铁阳极电解脱色直接黄11染料模拟废水

研究采用铁为阳极电化学法处理直接黄11染料模拟废水脱色性能的影响进行研究。影响因素包括:电流密度、pH值、染料浓度和电解质浓度。研究结果表明,电流密度大有利于染料废水脱色,但能耗消耗大;初始溶液在中性条件下不仅取得很好的处理效果,而且脱色能耗较低;随着染料初始浓度增加脱色率和脱色能耗降低的趋势;随着电解质浓度升高染料脱色率下降的趋势,脱色能耗先减少,然后缓慢增大。在染料初始浓度50 mg/L、pH值为7.11、电流密度2.083 mA/cm2、电解质Na2SO4浓度0.01 mol/L、温度20℃、搅拌速度600 r/min、电解时间60min条件下,脱色率达到92.2%,脱色能耗1.709 kW.h/kg染料。     

城镇生活污水厂实行清洁生产途径分析

结合企业清洁生产理论,根据污水处理厂实际情况,从“节能、降耗、减排、增效”出发,详细阐述了污水厂实行清洁生产的途径。指出节约电能、新鲜水、药剂,减少污染物排放是污水处理厂清洁生产的主要出发点。并进行实例分析。     

城市污水培养好氧颗粒污泥的中试研究

以城市污水为处理对象,在中试SBR反应器中接种厌氧消化污泥,经过210 d运行,培养出了平均粒径在330μm的好氧颗粒污泥.实验表明,经过前3个月较低的进水有机负荷,反应器对污染物的去除效果逐步提高并达到稳定,活性污泥中与脱氮除磷相关的微生物大量富集.运行周期缩短为6 h,污泥的沉降性能和污染物去除特性保持良好,同时污泥平均粒径开始增大.好氧颗粒污泥完全形成以后,SVI值为30 mL.g-1,污泥浓度MLSS达到8.8 g.L-1,MLVSS/MLSS增至82%,氧利用速率OUR达到5.32 mg.(min.L)-1.颗粒外层以杆状菌为主,内层主要是球菌.单个周期内颗粒污泥对COD和总磷的去除率保持在90%,氨氮几乎完全去除,出水中无硝氮和亚硝氮累积,总氮的去除率达到80%,实现了良好的同步硝化反硝化和同步脱氮除磷效果.     

沼液复合型杀虫剂的田间应用试验研究

通过沼液复合型杀虫剂的田间应用试验,对各种沼液复合型杀虫剂的抗病防虫性能进行了深入研究.在大田应用条件下测试了沼液复合型杀虫剂的杀虫效果.结果表明,该沼液复合型杀虫剂对蚜虫的毒杀作用均比较明显.为了推进沼液复合型杀虫剂的商业化进程,提出便于其田间应用的各种最佳配比浓度,即BP01号、BP02号、BP03号、BP04号、BP05号沼液复合型杀虫剂抗病防虫性能最佳的配比分别为9 500倍液、26000倍液、11 667倍液、22 000倍液和13 333倍液.     

Kinetics of selective catalytic reduction of NO by NH3 on Fe-Mo/ZSM-5 catalyst

The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the presence of O2 was studied in this work. The results show that the observed reaction orders were 0.74-0.99, 0.01-0.13, and 0 for NO, O2 and NH3, respectively, at 350-450℃. And the apparent activation energy of the SCR was 65 kJ/mol on the Fe-Mo/ZSM-5 catalyst. The SCR mechanism was also deduced. Adsorbed NO species can react directly with adsorbed ammonia species on the active sites to form N2 and H2O. Gaseous O2 might serve as a reoxidizing agent for the active sites that have undergone reduction in the SCR process. It is also important to note that a certain amount of NO was decomposed directly over the Fe-Mo/ZSM-5 catalyst in the absence of NH3.     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².     

基于STIRPAT模型的能源消费碳足迹变化及影响因素——以江苏省苏锡常地区为例

定量研究经济社会发展对地区能源消费碳足迹的影响对区域实现低碳发展具有重要意义。论文计算了江苏省苏锡常地区1991-2008年能源消费碳足迹,采用岭回归函数对STIRPAT模型进行了拟合,采用脱钩指数分析了经济发展与能源消费碳足迹之间的关系。结果表明:①1991-2008年能源消费碳足迹平均增长速度为15.30%,能源消费碳足迹分配率以煤炭为主,石油所占比例呈波动下降趋势,天然气所占比例上升较快,能源消费碳足迹产值总体呈波动下降趋势;②经济增长是能源消费碳足迹的主要影响因素,两者关系模型拟合未出现环境库兹涅茨曲线;③经济增长与能源消费碳足迹之间处于相对脱钩与复钩的波动状态,从另一侧面验证了目前两者之间不存在库兹涅茨曲线假说的结论。     

污水地下渗滤系统强化脱氮试验研究

构建了3套以5%炉渣+95%草甸棕壤为基质的地下渗滤系统室内模拟试验装置,在水力负荷为0.1m3/(m2·d)条件下进行了生活污水处理试验.结果表明,当分流位置位于系统内110cm处,分流比为1:1时,可提高地下渗滤对总氮的去除效率,总氮的去除率由59.37%提高至68.41%,且对COD和总磷的去除效果没有影响.     

一体化接触氧化反应器处理景区生活污水

常州某旅游景区采用一体化生活污水处理装置处理该区生活污水,通过试验确定反应器的最佳工艺参数,研究表明采用接触氧化反应器处理农村污水,在反应器内溶解氧维持在2.0~4.0 mg/L,水力负荷为3.53 m3/(m3.d)的运行条件下,对COD、NH3-N及TN去除率分别达80.82%、69.12%、63.16%,出水可稳定达GB18918-2002《城镇污水处理厂污染物排放标准》一级标准。