强化生物通风修复过程中柴油衰减规律及其影响因素研究

强化生物通风技术对于修复因地下储油罐泄漏引起的土壤污染具有很大的应用前景。通过室内土柱模拟柴油泄漏污染土壤,从土柱中总石油烃（total petroleum hydrocarbon,TPH）剖面分布随时间的变化及降解模式角度,分析了其自然衰减和强化生物通风过程。结果表明：初始柴油浓度直接影响着各柱在自然衰减和强化生物通风过程中柱内的残余TPH平衡分布曲线的形状和浓度峰值位置;在前期自然衰减过程中（约1个月）,当土壤中的柴油浓度为5 000～40 000 mg油/kg土时,整个柱内TPH变化的主要原因是重力扩散迁移的结果;当土壤中的柴油浓度≤5 000 mg油/kg土时,其TPH的变化不仅是重力扩散迁移作用的结果,生物降解作用也存在;通风约2个月后,抽提作用对于保持土柱上部柴油浓度稳定变化的意义较为突出。     

长江中上游防护林体系森林植被碳贮量及固碳潜力估算

基于“八五”期间长江中上游流域各省的森林资源调查资料,结合经典的材积源生物量法估算了长江中上游防护林体系生物量碳密度和碳贮量,并根据不同树种生物量-生产力回归关系推算了该地区当前的固碳潜力。结果表明：长江中上游地区森林平均碳密度为2575 t/hm2;碳贮量为1 39459 Tg (1 Tg = 1012 g),其中林分（包括经济林）碳贮量为1 20430 Tg,灌木林为13437 Tg,竹林为5592 Tg,三者分别占总碳贮量的8636%、963%和401%。整个防护林体系森林植被的固碳潜力为36856 Tg/a。位于本区西部的四川盆地嘉陵江流域和西部高山峡谷区,其森林碳密度、碳贮量和固碳潜力较高,而东部地区的川鄂山地长江干流、鄱阳湖水系以及洞庭湖水系相对较低,因此,长江中上游森林碳密度、碳贮量和固碳潜力总体上呈现自西向东逐渐降低的趋势。     

A survey on the public perception of CCS in France

An awareness and opinion survey on carbon capture and storage (CCS) was conducted on a representative sample of French residents aged 15 years and above. About 6% of respondents were able to provide a satisfactory definition of the technology. The key question about ‘approval of or opposition to’ the use of CCS in France was asked twice, first after presenting the technology, then after explaining its potential adverse consequences. The approval rates, which were 59% and 38%, respectively, show that there is no a priori rejection of the technology. The sample was split in two to test for a semantic effect: half of the questionnaires used “Stockage” (English: storage), the other half “Sequestration”. Manipulating the vocabulary had no statistically significant effect on approval rates. Stockage is more meaningful, but does not convey the idea of permanent monitoring.     

Model prediction on the rise of pCO2 in uniform flows by leakage of CO2 purposefully stored under the seabed

A numerical study was conducted to predict pCO₂ change in the ocean on a continental shelf by the leakage of CO₂, which is originally stored in the aquifer under the seabed, in the case that a large fault connects the CO₂ reservoir and the seabed by an earthquake or other diastrophism. The leakage rate was set to be 6.025 × 10⁻⁴ kg/m²/sec from 2 m × 100 m fault band, which corresponds to 3800 t-CO₂/year, referring to the monitored seepage rate from an existing EOR field. The target space in this study was limited to the ocean above the seabed, the depth of which was 200 or 500 m. The computational domain was idealistically rectangular with the seabed fault-band perpendicular to the uniform flow. The CO₂ takes a form of bubbles or droplets, depending on the depth of water, and their behaviour and dissolution were numerically simulated during their rise in seawater flow. The advection–diffusion of dissolved CO₂ was also simulated. As a result, it was suggested that the leaked CO₂ droplets/bubbles all dissolve in the seawater before spouting up to the atmosphere, and that the increase in pCO₂ in the seawater was smaller than 500 μ atm.     

盐穴地下储气库事故统计及风险分析

借鉴输气管道和二氧化碳地下封存设施的风险评价方法,结合盐穴地下储气库的事故统计分析,对储气库系统中的潜在风险因素进行12大类、35小类的初步分类,并归纳总结了盐穴地下储气库的3种主要事故类型。采用事故树分析的风险评价方法,对13种主要风险因素进行风险识别。在此基础上,提出定量风险评价的重要工程模型,其包括气体水合物模型、盐穴稳定性评价模型以及气体泄漏模型。该风险分析方法和工程模型有助于定量评价盐穴地下储气库的主要风险因素,为储库的安全稳定运行提供了科学依据。     

河南省秸秆能源化利用研究

在日益严峻的能源短缺和环境污染的双重压力下,进行秸秆能源化的开发和利用对于河南新型城镇化建设具有重大战略意义.河南秸秆资源丰富,但秸秆能源化利用尚处于初级阶段,利用率非常低,只有健全秸秆收储体系,改进各种秸秆能源化利用方式的技术性能,加强应用和推广,提升秸秆能源化利用的经济效益,加大对秸秆能源化利用相关主体的引导和扶持,提供政策和资金支持,才能为河南秸秆能源化发展提供良好的环境.     

