Cybersecurity and dynamic operation in practice: Equipment impacts and safety guarantees

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid dynamics and finite element analysis simulations to analyze how cyberattacks on control systems could impact a metric for stress in equipment (maximum Von Mises stress) over time. Subsequently, we develop reduced-order models showing how both a process variable and maximum Von Mises stress vary over time in response to temperature variations at the boundary of the equipment, to use in evaluating how advanced control frameworks might impact and consider the stress. We close by investigating options for obtaining parameters of an economic model predictive control design that would need to meet a variety of theoretical requirements for safety guarantees to hold. This provides insights on practical safety aspects of control theory, and also indicates relationships between control and design from a safety perspective that highlight further relationships between design and control under dynamic operation to deepen perspectives from the computational fluid dynamics and finite element analysis discussions.     

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Sodium is the main cooling medium in the circuit of fourth-generation nuclear reactors, and its leakage constitutes a severe fire hazard because of its high chemical activity. In this study, expandable graphite (EG), which is a traditional sodium fire-extinguishing agent, was modified with zinc borate (ZB) as an intercalator, and the modified EG_ZB was characterized. Moreover, the effectiveness of the modified EG_ZB in extinguishing sodium fires was tested using a self-developed fire-extinguishing experimental device. This study's results indicated that EG, EG_ZB had a smaller particle size, higher thermal stability, higher fire-extinguishing speed, and lower powder mass consumption than EG. During the fire-extinguishing process, ZnO decomposed by ZB captured free radicals and inhibited the combustion reaction. Furthermore, B₂O₃ was adsorbed on the surface of the EG layer, which strengthened covering and asphyxiation. The findings of this study provide crucial information for effectively controlling fires caused by active metals and metallo-organic compounds.     

盐雾试验方墨探讨

分析了不同盐雾试验方法标准对盐溶液配制、试样的处理和检测、试验参数、试验过程控制等方面的不同要求,探讨了盐雾试验的操作技术,提出了必须严格控制盐雾试验过程的建议和不能用不同标准进行的盐雾试验结果进行比较的观点.     

珠江三角洲机动车排放控制措施协同效应分析

预测了2015年珠江三角洲机动车空气污染物和温室气体排放量,设计了6类单一控制、技术控制、结构控制以及综合控制措施的情景,并运用基准线年排放清单编制和协同效应坐标系法分析了污染物与温室气体减排的协同效应.结果表明,按目前机动车保有量增长趋势,2015年污染物和温室气体将以18%~120%的幅度增加;各控制措施下污染物和温室气体排放量均有下降,且均具有正向的协同效应,但减排的贡献差异较大.6类单一控制措施中淘汰黄标车和结构性控制措施分别对各污染物和温室气体的削减效果最明显,减排幅度均在40%以上,且正向协同效应突出,但相比其他措施,结构性控制措施实施难度大.     

农村环境污染控制区划方法与应用研究

针对农村环境污染发生的广域性、分散性和随机性等特征,采用清单分析法,核算了农村环境污染物COD、TN、TP排放量和排放浓度,并以环境污染敏感性评价和污染类型划分为研究基础,探讨了农村环境污染控制区划方法,提出了区划原则、分区方法和命名方法.采用上述方法,在江苏省进行了应用研究,将江苏省农村环境污染控制区共划分为3个一级区和13个二级区,对不同级区实施分区管理和分类控制,分区结果可以为农村环境污染控制决策提供科学依据.     

Evaluation of mercury speciation and removal through air pollution control devices of a 190 MW boiler

Air pollution control devices (APCDs) are installed at coal-fired power plants for air pollutant regulation. Selective catalytic reduction (SCR) and wet flue gas desulfurization (FGD) systems have the co-benefits of air pollutant and mercury removal. Configuration and operational conditions of APCDs and mercury speciation a ect mercury removal e ciently at coal-fired utilities. The Ontario Hydro Method (OHM) recommended by the U.S. Environmental Protection Agency (EPA) was used to determine mercury speciation simultaneously at five sampling locations through SCR-ESP-FGD at a 190 MW unit. Chlorine in coal had been suggested as a factor a ecting the mercury speciation in flue gas; and low-chlorine coal was purported to produce less oxidized mercury (Hg2+) and more elemental mercury (Hg0) at the SCR inlet compared to higher chlorine coal. SCR could oxidize elemental mercury into oxidized mercury when SCR was in service, and oxidation e ciency reached 71.0%. Therefore, oxidized mercury removal e ciency was enhanced through a wet FGD system. In the non-ozone season, about 89.5%–96.8% of oxidized mercury was controlled, but only 54.9%–68.8% of the total mercury was captured through wet FGD. Oxidized mercury removal e ciency was 95.9%–98.0%, and there was a big di erence in the total mercury removal e ciencies from 78.0% to 90.2% in the ozone season. Mercury mass balance was evaluated to validate reliability of OHM testing data, and the ratio of mercury input in the coal to mercury output at the stack was from 0.84 to 1.08.     

