电子垃圾中铅污染及对策研究

伴随着电子信息等高科技产业的快速发展,电子垃圾已成为增长速度最快的固体废弃物。电子垃圾成分复杂且其污染物众多,尤其是其中的铅污染对环境与健康的影响越来越受到人们的关注,对电子垃圾的不恰当处理势必造成了严重的环境污染。本文调研分析了中国电子垃圾中铅元素污染的现状,探讨了铅污染的原因及其防治对策,并对各种对策的可操作性进行了评价。另一方面,借鉴国外先进经验,对中国电子垃圾中铅元素的污染防治提出了建议。     

电子废弃物中持久性有机污染物分析检测方法的研究进展

针对目前电子废弃物中持久性有机污染物(POPs)尚未形成有效快速分析检测方法的问题,介绍了溶剂萃取、固相萃取、微波萃取和超临界流体萃取等POPs前处理技术的研究进展,总结了POPs的分析方法,如:气相色谱、液相色谱、气相色谱-质谱法、高分辨率气相色谱-高分辨质谱法等化学分析方法,以及生物传感器测定法、表面胞质团共振检测法、酶联免疫检测法等生物分析方法。分析了各方法的优劣,并提出了展望。     

高温分解及烟气净化处理电子垃圾的技术和设备

提出高温分解及烟气净化处理废弃电子垃圾的技术。通过喷水系统调节分解炉内气氛,控制有机物分解速度,使有机物裂解成二氧化碳和水蒸气,有害成份经净化系统再次处理后达到环保排放标准。金属部分可进一步进行提炼回收,实现有机物和金属的绿色分离。     

废弃电器电子产品POPs/PTS减排环境管理实践研究

全球环境基金(GEF)"通过环境无害化管理减少电器电子产品的生命周期内持久性有机污染物和持久性有毒化学品(POPs/PTS)的排放全额示范项目"湖北省作为项目示范省之一.三家废弃电器电子产品拆解企业,分别开展了废弃电器电子产品拆解技术示范、湿法废弃印刷电路板处置BAT/BEP技术示范、利用再生铅连续熔炼炉协同处置阴极射线管含铅锥玻璃项目技术示范.电子废弃物全自动化分类与拆解生产线,为电子废弃物绿色循环与资源化提供了示范模式.     

Catalytic activity of noble metal nanoparticles toward hydrodechlorination: influence of catalyst electronic structure and nature of adsorption

In this study, stabilized Pd, Pt and Au nanoparticles were successfully prepared in aqueous phase using sodium carboxymethyl cellulose (CMC) as a capping agent. These metal nanoparticles were then tested for catalytic hydrodechlorination toward two classes of organochlorinated compounds (vinyl polychlorides including trichloroethylene (TCE), tetrachloroethylene (PCE), and alkyl polychlorides including 1,1,1-trichloroethane (1,1,1-TCA), and 1,1,1,2-tetrachloroethane (1,1,1,2-TeCA)) to determine the rate-limiting steps and to explore the reaction mechanisms. The surface area normalized reaction rate constant, k_SA, showed a systematic dependence on the electronic structure (the density of states at the Fermi level) of the metals, suggesting that adsorption of organochlorinated reactants on the metal catalyst surfaces is the rate-limiting step for catalytic hydrodechlorination. Hydrodechlorination rates of 1,1,1-TCA and 1,1,1,2-TeCA agreed with the bond strength of the first (weakest) dissociated C-Cl bond, suggesting that C-Cl bond cleavage, which is the first step for dissociative adsorption of the alkyl polychlorides, controlled the catalytic hydrodechlorination rate. However, hydrodechlorination rates of TCE and PCE correlated with the adsorption energies of their molecular (non-dissociative) adsorption on the noble metals rather than with the first C-Cl bond strength, suggesting that molecular adsorption governs the reaction rate for hydrodechlorination of the vinyl polychlorides.     

典型电子废物中多溴联苯醚的模拟浸出释放特征

选取废旧打印机外壳为典型电子废物,以商用腐殖酸溶液为浸提剂,采用浸出试验,模拟研究了废旧打印机外壳中PBDEs(多溴联苯醚)在简易填埋或与生活垃圾共处置场景下,在不同废物粒径、浸提剂DOC浓度、pH、浸提时间和液固比下的浸出特征. 分别用索氏提取法和液液萃取法提取废旧打印机外壳及其浸出液中的PBDEs,采用气相色谱-质谱法(GC-MS)对11种PBDEs同系物的浓度进行定性、定量检测. 结果表明,废旧打印机外壳中BDE28、BDE47、BDE66、BDE85、BDE99、BDE100、BDE153、BDE154被检出,而在浸出液中仅有BDE28、BDE47、BDE66、BDE85、BDE99、BDE153被检出,∑₆PBDEs的浸出率仅为0.04%~0.44%;垃圾渗滤液和土壤溶液中DOM可以促进废旧打印机外壳中PBDEs的浸出,随着浸提剂ρ(DOC)的增大,PBDEs的浸出量增加;在酸性条件下PBDEs的浸出量低于在中性条件下的浸出量;随着浸出时间的延长,PBDEs的浸出量不断增加,但在试验设定的480h内,没有得到一个液固体系的平衡时间,可见废旧打印机外壳中PBDEs的浸出是一个缓慢释放的过程.      

电子废物管理体系研究

分析了欧盟、日本、美国等国家的电子废物管理体系主要特点,并介绍我国电子废物管理现状和主要措施,在此基础上归纳总结了当前电子废物管理存在的主要问题并提出相关建议。     

居民电子废物回收行为影响因素的实证研究

基于对350名城市居民的问卷调查结果,运用验证性因子分析方法对居民的电子废物回收行为、行为意向及其影响因素进行了实证研究.结果表明,基于计划行为理论所建立的结构方程模型可以较为有效地诠释有关研究假设,环境知识、舆论宣传和垃圾分类等情境因素对电子废物回收行为具有调节作用.知觉行为控制对于行为意向转化为行为具有非常重要地促进作用,而便利状况则是影响知觉行为控制的重要因素.     

Success factors and barriers in re-use of electrical and electronic equipment

This paper aims to identify specific and generic success factors and barriers in the re-use of electrical and electronic equipment for a variety of different operating models. The scope of the study is information and communication technologies (ICT) and large household appliances. Success factors and barriers for re-use were identified through the conducting of semi-structured interviews with 28 case study partners representing the different models. A list of generic success factors and barriers was identified. From this generic list, the re-use success factors and barriers were ranked by the interviewees with regards to their importance. On the one hand, the difficulty in accessing sufficient volumes of good quality used equipment and the lack of legislations, which support, incentivize and – if necessary – enforce this access, were identified as most impactful barriers. On the other hand, the control and securing of product and process quality were ranked as most important success factors. Re-use organisations, which adhere to good re-use practices, differentiate themselves through quality guarantee from non-compliant, informal competitors. Moreover, proven quality strengthens confidence in re-use of important stakeholders like suppliers, customers, authorities and the general public. Differences in reuse barriers and success factors were also explored for varying geographical regions, product category and operating models.     

废旧电脑拆解工艺与资源化案例研究

以某再生资源公司的废旧电脑拆解为案例进行研究,介绍了工艺技术、拆解回收各种资源的数据。研究结果表明,我国废旧电脑人工拆解-破碎-冶炼相结合的工艺,是电子废弃物循环利用、资源高效回收、减少环境风险的较好工艺技术,符合固废处理的3R(替代、减少、优化)原则。