State of research on the automation of HAZOP studies

For more than 30 years, multiple research groups have worked on the automation of hazard and operability (HAZOP) studies, or more specifically on the hazard identification process. So far, very few of these approaches have been used in the chemical process industry. Automatic hazard identification is a knowledge-intensive process that demands high standards with regard to the way in which knowledge is stored and made available. There are various suitable approaches to the qualitative modeling of processes and plants, which are the foundation for reasoning systems that are used for the identification of hazards. Additionally, there are quantitative methods that are based on process simulations and can be used to identify potential hazards. The investigation of the state of research demonstrates that there are sophisticated technologies for automated systems that include powerful reasoning techniques. The benefits and shortcomings of existing technologies are discussed with regard to their industrial applicability. Often, the quality of the necessary specific and generic knowledge is not sufficient to detect potential hazardous events and operational malfunctions. Computer-aided HAZOP systems should be integrated with computer-aided design- or process simulation software using common data models based on the digital representation of the process plant. In order to be used by HAZOP practitioners automated systems need to be comprehensive, serve as specialized decision support systems, and be tested and evaluated using round robin tests.     

Solar energy for electricity and fuels

Solar energy conversion into electricity by photovoltaic modules is now a mature technology. We discuss the need for materials and device developments using conventional silicon and other materials, pointing to the need to use scalable materials and to reduce the energy payback time. Storage of solar energy can be achieved using the energy of light to produce a fuel. We discuss how this can be achieved in a direct process mimicking the photosynthetic processes, using synthetic organic, inorganic, or hybrid materials for light collection and catalysis. We also briefly discuss challenges and needs for large-scale implementation of direct solar fuel technologies.     

Fuzzy experts on recreational vessels, a risk modelling approach for marine invasions

Understanding risks from the human-mediated spread of non-indigenous species (NIS) is a critical component of marine biosecurity management programmes. Recreational boating is well-recognised as a NIS pathway, especially at a regional scale. Assessment of risks from this pathway is therefore desirable for coastal environments where recreational boating occurs. However, formal or quantitative risk assessment for the recreational vessel pathway is often hampered by lack of data, hence often relies on expert opinion. The use of expert opinion itself is sometimes limited by its inherent vagueness, which can be an important source of uncertainty that reduces the validity and applicability of the assessment. Fuzzy logic, specifically interval type-2 fuzzy logic, is able to model and propagate this type of uncertainty, and is a useful technique in risk assessment where expert opinion is relied upon. The present paper describes the implementation of a NIS fuzzy expert system (FES) for assessing the risk of invasion in marine environments via recreational vessels. The FES was based on expert opinion gathered through systematic elicitation exercises, designed to acknowledge important uncertainty sources (e.g., underspecificity and ambiguity). The FES, using interval type-2 fuzzy logic, calculated an invasion risk value (integrating NIS infection and detection probabilities) for a range of invasion scenarios. These scenarios were defined by all possible combinations of two vessel types (moored and trailered), five vessel components (hull, deck, internal spaces, anchor, fishing gear), two infection modes (fouling, water/sediment retention) and six frequently visited marine habitats (marina, mooring, farm, ramp, wharf, anchorage). Although invasion risk values determined using the FES approach was scenario-specific, general patterns were identified. Moored vessels consistently showed higher invasion risk values than trailered vessels. Invasion risk values were higher for anchorages, moorings and wharves. Similarly, hull-fouling was revealed as the highest infection risk mode after pooling results across all habitats. The NIS fuzzy expert system presented here appears as a valuable prioritising and decision-making tool for NIS research, prevention and control activities. Its easy implementation and wide applicability should encourage the development and application of this type of system as an integral part of biosecurity, and other environmental management plans.     

电化学强化低能耗废水生物处理技术研究

以碳布为阴阳极材料构建一种新型的生物电化学系统（BES）,研究该系统在不曝气条件下对城市污水的处理效果,并与传统的厌氧和好氧处理方法进行比较。结果表明,该BES处理城市污水是可行的,与传统曝气法相比能够显著降低能耗。在进水CODcr,为350mg／L、NH3-N为15mg／L、水力停留时间（HRT）为24h时,电化学强化生物处理系统对CODcr和NH3-N的去除率达84％和80％,优于同等条件下的厌氧、好氧生物处理方法。BES的输出电压最高为211mV。     

基于改进RPS的共因失效模型及在安全仪表系统中的应用研究

基于安全仪表系统共因失效机理的定性分析,在单一冲击下的RPS模型基础上,以泊松分布作为冲击的先验分布,建立了多冲击下考虑共因失效的安全仪表系统可靠性模型;采用基于专家经验和估计的方法,对模型参数进行估计;并通过定量分析确定出影响系统共因失效的最大冲击因子,为降低系统共因失效对可靠性的影响提供辅助决策支持。将改进的多冲击RPS模型的可靠性分析结果与β模型和PDS模型进行比较,验证了该模型的工程准确性。     

