国内电炉钢发展现状与应用前景

通过电炉铜与转炉铜能耗对比,突显了电炉钢的节能与环保优势,同时介绍了国内外电炉钢应用现状。随着社会工业化的发展所带来的钢铁积蓄量的增加,以及电炉钢技术的不断完善和发展,加之迎合国家低碳经济政策的实施,国内电炉钢发展具有广阔前景。     

不同加热方式下催化氧化甲苯的性能研究

研究考察了微波单模腔、多模腔与传统电炉三种不同加热方式下甲苯的催化氧化性能,分析不同加热方式下进出口气体温度和固定床反应温度的变化,并对实验前后的Cu-Mn-Ce/TiO2-分子筛催化剂进行了扫描电镜、X射线衍射和比表面积等表征测试.研究表明,相同工艺条件下电炉加热、微波多模腔与单模腔加热对甲苯的去除效率分别为77%、83%和94%,对应的床层反应温度为265℃、215℃和145℃,微波加热的选择性、"热点效应"和偶极极化作用提高了甲苯的降解效率并降低其氧化温度和工艺处理能耗,微波单模腔内高的能量密度显著提高了甲苯的氧化效率并降低反应温度.催化剂表征发现,微波加热对催化剂结构与活性组分的分布几乎没有影响,而电炉加热则导致催化剂表面烧结与活性组分团聚,微波加热下催化剂更大的比表面积有利于甲苯的吸附与氧化降解.     

玻璃熔窑SCR烟气脱硝设计的影响因素分析

对影响玻璃熔窑SCR烟气脱硝设计的几个主要因素,如烟气条件（烟气量和NOx初始浓度）、还原剂、催化剂、SCR反应器布置方式及催化剂吹灰方式等进行了分析与讨论,指出在对玻璃熔窑进行SCR烟气脱硝设计时应根据燃料情况、烟气条件、生产工艺、环保法规及污染物减排要求等合理进行选择,以确保玻璃熔窑SCR烟气脱硝系统安全运行及工程投资、运行费用的经济合理性。     

高炉煤气干法除尘技术的发展

我国是采用高炉煤气干法袋式除尘最早的国家之一,至今已有40多年的历史。本文介绍了高炉煤气干法除尘技术发展的三个阶段,即起步、发展,以及炉容1000m3以上级的提高阶段,认为采用干法除尘,才能节能减排,实现综合利用。     

Integrating soil carbon cycling with that of nitrogen and phosphorus in the watershed model SWAT: Theory and model testing

In this paper we describe and test a sub-model that integrates the cycling of carbon (C), nitrogen (N) and phosphorus (P) in the Soil Water Assessment Tool (SWAT) watershed model. The core of the sub-model is a multi-layer, one-pool soil organic carbon (S_C) algorithm, in which the decomposition rate of S_C and input rate to S_C (through decomposition and humification of residues) depend on the current size of S_C. The organic N and P fluxes are coupled to that of C and depend on the available mineral N and P, and the C:N and N:P ratios of the decomposing pools. Tillage explicitly affects the soil organic matter turnover rate through tool-specific coefficients. Unlike most models, the turnover of soil organic matter does not follow first order kinetics. Each soil layer has a specific maximum capacity to accumulate C or C saturation (S_x) that depends on texture and controls the turnover rate. It is shown in an analytical solution that S_x is a parameter with major influence in the model C dynamics. Testing with a 65-yr data set from the dryland wheat growing region in Oregon shows that the model adequately simulates the S_C dynamics in the topsoil (top 0.3 m) for three different treatments. Three key model parameters, the optimal decomposition and humification rates and a factor controlling the effect of soil moisture and temperature on the decomposition rate, showed low uncertainty as determined by generalized likelihood uncertainty estimation. Nonetheless, the parameter set that provided accurate simulations in the topsoil tended to overestimate S_C in the subsoil, suggesting that a mechanism that expresses at depth might not be represented in the current sub-model structure. The explicit integration of C, N, and P fluxes allows for a more cohesive simulation of nutrient cycling in the SWAT model. The sub-model has to be tested in forestland and rangeland in addition to agricultural land, and in diverse soils with extreme properties such high or low pH, an organic horizon, or volcanic soils.     

中铝洛铜熔铸厂16吨黄铜炉组除尘系统改造

通过对中铝洛铜熔铸厂16t黄铜炉组除尘系统出现的问题采取相应对策进行改造,探讨了通过屋顶罩排烟系统来解决黄铜炉组炉盖开启操作时产生大量烟尘的方法,具有实用性,同时针对黄铜炉熔炼产生烟尘的特点,提出了适合氧化锌回收的除尘改造方案.     

电捕法净化焙烧炉沥青烟气

针对炭素焙烧炉烟气特点,采用雾化水预处理和电捕焦油技术,对某炭素厂焙烧炉烟气进行治理,达到既高效净化有害气体,又降低资金投入。处理后的烟气指标为:沥青烟浓度13.8mg/m3,苯并(a)芘浓度0.053×10-3mg/m3,烟尘浓度19.1mg/m3,各项污染物均达标排放。     

酸浸粉煤灰混凝法处理制革废水的研究

笔者研究了在热电厂粉煤灰中加入少量的鼓风炉铁泥和适量的助溶剂HS,在加热条件下用稀硫酸搅拌浸取2h后,制得集物理吸附和化学混凝为一体的混凝剂。这种混凝剂与聚硅酸铝铁(PSAF)絮凝剂配合处理COD为1500～2000mg/L制革废水,SS,COD,硫化物和铬的去除率分别为95%,93%,92%和88%。该法的显著特点是混凝沉降速度快,污泥体积小,处理废水费用低,此外还探讨了酸浸粉煤灰混凝剂对制革废水的混凝沉降机理。      

闪速炉烟尘收尘装置的改造

简要概述了闪速炉气力输送系统收尘装置的改造和圆筒型布袋收尘装置在气力输送系统中使用的效果.     

聚二甲基二烯丙基氯化铵改性高炉渣的制备及其应用

用聚二甲基二烯丙基氯化铵(PDMDAAC)改性高炉渣以提高其对印染废水的处理能力.研究了改性过程中改性剂浓度、温度和制备时间对改性效果的影响,对模拟印染废水和实际印染废水进行了处理,表明PDMDAAC改性大大提高了高炉渣对染料的吸附能力.