火电厂电除尘器电控系统的节能改造

电除尘器是火力发电厂的高能耗设备,从细节入手,挖掘电除尘器节能潜力,利用原有设备进行改造,采用简易脉冲供电方式和临界反电晕供电方式可以提高电除尘器电能的利用率,大幅度地降低电除尘器的能耗,实现节能。通过对电除尘器电控系统改造实例的前后电场参数进行比较,说明这种改造方法是可行的,实现了经济、节能与环保三者的兼顾与统一。     

袋式除尘器在沥青混凝土搅拌设备上的应用

分析了沥青混凝土搅拌设备的构成以及生产沥青混凝土的工艺及烟尘特点;通过应用工程实例,指出袋式除尘器是沥青混凝土搅拌设备最理想的除尘系统之一。     

Facilitating substance phase‐out through material information systems and improving environmental impacts in the recycling stage of a product

The amount of electrical and electronic products is increasing rapidly, and this inevitably leads to the generation of large quantities of waste from these goods. Some of the generated e‐waste ends up in regions with sub‐standard recycling systems and may be processed under poor conditions. During uncontrolled incineration, halogenated dioxins and furans can be generated from brominated and chlorinated compounds in the products. In order to reduce the health and environmental risks involved in the recycling stage of the life cycle of electronics, an effective design‐for‐environment process must be established during the product development phase. Knowledge of the chemical substances in the product is crucial to being able to make informed decisions. Through full knowledge of the material content of procured components, phase‐outs of unwanted substances, such as halogenated substances, can be performed in an effective manner. Therefore, information is the key to success in phasing‐out substances; facilitating compliance of legal provisions for manufacturers of electrical and electronic devices; and improving the environmental footprint of products as they reach the end of the life cycle. After an introduction to the challenges of electronics waste management, this paper describes supply chain information systems and how they are used to facilitate substance phase‐outs in the electronics industry. Sony Ericsson has been working with phase‐outs of unwanted substances since it was founded in 2001. Through the introduction of a material declaration system that keeps track of all substances in the components used in the company's products, Sony Ericsson has been able to replace unwanted substances to improve environmental impacts at the recycling stage of a product.     

柴油低温临界吸收法回收装车挥发油气

研究了采用柴油低温临界吸收法回收装车挥发油气的效果。实验结果表明：按装车挥发油气中的总烃体积分数为20.88%、装车挥发油气流量为280 m³/h、年运行时间为2 668 h计,装置年回收油气量为291 t,装置年最大运行功率为206.770 MW,装置投资回收期为3 a;处理后净化气中的总烃体积分数为1.24%,排放质量浓度低于25 g/m³,油气回收率达95%。处理后净化气满足GB 20950—2007《储油库大气污染物排放标准》,取得了较好的环保效益和经济效益。     

不同场地条件下水下隧道周围土体位移变化的数值分析

以拟建的哈尔滨松花江隧道为背景,考虑土体—衬砌的材料非线性特性和相互作用,按平面应变假定,建立在不同场地条件下的若干接近实际的有限元计算模型,应用有限元计算软件ANSYS进行数值分析,得出不同场地条件下隧道周围土体位移的分布规律,遴选出了影响水下隧道周围土体变形的部分关键因素,为合理确定隧道覆土层安全厚度提供了一定的理论依据。     

大空间单跨门式刚架结构抗火性能影响因素的客观权重研究

火灾时的大空间单跨门式刚架结构抗火性能,受钢构件温升和结构整体抗火临界温度的影响.本文通过对无保护大空间建筑钢构件温升数据的统计分析,获得包含火源功率、建筑体积、钢构件截面形状系数的钢构件温升拟合公式;结合单跨门式刚架结构整体抗火临界温度数据的统计分析,获得包含荷载比、柱高和系数K的结构整体抗火临界温度拟合公式;通过分...     

约束高强度Q460钢柱抗火性能分析

为了研究高强度约束钢柱在火灾下的反应,根据高强度结构钢Q460在高温下的力学性能参数,建立了约束高强度钢柱受火分析模型,得到了高强度约束钢柱在火灾下的轴向位移、跨中挠度、最大应力以及临界温度。采用有限元分析对理论结果进行了验证,两者吻合很好。利用验证过的该文计算方法计算了2种荷栽比、长细比和约束刚度比条件下的高强钢柱的抗火性能;采用CECS200:2006的力学性能参数计算了约束普通钢柱的抗火性能。通过对高强钢和普通钢的抗火性能分析发现,轴向约束明显降低钢柱的临界温度,长细比、荷载比越大,临界温度越低;高强钢的抗火性能要优于普通钢。     

2008年低温雨雪冰冻对武汉城市公共交通的影响评估

为了对2008年低温雨雪期间气象条件对城市交通运输的影响给出定量评估,运用天气分析及统计学方法,分析了低温雨雪冰冻期间武汉市主要气候特征,利用2008年初持续低温雨雪期间武汉城市公共交通线路（包括公交车、轮渡、汽渡）逐日停运数据,定义了持续低温雨雪冰冻过程城市公共交通影响度,通过统计分析,找到了关键气象因子、关键期和低温临界指标,建立了气象评估模型。结果表明：在持续低温雨雪冰冻过程中,初发时期是公共交通影响的关键时期之一,影响度与积雪深度关系最密切,在公交车、轮渡、汽渡3种交通工具中,公交车影响度与气象要素的相关最密切,对武汉城市公交车造成明显影响的临界气温是17℃。该结论在实际的气象灾害评估业务工作中进行了运用,效果良好     

Engineered nanomaterials in rivers--exposure scenarios for Switzerland at high spatial and temporal resolution

Probabilistic material flow analysis and graph theory were combined to calculate predicted environmental concentrations (PECs) of engineered nanomaterials (ENMs) in Swiss rivers: 543 river sections were used to assess the geographical variability of nano-TiO₂, nano-ZnO and nano-Ag, and flow measurements over a 20-year period at 21 locations served to evaluate temporal variation. A conservative scenario assuming no ENM removal and an optimistic scenario covering complete ENM transformation/deposition were considered. ENM concentrations varied by a factor 5 due to uncertain ENM emissions (15%-85% quantiles of ENM emissions) and up to a factor of 10 due to temporal river flow variations (15%-85% quantiles of flow). The results indicate highly variable local PECs and a location- and time-dependent risk evaluation. Nano-TiO₂ median PECs ranged from 11 to 1′623 ng L⁻¹ (conservative scenario) and from 2 to 1′618 ng L⁻¹ (optimistic scenario). The equivalent values for nano-ZnO and nano-Ag were by factors of 14 and 240 smaller.     

浅谈对热电企业的环境监督管理

对热电企业的环境监管工作是环保部门的重要职责,根据在对热电企业日常监管中遇到的问题,论述了监管的常用方法,包括监督企业环境管理落实情况、核查企业环保数据真实性及重视群众对企业的监督,并就相关工作展开了具体讨论。