红枫湖钻孔沉积物中滴滴涕的沉积记录

采用GC/MS方法分析了红枫湖钻孔沉积物中滴滴涕的垂直分布状况,并对其来源和生态风险进行了分析和评估.红枫湖钻孔沉积物中滴滴涕的含量介于7.6～23.7ng/g之间,且从底层至表层基本上呈下降的趋势.其中,1981～1983年间有一个急剧下降的过程,随后基本上呈缓慢下降的趋势.沉积物中滴滴涕的组成以p,p′-DDTs(p,p′-DDT、p,p′-DDE和p,p′-DDD的总和)为主,p,p′-DDTs与o,p′-DDTs(o,p′-DDT、o,p′-DDE和o,p′-DDD总和)的比值在5.1～8.4之间,说明沉积物中的滴滴涕主要来源于农药滴滴涕的残留.又因为沉积物中残留的滴滴涕是以它的代谢产物为主,DDT/(DDD+DDE)的比值为0.31～0.84,所以沉积物中的滴滴涕主要源于历史的残留.此外,DDT/(DDD+DDE)和DDE/DDD比值的垂直变化特征显示,尽管我国1983年就禁止了滴滴涕在农业上的使用,但直至1990年前后,红枫湖流域内仍存在滴滴涕使用的可能.风险评价的结果显示,红枫湖表层沉积物中DDE、DDD、DDT和DDTs的含量均介于ERL和ERM值之间,可能造成潜在的生态风险,因此红枫湖沉积物中滴滴涕的污染仍值得密切关注.     

Sedimentary record of polycyclic aromatic hydrocarbons in Lake Erhai, Southwest China

The temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in a sediment core from Lake Erhal in Southwest China using gas-chromatography/mass spectrometry (GC/MS) method.The total organic carbon (TOC) normalized total PAHs concentrations (sum of US Environmental Protection Agency proposed 16 priority PAHs) ranged from 31.9 to 269 μg/g dry weight (dw),and were characterized by a slowly increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments.The PAHs in the sediments were dominated by low molecular weight (LMW) PAHs,suggesting that the primary source of PAHs was low- and moderate temperature combustion processes.However,both the significant increase in high molecular weight (HMW) PAHs in the upper sediments and the vertical profile of diagnostic ratios pointed out a change in the sources of PAHs from low-temperature combustion to high-temperature combustion.The ecotoxicological assessment based on consensus-based sediment quality guidelines implied that potential adverse biological impacts were possible for benzo(ghi)perylenelene and most LMW PAHs.In addition,the total BaP equivalent quotient of seven carcinogenic polycyclic aromatic hydrocarbons (BaA,CHr,BbF,BkF,BaP,DBA and INP) was 106.1 ng/g,according to the toxic equivalency factors.Although there was no great biological impact associated with the HMW PAlls,great attention should be paid to these PAH components based on their rapid increase in the upper sediments.     

废旧锌锰电池生物淋滤-水热法制备纳米锰锌铁氧体

以氧化硫硫杆菌(A.thiooxidans)和氧化亚铁钩端螺旋菌(L.ferrooxidans)为混合淋滤菌株对废旧锌锰电池进行了生物浸提,并以获取的淋滤液为前驱体,采用水热法制备出系列锰锌铁氧体软磁材料(Mn_(1-x)Zn_xFe_2O_4,x=0.2~0.8);结合X射线衍射(XRD)、扫描电镜-能谱(SEMEDX)、振动样品磁强计(VSM)、透射电镜(TEM)、红外光谱(FT-IR)、热重-差热分析(TG-DTA)等表征手段对制备材料的结构、形貌、磁学性能和稳定性进行分析.结果表明,在5%固液比(质量体积比,5 g/100 mL,以下均表述为"5%固液比")下,经过5 d的外源酸调控生物浸提,分别获得了84.5%、63.2%的Zn、Mn浸出效率;当Zn∶Mn∶Fe=0.4∶0.6∶2.0(物质的量比,即x=0.4)时,制备的纳米级Mn_(0.6)Zn_(0.4)Fe_2O_4性能最优,属纯相的立方尖晶石结构,颗粒分布均匀,饱和磁化强度(M_s)、剩余磁化强度(M_r)和矫顽力(H_c)分别为68.9 emu·g~(-1)、4.7 emu·g~(-1)和53.6 Oe,具有热稳定性和耐酸碱性,有望成为一种新型的水处理磁性材料.     

安全与企业核心竞争力

企业核心竞争力是支撑企业生存发展的根本动力.核心竞争力的不断提升,是企业长久生存和发展的关键.我国安全事故频发,加入WTO和经济全球化迫使我国必须重视职业安全健康非关税壁垒.从企业核心竞争力、安全与核心竞争力的关系以及造成安全生产现状等方面展开论述,并根据核心竞争力的特征以及市场发展现状得出结论,安全必须加入企业核心竞争力的培育中.     

