文阐述了酸度计在测定ｐＨ时温度补偿的原理,分析了错误定位的原因,指出了正确的定位方法     

基于SAE-ARP958环天线校准技术研究

目的介绍基于SAE-ARP958环天线校准技术,研究提高该校准精确性的方法,为精确监测电磁环境提供保障。方法研制一套基于SAE-ARP958环天线的校准装置,提出采用直径分别为30,10,4 cm的三个发射环天线作为磁场发生装置的校准方案,并利用对比测试的方法对校准方案进行优化。结果优化后的校准方案能够实现环天线的精确校准。结论基于SAE-ARP958环天线校准方法具有不受待校环尺寸限制的优点,而且精确性高,值得向具有较多不同尺寸的环天线用户推广。     

Evaluating the Applicability of a Two‐dimensional Flow Model of a Highly Heterogeneous Domain to Flow and Environmental Management

Two‐dimensional simulation of highly heterogeneous domains, especially those with disparate length scales, roughness conditions, and geometries, often leads to challenges such as long computation times and numerical instability. Simulation of challenging domains is often needed to guide flood management and environmental regulation agencies in operation and potential domain modifications. This work evaluates the ability of a two‐dimensional unsteady hydrodynamic model to represent long‐duration transient flows over a domain with highly heterogeneous roughness, geometric characteristics, and length scales through bed roughness representation. The domain includes 13 km of Cache Creek and the 14.5 km² Cache Creek Settling Basin, which traps both sediment and mercury. Calibration under different bed roughness methods, validation, and modeling results of bathymetric modification scenarios are presented. The modeling approach's performance supports its application as a tool for management of similar domains, such as settling basins, leveed floodplains, and reservoirs. Accurate representation of flow dynamics can also inform environmental management that involves transport of sediments, nutrients, and heavy metals. This study found that a two‐dimensional unsteady flow model can accurately represent long‐duration transient flow in a large settling basin with highly heterogeneous characteristics without parsing of the domain or flow events simulated.     

二氧化氮标准物质校准氮氧化物分析仪的差异性

采用一氧化氮、二氧化氮标准物质对化学发光法的氮氧化物分析仪进行校准,并分析校准系统中零气源、连接管路、动态气体校准仪和标准物质对二氧化氮校准的影响,发现一氧化氮标准物质中的二氧化氮杂质会影响氮氧化物的校准结果,得出氮氧化物分析仪校准需要进行二氧化氮补偿的结论;同时,通过比较国产二氧化氮和进口二氧化氮标准物质产生的校准结果,得出进口二氧化氮标准物质较国产二氧化氮标准物质的稀释结果具有更好的稳定性和一致性。