高压聚乙烯反应单元火灾爆炸危险性分析及预防

运用道化学公司火灾爆炸危险指数评价（第7版）方法,针对管式法高压聚乙烯生产工艺的特点,计算分析安全措施补偿后的火灾爆炸指数,分析总结其火灾危险性,并提出了一些具体的防火防爆措施。     

不同氧化法对模拟聚合物驱废水降黏效果的影响

分别采用UV-Fenton试剂氧化法、次氯酸钙氧化法和二氧化氯氧化法处理模拟聚合物驱废水,考察了各工艺条件对废水降黏效果的影响。实验结果表明:在初始废水pH为7、反应温度为50℃、反应时间为20 min的条件下,UV-Fenton试剂氧化法适宜的H2O2加入量为1 mmol/L,n(H2O2)∶n(Fe2+)=10,处理后废水降黏率达65.7%;次氯酸钙氧化法适宜的次氯酸钙加入量为500 mg/L,处理后废水降黏率达81.7%;二氧化氯氧化法适宜的二氧化氯加入量为100 mg/L,处理后废水降黏率为40.9%。3种氧化法对模拟聚合物驱废水的降黏率大小顺序为:次氯酸钙氧化法>UV-Fenton试剂氧化法>二氧化氯氧化法。     

含有机胂化工废水治理实践

介绍运用Fenton试剂氧化法和石灰中和铁盐沉淀法处理含有机胂化工废水实践,具有一定实用价值。     

纳氏试剂比色法测定土壤铵态氮的研究

进行了用纳氏试剂比色法测定土壤中铵态氮的实验。试验表明,入射光波长在390±10nm范围内,方法的灵敏度较高;用酒石酸钾钠-氢氧化钠溶液作为掩蔽剂,可排除土壤中钙、镁等金属离子对测定的干扰。并且对氢氧化钠用量、显色剂用量进行试验,以用20%氢氧化钠溶液1.5mL,纳氏试剂0.5mL为适宜测定条件。方法检出限为0.049mg/L,定量下限为0.098mg/L。     

Fe2O3@SCe多相芬顿催化剂的制备及其降解放热性能

为研究多相Fenton体系降解有机污水过程的放热规律,为污水处理的能源化利用提供技术支撑,本文以半焦（SCe）为载体,制备了Fe₂O₃@SCe新型复合材料,并对复合材料进行了BET、FTIR、XRD、SEM表征,研究了Fe₂O₃@SCe/H₂O₂多相Fenton体系处理邻苯二胺（OPD）模拟废水的降解性能和放热规律.结果表明,Fe₂O₃均匀负载于SCe颗粒表面,Fe₂O₃@SCe复合材料保留了改性SCe的多孔形态和强吸附性,在3.1~8.9的pH值范围内均表现出较高的催化活性;Fe₂O₃@SCe/H₂O₂多相Fenton体系在去离子水中自身分解和在邻苯二胺模拟废水的降解反应都释放了大量的热量,在[OPD]= 0.04mol/L;pH=7.8;T₀=30℃;[H₂O₂]=0.25mol/L;[Fe₂O₃@Sce]=533g/L;t=180min反应条件下的溶液温度升高数值为7.1℃,降解率为88.2%; H₂O₂的投加浓度是影响反应放热量的主要因素.     

A Cost‐Effective Laser Scanning Method for Mapping Stream Channel Geometry and Roughness

This brief pilot study implements a camera‐based laser scanning system that potentially offers a viable, cost‐effective alternative to traditional terrestrial laser scanning (TLS) and LiDAR equipment. We adapted a low‐cost laser ranging system (SICK LSM111) to acquire area scans of the channel and bed for a temporarily diverted stream. The 5 m × 2 m study area was scanned at a 4 mm point spacing which resulted in a point cloud density of 5,600 points/m². A local maxima search algorithm was applied to the point cloud and a grain size distribution of the stream bed was extracted. The 84th and 90th percentiles of this distribution, which are commonly used to characterize channel roughness, were 90 mm and 109 mm, respectively. Our example shows the system can resolve both large‐scale geometry (e.g., bed slope and channel width) and small‐scale roughness elements (e.g., grain sizes between about 30 and 255 mm) in an exposed stream channel thereby providing a resolution adequate for the estimation of ecohydraulic roughness parameters such as Manning's n. While more work is necessary to refine our specific field‐deployable system's design, these initial results are promising in particular for those working on a limited or fixed budget. This opens up a realm of laser scanning applications and monitoring strategies for water resources that may not have been possible previously due to cost limitations associated with traditional TLS systems.     

芬顿试剂与DDBAC联合调理污泥的工艺优化

研究了不同pH值下芬顿试剂(H2O2/Fe2+)与表面活性剂(DDBAC)联合调理对污泥脱水性能的影响,以污泥滤饼含水率(WC)和毛细吸水时间(CST)作为评价指标进行单因素试验,得出pH值以及药剂投加量最佳范围.然后通过以响应曲面优化法(RSM)为依据的Box-Behnken试验,建立了WC和CST减少率二次多项式预测模型,进而得到各影响因素的最优值.结果表明,联合调理过程中pH=3.91,H2O2、Fe2+和DDBAC的投加量分别为47.60, 38.60, 58.20mg/g时, WC降至60.26%, CST减少率升至89.89%, 污泥脱水性能明显改善.同时,在最优条件下进行了验证试验,试验结果与模型预测值基本吻合,表明基于响应曲面法所得的最佳工艺参数准确可靠,对相关污泥处理及条件优化具有一定的指导意义.     

电Fenton法处理难降解有机物的研究进展

评述了电Fenton法在水处理的中的应用状况及国内外研究现状，介绍了各种电Fenton法进行机理及存在的优缺点，并对其今后的发展趋势进行了阐述。     

Fenton氧化对硝基苯酚过程中Fe2+/Fe3+的氧化还原机制

Fenton降解对硝基苯酚(PNP)过程中,Fe2+经历一个快速氧化后快速还原,最后在高浓度水平上保持稳定的变化过程。通过分析中间产物的变化过程,发现有机中间产物氢醌和苯醌构成一对氧化还原体系催化Fe3+向Fe2+的转化,本研究从Fe2+/3+转化机制的角度进一步明确了Fenton降解PNP的机理。     

Conditioning of sewage sludge by Fenton's reagent combined with skeleton builders

Physical conditioners, often known as skeleton builders, are commonly used to improve the dewaterability of sewage sludge. This study evaluated a novel joint usage of Fenton’s reagent and skeleton builders, referred to as the F-S inorganic composite conditioner, focusing on their efficacies and the optimization of the major operational parameters. The results demonstrate that the F-S composite conditioner for conditioning sewage sludge is a viable alternative to conventional organic polymers, especially when ordinary Portland cement (OPC) and lime are used as the skeleton builders. Experimental investigations confirmed that Fenton reaction required sufficient time (80 min in this study) to degrade organics in the sludge. The optimal condition of this process was at pH = 5, Fe²⁺ = 40 mg g⁻¹ (dry solids), H₂O₂ = 32 mg g⁻¹, OPC = 300 mg g⁻¹ and lime = 400 mg g⁻¹, in which the specific resistance to filtration reduction efficiency of 95% was achieved.