中和共沉淀—铁氧体法处理含镍、铬废水的实验研究

利用中和共沉淀—铁氧体法处理甘肃某稀有金属生产企业产生的含镍、铬废水,同时对该废水的处理工艺条件进行了实验研究。经测定,废水中Ni 2+质量浓度为50mg/L,Cr(Ⅲ)质量浓度为87mg/L。通过实验得到处理工艺的最佳条件:投料摩尔比(Fe2+/(Ni 2++Cr2O2-7))为9,pH=9,温度为70℃。出水中镍、铬均可达到《污水综合排放标准》(GB 8978—1996)中第一类污染物最高允许排放浓度的要求,为中和共沉淀—铁氧体法处理混合重金属废水的工艺条件研究提供了参考。     

崇明东滩湿地沉积物重金属污染的磁诊断

对取自崇明东滩的高潮滩、中潮滩和低潮滩的沉积物柱样进行了磁学、粒度、重金属含量等指标的分析、比较与综合研究. 结果表明:在以粉砂为主的崇明东滩,通过污染负荷指数法进行评价,除低潮滩无污染外,中潮滩和高潮滩均有中度的重金属污染. 选取中度重金属污染的高潮滩沉积物柱样进行粒度、重金属含量以及磁性参数的相关性分析显示,χ_fd,χ_ARM/SIRM与重金属含量和粘土(粒径<4 μm)之间有较高的相关性,并以此建立了磁诊断线性回归模型;χ_fd和χ_ARM/SIRM可作为重金属含量的替代指标.      

南四湖沉积物中有机氯农药和多氯联苯垂直分布特征

通过对采集于南四湖湖区的沉积物柱状样品中有机氯农药（OCPs）和多氯联苯（PCBs）同系物的GC-ECD定量分析测定,并结合²¹⁰Pb同位素定年分析,重建了南四湖湖区有机污染物的污染史.结果表明,样品中OCPs、HCHs、DDTs和PCBs的含量范围分别为1.64～17.9、0.66～12.5、0.24～2.99和7.84～42.8 ng·g^-1.柱状沉积物的沉积速率为0.330 cm·a^-1,平均沉积通量为0.237 g·(cm²·a)^-1,所采集的样品沉积时间为1899～2000年.OCPs和PCBs分别在1960和1970年左右出现浓度峰值,随后含量逐渐下降.污染物来源分析表明,HCHs来源于新的工业HCH和林丹2种工业品,HCH和DDT污染主要源于历史上的使用;PCBs主要来自于造纸漂白过程和焚烧炉排放.生态风险评价结果表明,除β-HCH、γ-HCH和艾氏剂3种污染物在14～16　cm附近、对应沉积时间为1960年左右测试数据略高于风险水平低值,其余污染物的所有数据均低于风险水平低值.整体而言,南四湖柱状沉积物中的OCPs和PCBs含量属于低生态风险水平.     

The Influence of Linear Elements on Plant Species Diversity of Mediterranean Rural Landscapes: Assessment of Different Indices and Statistical Approaches

This paper mainly aims to study the linear element influence on the estimation of vascular plant species diversity in five Mediterranean landscapes modeled as land cover patch mosaics. These landscapes have several core habitats and a different set of linear elements -habitat edges or ecotones, roads or railways, rivers, streams and hedgerows on farm land- whose plant composition were examined. Secondly, it aims to check plant diversity estimation in Mediterranean landscapes using parametric and non-parametric procedures, with two indices: Species richness and Shannon index.Land cover types and landscape linear elements were identified from aerial photographs. Their spatial information was processed using GIS techniques. Field plots were selected using a stratified sampling design according to relieve and tree density of each habitat type. A 50×20 m² multi-scale sampling plot was designed for the core habitats and across the main landscape linear elements. Richness and diversity of plant species were estimated by comparing the observed field data to ICE (Incidence-based Coverage Estimator) and ACE (Abundance-based Coverage Estimator) non-parametric estimators.The species density, percentage of unique species, and alpha diversity per plot were significantly higher (p < 0.05) in linear elements than in core habitats. ICE estimate of number of species was 32% higher than of ACE estimate, which did not differ significantly from the observed values. Accumulated species richness in core habitats together with linear elements, were significantly higher than those recorded only in the core habitats in all the landscapes. Conversely, Shannon diversity index did not show significant differences.     

我国脱硝市场的现状及发展建议

我国脱硝市场任务艰巨,政策扶持将催生爆发性机遇。脱硝产业目前存在缺乏具有自主知识产权的核心技术、绝大多数单位依靠引进技术、市场竞争处于无序状态等问题;提出了发展脱硝市场的应对措施,建议建立市场准入制度和经济补贴政策,加强排放标准制订工作。     

医疗废物焚烧处理核心技术的开发及应用

国内已建成的医疗废物焚烧设施目前普遍存在进料系统不稳定、玻璃结渣和高浓度HCl气体的排放的问题。这些技术难点已成为医疗废物焚烧处置行业发展的瓶颈。本文介绍了可解决上述问题的"可调节医疗废物恒流量进料技术"、"医废焚烧防玻璃结渣技术"和"含高浓度氯化氢医废尾气处理技术"三项医疗废物焚烧处理核心技术的主要特点及技术指标与应用实例。