高温高湿巷道内不稳定换热系数影响因素分析及模型建立*

为研究高温高湿巷道不稳定换热系数的变化规律,采用Fluent软件对高温高湿巷道内的热湿交换进行数值模拟,通过单因素和正交模拟实验探讨风流温度、风流速度、岩石导热系数、原岩温度以及巷道当量直径对高温高湿巷道不稳定换热系数的影响。研究结果表明:高温高湿巷道不稳定换热系数随时间的变化规律与普通巷道一致,均与通风时间呈负相关,但通风时间为1 a的高温高湿巷道不稳定换热系数较普通巷道增加了12.5%。通过单因素分析得到风流速度、岩石导热系数和当量直径与不稳定换热系数呈正相关。通过极差分析得到各因素对不稳定换热系数的影响程度为:岩石导热系数>当量直径>风流速度>风流温度>原岩温度。利用SPSS软件对正交实验数据进行拟合,建立不稳定换热系数的计算模型,拟为高温高湿巷道内热负荷计算及井下风温预测提供参考。     

磁絮凝高效处理高浊度废水的性能及机理研究

自来水供水厂在运行过程会产生大量高浊度废水,其中富集了许多微生物、有机物及无机杂质,若直接排放会严重污染河流水体及周边土壤.采用磁絮凝工艺处理自来水厂供水过程中产生的高浊度废水,通过单因素和正交试验考察了聚合氯化铝(PAC)投加量、磁种(Fe3O4)投加量、废水初始pH值和沉降时间对废水中浊度、COD和UV254去除效...     

氧化-微絮凝-高速过滤应用于再生水生产的研究

以中国北方缺水地区污水再生利用为目标,采用常规滤料双层过滤探讨高速微絮凝、氧化过滤再生水处理技术,试验通过不同的滤料级配、滤层厚度的对比试验;采用3种混凝剂和3种助凝剂做筛选试验,发现采用1#混凝剂,HFO助凝剂做絮凝氧化剂效果较理想,得出高速微絮凝氧化过滤工艺处理城市污水厂二级出水的工艺是可行的。试验装置的滤池单位面积周期产水量为50m3/(m2.h),最佳工艺条件下出水浊度去除率为92.21%,平均浊度为0.889NTU;COD去除率为55.58%,平均为22.33mg/L;PO34--P去除率为84%,平均为0.135mg/L;色度去除率为80.7%,平均为1.45度,完全符合GB/T18920-2002《城市污水再生利用城市杂用水质》要求。     

高温蒸汽灭菌处理技术处置医疗废物工艺设计

高温蒸汽灭菌处理技术是近几年开发的新型医疗废物处置技术,并在全国部分地区得到了应用和推广。以西北某市医疗废物处置工程中高温蒸汽灭菌处理技术的应用为例,通过对其工程原理、系统组成、工艺流程等的分析论证共同探讨其工程原理和性能特点,为今后在工程实际中的运用提供参考。     

一种新型旋风气幕式排风罩数值模拟研究

利用Fluent计算流体力学软件对新型旋风气幕式排风罩工作流场及有害物分布进行了数值模拟,并与传统排风罩进行了对比。结果表明:旋转射流屏蔽作用下的抽吸流场具有中部压力较低和提高抽吸能力的作用;新型旋风气幕式排风罩不仅能有效地控制有害物扩散,而且可以实现远距离捕集有害物及以较小的排风速度排放有害物。     

Database-driven models of the world's Large Marine Ecosystems

We present a new methodology for database-driven ecosystem model generation and apply the methodology to the world's 66 currently defined Large Marine Ecosystems. The method relies on a large number of spatial and temporal databases, including FishBase, SeaLifeBase, as well as several other databases developed notably as part of the Sea Around Us project. The models are formulated using the freely available Ecopath with Ecosim (EwE) modeling approach and software. We tune the models by fitting to available time series data, but recognize that the models represent only a first-generation of database-driven ecosystem models. We use the models to obtain a first estimate of fish biomass in the world's LMEs. The biggest hurdles at present to further model development and validation are insufficient time series trend information, and data on spatial fishing effort.     