我国废铅蓄电池产生量与再生铅产能的讨论

废铅蓄电池是再生铅主要原料,铅蓄电池产量、进出口量、社会消费保有量,以及铅蓄电池消费使用领域与废铅蓄电池产生量有关。预测2015年废铅蓄电池产生量,并讨论我国再生铅产能规模,供再生铅产业结构调整与区域布局调整作参考。     

冲击负荷对厌氧序批式反应器的影响及其恢复重建过程

研究了在厌氧条件下以葡萄糖为基质的厌氧序批式反应器(ASBR)中冲击负荷对基质吸收和储存的影响及其恢复重建过程.结果表明,正常状态下,反应器在进水COD为5 000.0 mg/L,出水COD为188.6 mg/L,当进水负荷提高至正常状态2倍后,反应器中COD大量累积,其中51.13％为挥发性有机酸(VFA),48.87％则被转化为糖原储存在细胞体内,出水COD最高为2 368.9 mg/L,污泥糖原储存量最高为273.55 mg/g(以挥发性固体计),是正常状态的4.2倍.在冲击负荷条件下,反应器的产甲烷能力恢复较快,胞内糖原储存恢复较慢,出水COD和胞内糖原分别经过20、41 d后恢复冲击负荷前水平.     

Effective EU and Member State policies for stimulating CCS

Although CO₂ capture and storage (CCS) is widely recognised as an option to mitigate climate change, consistent and effective EU policies to advance CCS are still absent. This paper discusses policy instruments for advancing large-scale deployment of CCS in the European Union, and evaluates them in a multi-criteria analysis. The EU Emissions Trading Scheme (EU-ETS) is a cost-effective instrument for limiting greenhouse gas emissions, but it is questionable whether its currently limited time horizon and short-trading periods will lead to substantial CCS diffusion. Complementary policies at the EU and the Member State level may repair this and provide sufficient incentives for CCS. Potential policies include financial instruments such as investment subsidies, a feed-in scheme, or a CO₂ price guarantee, as well as a CCS mandate or a low-carbon portfolio. These policy options differ with respect to their environmental effectiveness, possible interaction with the EU-ETS, costs and financial risk involved, and their competition with other mitigation options. Interactions between Member State policies and the EU-ETS are smaller in scope than those of EU-wide policies, but they are more likely to lead to displacement of financial resources from other low-carbon technologies. In addition, national policies may pose a significant part of the financial risk of CCS operations with Member States, reducing the operator's incentive to innovate. Overall, structural policies at the EU level, such as a mandate or a low-carbon portfolio standard would be more conducive for realising large-scale deployment of CCS across the EU as well as more acceptable to environmental organisations.     

Assessing the economic feasibility of regional deep saline aquifer CO2 injection and storage: A geomechanics-based workflow applied to the Rose Run sandstone in Eastern Ohio, USA

Typical top-down regional assessments of CO₂ storage feasibility are sufficient for determining the maximum volumetric capacity of deep saline aquifers. However, they do not reflect the regional economic feasibility of storage. This is controlled, in part, by the number and type of injection wells that are necessary to achieve regional CO₂ storage goals. In contrast, the geomechanics-based assessment workflow that we present in this paper follows a bottom-up approach for evaluating regional deep saline aquifer CO₂ storage feasibility. The CO₂ storage capacity of an aquifer is a function of its porous volume as well as its CO₂ injectivity. For a saline aquifer to be considered feasible in this assessment it must be able to store a specified amount of CO₂ at a reasonable cost per ton of CO₂. The proposed assessment workflow has seven steps that include (1) defining the storage project and goals, (2) characterizing the geology and developing a geomechanical model of the aquifer, (3) constructing 3D aquifer models, (4) simulating CO₂ injection, (5,6) evaluating CO₂ injection and storage feasibility (with and without injection well stimulation), and (7) determining whether it is economically feasible to proceed with the storage project. The workflow was applied to a case study of the Rose Run sandstone aquifer in the Eastern Ohio River Valley, USA. We found that it is feasible in this region to inject 113 Mt CO₂/year for 30 years at an associated well cost of less than US $1.31/t CO₂, but only if injectivity enhancement techniques such as hydraulic fracturing and injection induced micro-seismicity are implemented.