大气自净能力指数的气候特征与应用研究

为了定量地评估污染气象条件对空气污染的作用并实现对空气污染潜势的预报,本文在城市大气污染数值预报系统（CAPPS）预报原理的基础上,定义了大气自净能力指数,并分别给出了采用气象站观测资料和通过数值模拟计算大气自净能力指数的方法.基于气象站观测资料的全国大气自净能力指数分析计算表明,全国大气自净能力最差的地区分布在四川盆地和新疆塔里木盆地,大气自净能力最强的地区分布在青藏高原、蒙古高原、云贵高原、以及东北平原和三江平原、山东半岛和海南岛;1961~2017年,京津冀、长三角和珠三角地区的大气自净能力指数呈下降的变化趋势,全年低自净能力日数呈上升的变化趋势.采用大气自净能力指数评估2014年北京APEC会议期间大气污染防控效果,表明在11月8~10日极端不利扩散气象条件发生时,减排措施使北京市空气质量AQI平均降低77%,使京津冀平原地区11个城市的空气质量AQI平均降低37%.基于国家气候中心月动力延伸气候预测模式（DERF2.0）的预报产品和中尺度模式（WRF）,建立了可以预测全国未来40d逐日大气自净能力指数的延伸期-月尺度大气污染潜势预测系统,回报实验表明,在大多数情况下可以提前15d预报出大气重污染过程;月尺度的大气重污染过程预报效果更大程度上取决于月动力延伸气候预测模式（DERF2.0）的预报准确率.     

基于排污许可的环境标准制度改革完善研究

排污许可制度是固定点源环境管理的基础核心制度,政府以排污许可证为载体,对固定污染源的污染物排放限值、排污行为等进行许可,以排放标准的要求作为基本依据,并以环境质量标准为依据,对非达标区实施更为严格的排污许可限制。然而,现有的部分行业排放标准由于制定时间较早、科学技术支撑方法不足、与环境质量改善难以挂钩等问题,难以满足新排污许可证制度改革要求。本文在研究现行环境标准体系对排污许可制度的支撑作用与相互关系的基础上,研究了基于排污许可制的排放标准存在的主要问题,并以健全排污许可制度的环境标准支撑为目的,提出了现行环境标准体系的完善和修订建议。     

移动基站远场区功率密度分布和规划控制距离

为掌握畸变条件下移动通讯基站周围功率密度分布,合理确定其规划控制距离,在杭州市主城区选取具有不同网络类型和载波数的2057个移动基站,实测话务高峰期基站周围射频场功率密度.结果表明,畸变条件下GSM基站远场区功率密度S∝r-1.83 (非畸变条件下S∝r-2),决定系数R2=0.80;距基站天线20m内,约85.91%测点功率密度实测值小于非畸变条件下依据天线标称功率和增益计算的理论值.,频数统计结果表明,距天线1~15m范围内,运营商A所属基站S10值(表示有10%的测点功率密度高于该值)比运营商B高10.00%;距天线1~30m内,双网和三网共站基站S10值分别比单网基站高50.31%和57.10%.移动通讯基站规划控制距离以15m为宜,15m外测点功率密度值超过8μW/cm2的基站只占所测基站的0.11%.     

京津冀地区主要排放源减排对PM2.5污染改善贡献评估

研究选取2012年1月和7月作为冬夏两季代表时段,利用CMAQ/2D-VBS模型分析了冬夏两季京津冀地区主要排放源减排30%对改善区域PM_(2.5)污染的效果.结果表明,工业源对PM_(2.5)污染的贡献最大,其次是民用源,但工业源单位减排量贡献低于民用源,交通源和电厂源的整体贡献和单位减排量贡献均较小.工业部门内贡献最大的为钢铁冶金行业,其次是水泥、工业锅炉、炼焦、石灰砖瓦和化工行业.与各部门各物种排放量的比较反映出各排放源贡献大小与其一次PM_(2.5)排放水平高度相关.因京津冀地区冬季NO_x减排对PM_(2.5)形成的促进作用,以及冬季较弱的大气垂直扩散作用,各排放源夏季减排比冬季普遍更有效,交通源、电厂源以及工业源中的水泥、工业锅炉和石灰砖瓦行业夏季减排效果相比冬季优势明显.民用源由于采暖季排放较高而冬季贡献更明显,农业源因秸秆开放燃烧量大,冬季单位减排量贡献十分显著.从同等幅度减排考虑,应将工业源作为控制重点,优先控制其一次PM_(2.5)排放,在部门内进一步重点控制钢铁冶金行业的NO_x和SO_2排放、水泥行业的夏季NO_x排放以及炼焦行业的SO_2和NMVOC排放.民用源排放应着重在冬季采暖期控制.