应用GIS模拟城市大气污染物浓度分布

从点源大气污染扩散模型出发,借助GIS的栅格与数据库运算功能,结合自已设计的推算流程,对兰州市大气污染物SO2的空间分布情况进行了模拟。经检验,该方法能够较准确的反映出兰州大气污染物的空间分布特征,较应用实测值进行插值的方法简便,具有较好的应用前景。     

连云港市新海地区水污染集中控制系统

本文论述了连云港市新海地区水污染集中控制系统的四个主要问题：尾水最终出口，污水截流工程，污水集中处理工艺、点源治理规划。提出了的近北远南，截流沟道、河滩漫流、排口分级管理的新观点。     

土壤中苯向大气挥发过程的影响因素和通量特征研究

采用通量箱(30.0 cm×17.5 cm×29.0 cm)研究砂土与黑土中苯挥发过程中的影响因素和通量变化特征.通过模拟不同空气流速、不同温度,并设定土壤类型、土壤含水量、初始浓度等条件,实时监测通量箱中各层土壤气相中和土壤上方空气中苯的浓度,来分析不同条件下苯的挥发特征.结果表明,砂土和黑土中苯的挥发通量分别随着土壤含水量的增加而降低,土壤充气空隙率相近情况下,苯在砂土中的挥发通量明显高于黑土.空气流速在300~900 mL·min-1范围内,砂土中苯挥发通量随空气流速升高而加大;在20~40℃范围内对黑土的试验结果表明,苯挥发强度受温度影响显著.苯挥发通量与土壤中苯浓度呈线性相关,其可根据土壤中苯初始浓度和水溶出浓度进行预测.     

薏米壳生物炭的制备及其对Cr（Ⅵ）的吸附性能

采用限氧控温热分解法在不同温度下制备了薏米壳生物炭。研究了薏米壳生物炭对低浓度Cr（Ⅵ）的吸附性能及吸附机理。随碳化温度升高,薏米壳管状通道微孔结构逐渐显现,薏米壳生物炭表面芳香化程度增强。薏米壳生物炭对Cr（Ⅵ）的吸附行为采用Langmuir等温吸附模型吻合度更高,吸附属于单分子层化学吸附,吸附过程是自发的、熵增吸热反应,吸附过程遵循准二级吸附动力学模型,膜扩散和颗粒内扩散共同控制吸附过程。     

大气污染扩散的高斯烟羽模型及其GIS集成研究

以VB6结合SuperMap Objects 5.2为开发平台,实现高斯烟羽模型与GIS的集成,可视化地表达大气污染物的扩散过程,并通过实例讨论了GIS与烟羽模型集成的方法、技术流程及其他相关问题.     

絮凝体的DLA分形模拟及其分形维数的计算方法

运用有限扩散凝聚(DLA)模型对絮凝体的成长过程进行了二维模拟.模拟絮凝体分别采用密度函数法、回转半径法、图像分析法进行分形维数计算,分形维数均随模拟絮凝体尺寸的增大而减小.三种计算方法的结果显示,密度函数法和回转半径法得到的分形维数基本相当,但图像分析法所得到的分形维数较小,约为密度函数法和回转半径法所得到的分形维数的0.8左右,其原因可能是图像分析过程中计算机对图像的识别误差所致.以DLA模型模拟得到的絮凝体内部的孔隙率随絮凝体尺寸的增大而增加.絮凝体中孔隙率的增加是絮凝体密度减小、结构松散的主要原因,也是絮凝体分形维数降低的主要因素.     

Estimating Air Quality in a Traffic Tunnel Using a Forecasting Combination Model

This study performs a field analysis of the diffusion collection rate coefficients of radial geometry passive samplers to measure NO₂ in a Mediterranean coastal area. The study shows that the collection rate coefficients are not constant and depend on certain environmental parameters as well as on the levels of some co-pollutants. A mathematical model, which explains the variation of the collection rate coefficient, has been established.     

大气超细颗粒物观测和扩散模拟研究进展

总结了近年来不同地区对不同环境下大气超细颗粒物的观测和扩散模拟研究进展。大量的观测研究结果表明,大气超细颗粒物的时空分布、组成特征、形成和成长的特性因观测地区的不同而存在很大差异,受气象因素和局部污染源的影响很大;其来源主要包括固定、移动燃烧源的直接排放和大气中颗粒成核现象,前一种来源一般是局部的,而后一种来源则是区域性的。目前,大多数关于大气超细颗粒物扩散的模拟研究都是针对其质量浓度的,对其数浓度扩散的模拟研究主要集中在小范围(机动车排放烟云的研究方面),在城市区域范围上的研究和应用还很少。最后,探讨和展望了大气超细颗粒物今后的主要研究方向和研究中面临的挑战。     

Laboratory longitudinal diffusion tests: 1. Dimensionless formulations and validity of simplified solutions

To obtain reliable diffusion parameters for diffusion testing, multiple experiments should not only be cross-checked but the internal consistency of each experiment should also be verified. In the through- and in-diffusion tests with solution reservoirs, test interpretation of different phases often makes use of simplified analytical solutions. This study explores the feasibility of steady, quasi-steady, equilibrium and transient-state analyses using simplified analytical solutions with respect to (i) valid conditions for each analytical solution, (ii) potential error, and (iii) experimental time. For increased generality, a series of numerical analyses are performed using unified dimensionless parameters and the results are all related to dimensionless reservoir volume (DRV) which includes only the sorptive parameter as an unknown. This means the above factors can be investigated on the basis of the sorption properties of the testing material and/or tracer. The main findings are that steady, quasi-steady and equilibrium-state analyses are applicable when the tracer is not highly sorptive. However, quasi-steady and equilibrium-state analyses become inefficient or impractical compared to steady state analysis when the tracer is non-sorbing and material porosity is significantly low. Systematic and comprehensive reformulation of analytical models enables the comparison of experimental times between different test methods. The applicability and potential error of each test interpretation can also be studied. These can be applied in designing, performing, and interpreting diffusion experiments by deducing DRV from the available information for the target material and tracer, combined with the results of this study.     

Does localized imitation drive technology adoption? A case study on rooftop photovoltaic systems in Germany

The purpose of this paper is to illuminate the spatio-temporal diffusion of rooftop household photovoltaic installations in Germany and to test whether localized imitation drives their adoption. Our study is based on a unique data set of some 576,000 household photovoltaic systems installed in Germany through 2009. We employ an epidemic diffusion model which includes a spatial dimension, and control for temporal and spatial heterogeneity. According to our results, imitative adoption behavior is highly localized and an important factor for the diffusion of household photovoltaic systems.