Decadal changes in a NW Mediterranean Sea food web in relation to fishing exploitation

We analysed changes in the ecological roles of species, trophic structure and ecosystem functioning using four standardized mass-balance models of the South Catalan Sea (North-western Mediterranean). Models represented the ecosystem during the late 1970s, mid 1990s, early 2000s, and a simulated no-fishing scenario. The underlying hypothesis was that ecosystem models should quantitatively capture the increasing exploitation in the ecosystem from the 1970s to 2000s, as well as differences between the exploited and non-exploited scenarios. Biomass showed a general decrease, while there was an increase in biomass at lower trophic levels (TL) from the 1970s to 2000s. The efficiency of energy transfer (TE) from lower to higher TLs significantly increased with time. The ecosystem during the 1990s showed higher biomass and flows than during the 1970s and 2000s due to an increase in small pelagic fish biomass (especially sardines). Exploited food webs also showed similarities in terms of general structure and functioning due to high intensity of fishing already in the 1970s. This intensity was highlighted with low trophic levels in the catch, high consumption of production by fisheries, medium to high primary production required to sustain the catches and high losses in secondary production due to fishing. Significant differences on ecosystem structure and functioning were highlighted between the exploited and no-fishing scenarios. Biomass of higher TLs increased under the no-fishing scenario and the mean trophic level of the community and the fish/invertebrate biomass ratios were substantially lower in exploited food webs. The efficiency of energy transfer (TE) from lower to higher TLs was lower under the no-fishing scenario, and it showed a continuous decrease with increasing TL. Marine mammals, large hake, anglerfish and large pelagic fish were identified as keystone species of the ecosystem when there was no fishing, while their ecological importance notably decreased under the exploited periods. On the contrary, the importance of small-sized organisms such as benthic invertebrates and small pelagic fish was higher in exploited food webs.     

高氮渗滤液缺氧/厌氧UASB-SBR工艺低温深度脱氮

在低温条件下,采用缺氧/厌氧UASB-SBR组合工艺处理实际垃圾填埋场渗滤液.结果表明,该工艺可实现有机物和氮的同步、深度去除.在进水COD平均为11950.2mg/L,NH4+-N为982.7mg/L的条件下,出水分别为390.1mg/L和2.9mg/L,去除率分别为96.7%和99.7%.同时,缺氧UASB1反应器的最大COD负荷达到13kg/(m3×d),最大COD去除速率为12.39 kg/(m3×d),具有高效缺氧反硝化和高效厌氧降解有机物反应的双重功效, 在SBR反应器的缺氧段和缺氧UASB,反应器内获得了99%以上的反硝化率.对于冬季水温分别为14.9,14.1,13.5,11.05℃的低温条件下,SBR反应器实现了完全硝化和反硝化,出水TN分别为4.1,5.7,14.1,16.5mg/L,达到了深度脱氮的目的.此外,在上述温度范围内,温度对反硝化速率(rN)的影响大于对硝化速率 (rDN)的影响, rN/rDN比值相对恒定.     

镧掺杂纳米材料合成及其高氟选择性吸附特性

采用共沉淀法制备了镧渗杂的纳米镁铝层状双氢氧化物材料(LDHs),获得了一类对氟具有选择性的新型吸附材料.实验表征了LDH、其焙烧产物(LDOs)以及吸附氟后的材料(F-LDHs)的微观形态、体相组成等性质的变化,通过批处理试验和吸附柱试验对其工艺特性及影响因素进行了深入分析.实验结果表明,材料经600℃焙烧10min,在含200mg·l~(-1)SO_4~(2-),氟浓度为10mg·l~(-1)的配水中投加0.1g LDOs吸附240min,最高除氟率可达93.53%;在含200mg·l~(-1)SO_4~(2-)的氟溶液中,镁铝铜LDOs吸附氟的容量高于镁铝LDOs;吸附柱实验中,14h时出水氟含量小于国家标准(1 mg·l~(-1));共存阴离子对材料的除氟干扰强度排序为:Co_3~(2-)>PO_4~(3-)>NO_3~->Cl~-.材料吸附氟后可用0.5mg·l~(-1)的Na_2CO_3洗脱,并经600℃焙烧10min再生,再生4次后选择性除氟效果稳定.     

Analysis of energy recovery potential using innovative technologies of waste gasification

In this paper, two alternative thermo-chemical processes for waste treatment were analysed: high temperature gasification and gasification associated to plasma process. The two processes were analysed from the thermodynamic point of view, trying to reconstruct two simplified models, using appropriate simulation tools and some support data from existing/planned plants, able to predict the energy recovery performances by process application. In order to carry out a comparative analysis, the same waste stream input was considered as input to the two models and the generated results were compared. The performances were compared with those that can be obtained from conventional combustion with energy recovery process by means of steam turbine cycle. Results are reported in terms of energy recovery performance indicators as overall energy efficiency, specific energy production per unit of mass of entering waste, primary energy source savings, specific carbon dioxide production.