Co-pyrolysis of swine manure with agricultural plastic waste: Laboratory-scale study

Manure-derived biochar is the solid product resulting from pyrolysis of animal manures. It has considerable potential both to improve soil quality with high levels of nutrients and to reduce contaminants in water and soil. However, the combustible gas produced from manure pyrolysis generally does not provide enough energy to sustain the pyrolysis process. Supplementing this process may be achieved with spent agricultural plastic films; these feedstocks have large amounts of available energy. Plastic films are often used in soil fumigation. They are usually disposed in landfills, which is wasteful, expensive, and environmentally unsustainable. The objective of this work was to investigate both the energetics of co-pyrolyzing swine solids with spent plastic mulch films (SPM) and the characteristics of its gas, liquid, and solid byproducts. The heating value of the product gas from co-pyrolysis was found to be much higher than that of natural gas; furthermore, the gas had no detectable toxic fumigants. Energetically, sustaining pyrolysis of the swine solids through the energy of the product gas could be achieved by co-pyrolyzing dewatered swine solids (25% m/m) with just 10% SPM. If more than 10% SPM is used, the co-pyrolysis would generate surplus energy which could be used for power generation. Biochars produced from co-pyrolyzing SPM and swine solid were similar to swine solid alone based on the surface area and the ¹H NMR spectra. The results of this study demonstrated the potential of using pyrolysis technology to manage two prominent agricultural waste streams (SPM and swine solids) while producing value-added biochar and a power source that could be used for local farm operations.     

Pyrolysis of waste animal fats in a fixed-bed reactor: Production and characterization of bio-oil and bio-char

Several animal (lamb, poultry and swine) fatty wastes were pyrolyzed under nitrogen, in a laboratory scale fixed-bed reactor and the main products (liquid bio-oil, solid bio-char and syngas) were obtained. The purpose of this study is to produce and characterize bio-oil and bio-char obtained from pyrolysis of animal fatty wastes. The maximum production of bio-oil was achieved at a pyrolysis temperature of 500 °C and a heating rate of 5 °C/min. The chemical (GC–MS analyses) and spectroscopic analyses (FTIR analyses) of bio-oil showed that it is a complex mixture consisting of different classes of organic compounds, i.e., hydrocarbons (alkanes, alkenes, cyclic compounds…etc.), carboxylic acids, aldehydes, ketones, esters,…etc. According to fuel properties, produced bio-oils showed good properties, suitable for its use as an engine fuel or as a potential source for synthetic fuels and chemical feedstock. Obtained bio-chars had low carbon content and high ash content which make them unattractive for as renewable source energy.     

Comparative analysis of anaerobically digested wastes flow properties

The flow curve of anaerobically digested wastes from different origins was determined through rheological measurements. Regardless of their origin, samples can be divided into two families: simple non-Newtonian liquids well modelled by basic power law below 10%DC and viscoelastic liquids with a yield stress, well modelled by a Herschel–Bulkley model above. In all the cases, the rheological behaviour is driven by both the organic content and the volatile fraction (organic content/solid content), indicating that anaerobic digestion tends to smooth the rheological characteristics of organic wastes, whichever their origins.     

四川省“三废”排放为代表的环境状况分析

对“三废”排放情况为代表的环境状况和变化趋势进行研究和阐述。简要地介绍了评价指标体系的选择原则,并利用2003-2010年四川省“三废”排放统计数据,建立了废水、废气和固废为要素的环境状况评价体系,绘制了环境状况变化趋势图。总体来看,以“三废”为代表的环境状况呈现变好的趋势。     

中国电子垃圾危害与处理技术研究

作为信息产业迅速发展的产物,大量的电子垃圾对环境和社会的可持续发展带来了越来越多的影响。小作坊式的家庭处理方式,使电子垃圾不仅带来环境污染,同时还存在着严重的安全隐患,并且还造成资源的浪费。电子垃圾被填埋或者焚烧时,其中的重金属造成当地土壤和地下水的污染;有机物经过焚烧,释放出大量的有害气体,对自然环境和人体造成危害。针对电子垃圾的处理情况,综述了几种目前常用的电子垃圾处理技术,并对其优缺点进行了总结。     

乡镇垃圾综合利用途径分析研究

社会主义新农村建设推动了乡镇经济的发展,但乡镇的环境问题并没有随之解决,而固体废弃物的综合利用成为解决当前乡镇环境问题的有效手段之一。乡镇垃圾现状分析表明,其组分以有机易腐成分为主．不适用于城市垃圾的处理方式。乡镇垃圾经合理分类,其综合利用的主要途径有三条,包括可回收垃圾一回收一循环再利用,有机垃圾制肥-肥料-回田,餐厨垃圾、人畜粪便、秸秆等有机垃圾厌氧发酵-沼气-热能或电能。该途径可最终实现乡镇垃圾的资源化和能源化。     

军用电子设备的防雷措施研究

近年来,随着微电子技术和计算机网络在军用装备上的日益普及,雷电带来的危害和经济损失大大增加,仅依靠避雷针防雷己远远达不到电子、微电子、通信等设备的实际防雷需求。分析了雷电灾害对电子设备的危害,并针对目前军用电子设备的防雷现状提出了综合防雷措施。     

广东省电子废物回收处理体系建设对策研究

广东省的电子废物产生量大,亟须建立规范的回收处理处置体系,实现资源的有序回收利用,避免电子废物的不当拆解处理造成环境污染。针对广东省电子废物回收处理的现状和存在问题,提出建设规模化的集中处理体系,产业化的回收利用体系和规范化的统一监管体系的相关对策,以促进电子废物的无害化、减量化和资源化处理处置。     

微波消解-火焰原子吸收分光光度法测定固体废物中的钡

采用微波消解法对固体废物浸出液样品进行前处理,采用乙炔-空气火焰原子吸收法测定钡的含量,检出限为2．04mg／L,加标回收率为94．5％,精密度为4．85％-6．81％。     

基于功能仿真的电子产品性能退化分析方法

目的研究基于功能仿真对电子产品长期工作过程中性能退化问题进行分析的方法。方法以DC-DC电源模块为对象,一种方式是直接对电源模块进行加速退化试验,并基于试验数据进行可靠性分析;另一种方式是对电源模块中性能退化关键元器件进行加速退化试验,并将试验数据模型注入到电源模块功能仿真模型中,进行性能退化仿真与可靠性分析,最终对两种分析结果进行对比,验证仿真分析技术的有效性。结果对比显示,加速退化试验分析得到的电源模块平均寿命为281 560 h,仿真分析得到的电源模块平均寿命为357 290 h。结论由于仿真分析方法只考虑了性能退化的关键元器件,结果偏乐观,但是偏差在合理的范围内,证明该方法对于性能退化可靠性分析是有效的,并且应用该方法更便于进行设计改进和迭代分析。