基于GIS的海洋底栖生物栖息密度空间插值方法

在地理信息系统即GIS的支持下,分别采用反距离加权(inverse distance weighted,IDW)、普通克里格(ordinary krig-ing,OK)、规则样条(regularize spline,RS)和张力样条(tension spline,TS)4种插值方法对2006年7月获得的大连湾底栖生物栖息密度的数据进行空间插值处理,并对插值结果的精确度进行交叉验证,分析和比较不同插值方法获得的分布图。结果表明,插值精确度普通克里格>反距离加权>张力样条>规则样条;4种方法均能较客观的模拟出底栖生物栖息密度的分布趋势,但是在整体趋势和局部趋势两方面的综合考虑下,普通克里格的表现效果更好。文章进一步指出,在确定站位数量及分布前提下,插值结果的精确度可以通过选择空间插值方法得以改善,但其根本还是取决于站位布置的数量和其分布合理性。     

模糊控制技术在污水处理中的应用

针对污水处理过程中采用传统的流量程序控制和时间程序控制的不足,提出了一种基于单片机的模糊控制方法。该方法以污水流量、溶解氧(DO)浓度和污泥回流比为主要被控对象,以DO浓度为主要控制参数,通过离散计算和在线查表的模糊推理方法可得到最佳的风机转速,使污水处理生化池内DO浓度保持在最佳状态,同时还通过控制曲线展示了当输入污水流量发生扰动时对DO浓度的控制精度,使污水处理质量保持稳定。通过实际应用表明,该控制方法不但能确保出口净化水水质达标,还可以节约15%的电能。     

Observed LATCH use and misuse characteristics of child restraint systems in seven states

INTRODUCTION: Although the LATCH System (Lower Anchors and Tethers for Children) holds the promise of simplifying the installation of a child restraint system (CRS) to the vehicle's seat, many drivers transporting young children have difficulties using this technology. This paper reports on an observation study of LATCH use and misuse. METHOD: Observations of approximately 1,000 children less than 5 years of age in CRSs, in the back seats of vehicles that were equipped with tether and lower anchors, in seven states. RESULTS: Tethers were used for 51% of the children when the forward-facing CRS had tether straps and the vehicle had tether anchors. Lower anchors were used for 58% of the children when the CRS had lower attachments and the vehicle had lower anchors. The most common tether and lower attachment misuses were loose tether straps (18% of cases) and loose lower attachment installation (30% of the cases), respectively. Vehicle safety belts were used in combination with lower attachments in 20% of all lower anchor installations. CONCLUSION: As more caregivers of young children drive vehicles equipped with LATCH, it will be important to promote the proper installation of CRSs using this technology. LATCH education messages must also emphasize that the lower anchors may not always be the safest choice for CRS attachment -- the safest attachment is the one that results in a tight fit and will be used correctly consistently.     

Pastoral farmland habitat diversity in south-east Ireland

In this study, habitat surveys were undertaken on 50 grass-based farms in SE Ireland and data digitised onto aerial photography. Additional data i.e. stocking rates, and participation (or otherwise) in the Irish Rural Environment Protection Scheme (REPS) were collected and analysed as possible explanatory variables for farm habitat composition.Results indicated that approximately 14.3% of the land area of sampled farms comprised of semi-natural habitat types, a proportion substantially greater than has been reported for many other European countries. The most frequently recorded semi-natural habitats included, field boundaries, scrub, and deciduous and riparian woodlands.Multivariate analysis of farm habitat configuration showed a strong dichotomy between dairy and non-dairy farming systems. Habitats such as intensively managed grassland and built ground were closely associated with dairy-based enterprises. In contrast, the incidence of other habitat types was associated with non-dairy and/or REPS participating enterprises. The ecological quality of field boundaries as assessed by the Field Boundary Evaluation and Grading System (FBEGS) Index was significantly greater on dairy, compared with dry-stock farms.This dichotomy in farm habitat composition is not reflected within current Agri-Environment (AE) policy. Integration of locally important drivers of habitat diversity into the design and implementation of AE policy, is integral to the successful performance of AE schemes.     

天津开发区供水系统地震反应分析

用天津开发区供水系统作为实例,研究了地震作用下该系统的震害,及震后供水功失效状态。实例研究表明,所采用的最新研制的供水系统地震反应分析软件（ＳＰＡＷＧＩＳ）是可靠的。同时还证明,该软件所基于的方法,包括震害预测专家系统及失效流分析等方法是正确的。