浅谈爆破振动的控制措施

结合爆破振动的作用机理,分别对减少振源爆炸能量、干扰降振、阻断振动波传播途径、控制爆破规模、合理选择分段间隔时间等爆破振动主要控制措施进行了分析讨论。并根据实际施工情况分析了通过电子雷管实现干扰降振的减振效果,为类似工程提供借鉴作用。     

Are older drivers’ driving patterns during an on-road driving task representative of their real-world driving patterns?

Abstract

Objective: The current study investigated whether older drivers’ driving patterns during a customized on-road driving task were representative of their real-world driving patterns.

Methods: Two hundred and eight participants (male: 68.80%; mean age?=?81.52 years, SD?=?3.37 years, range?=?76.00–96.00 years) completed a customized on-road driving task that commenced from their home and was conducted in their own vehicle. Participants’ real-world driving patterns for the preceding 4-month period were also collected via an in-car recording device (ICRD) that was installed in each participant’s vehicle.

Results: During the 4-month period prior to completing the on-road driving task, participants’ median real-world driving trip distance was 2.66?km (interquartile range [IQR]?=?1.14–5.79?km) and their median on-road driving task trip distance was 4.41?km (IQR?=?2.83–6.35?km). Most participants’ on-road driving task trip distances were classified as representative of their real-world driving trip distances (95.2%, n?=?198).

Conclusions: These findings suggest that most older drivers were able to devise a driving route that was representative of their real-world driving trip distance. Future research will examine whether additional aspects of the on-road driving task (e.g., average speed, proportion of trips in different speed zones) are representative of participants’ real-world driving patterns.     

道路车辆电气及电子设备在振动试验中的应力循环和试验设计原则

本文试从振动试验的特点和受试样品承受振动激励的应力循环切入分析,为把握试验方案的拟订提供支持。同时也简要介绍了应力循环的计算方法,供试验人员参考使用。     

航空环境与机载设备环境试验规范的制定

本文简要介绍了航空环境中对流层、平流层、电离层、外大气层的基本环境及民用飞机机型的基本情况,对机载设备环境试验标准的选用及标准中提供的机载设备环境试验项目和应力等级的剪裁,归纳整理出了应考虑的因素：飞机舱内、舱外,飞机类型、飞机性能,并对每个试验项目的目的做了简要介绍。     

高压实新疆阿尔泰膨润土微观结构随吸力变化特征

采用压汞法(MIP)和扫描电镜(SEM)法,在自由和侧限状态下,试验研究了高压实新疆阿尔泰膨润土在不同吸力条件下的微观结构变化特征。吸力的控制采用了气相法和渗析(液相)法。研究结果表明:(1)低吸力范围内,自由膨胀和侧限条件下的高压实膨润土土水特征存在明显差异;(2)膨润土在自由和侧限状态下的水化过程中呈现出了截然不同的微结构变化特征。自由膨胀条件下,土的吸水膨胀量主要来自土中大孔隙的逐渐膨胀。侧限状态下,随着控制吸力的降低,膨润土的大孔隙逐渐被压缩,较小孔隙的数量不断增加,土中孔隙分布变得更加均匀。     

电子封装行业职业有害因素的辨识与分析

从电子封装行业工艺入手,依据国家颁布的职业有害因素分类目录及职业有害因素致病模型,针对电子封装行业插入式(DIP)及表面贴装(QFP/SOIC)制造工艺使用的材料、设备、条件、人员作业特点,对行业内具有共性的职业有害因素进行分析,对工艺过程中存在的职业有害因素作出辨识,并提出把硅粉尘、铅、氩气、高温、环氧树脂、氢氧化钾、噪声、酸雾、重复性静态作业、重复性动态作业等有害因素作为防控重点,为电子封装行业职业有害因素的危害量化评价及其防控措施制定提供了科学依据。     

城市电子废弃物资源化管理模式构想

通过对惠州市电子废弃物收集体系组成、去向以及电子废弃物处置方式的调查,分析惠州市电子废弃物收集和处置存在的一系列问题,结合实际提出了城市电子废弃物资源化管理模式的初步构想。     

A LARGE ELECTRONIC WEIGHING LYSIMETER SYSTEM: DESIGN AND INSTALLATION1

ABSTRACT: To measure crop evapotranspiration, a large double tank, electronic weighting lysimeter system was designed and installed at the Shahid Bahonar University farm, Kerman, Iran. The system was installed in a 50 m² underground building. It includes two tanks of 3.00 m in diameter and 1.75 m deep. The weighing mechanism for each tank is a set of three compression strain gage load cells, which are fixed on 1.20 m height column above the floor. According to the specification of the load cells, the maximum possible weighing error may be about 0.01 percent of total mass, which is equivalent to 0.28 mm of water, but the measured error was equal to 1 kg mass, which is equivalent to 0.14 mm of water. The load cell data from each tank and the on‐site environmental data (temperature, humidity, and wind velocity and direction) are automatically recorded and saved in a personal computer hard disk for further use and analysis.     

电子垃圾重金属污染及防治对策研究

随着信息产业的飞速发展,电子产品更新换代加速,电子垃圾飞速增长,电子垃圾中的重金属对环境造成了越来越严重的污染.本文回顾了广东贵屿与浙江台州两大电子垃圾回收拆解区重金属污染的现状,分析了电子产品原材料、加工工艺和电子垃圾不当回收导致重金属污染的原因,提出了依靠政策法规引导、借鉴国外先进经验、进行电子垃圾回收处理产业化发展的相应防治对策,以期能改善电子垃圾导致的重金属污染.     

Two decades,three WEEE systems: How far did EPR evolve in Korea's resource circulation policy?

Extended producer responsibility (EPR) has become a dominant policy paradigm for the management of waste electrical and electronic equipment (WEEE) in the last two decades. In South Korea the principle has guided the evolution of the resource circulation policy even before its official introduction through a revision of the recycling law in 2002. Elements of producer responsibilities could be found in the producer-based deposit refund system (DRS) a decade earlier and they were strengthened through the enactment of a new resource circulation law in 2008. This article reviews the policy changes in South Korea for the management of WEEE during the past 20 years. The focus of the analysis is on the impacts of EPR and the producers’ responses that were expressed through the quantity and the quality of material flows in the society. The findings are discussed in light of international experiences in order to outline measures to improve the effectiveness of the EPR-based resource circulation policy that could have broader implications beyond the case study.