体育馆出口疏散能力的实验研究

为研究出口单位流量与人流时间之间的关系,以某体育馆为例,进行对某一出口常态下的人流观测实验.通过理论计算和建立Cubic回归模型对采集数据进行了统计分析.发现:单位出口流量最大值为2人/(m·s),稳定值为0.8-1.2人/(m·s),最小值为0.2人/(m·s).出口单位流量是人流时间的三次函数.研究结果表明:出口单位流量是随着时间的变化而变化,不是一个定值,而且单位出口流量稳定值分布在初期.本文对性能化防火设计有一定的参考价值.     

DEVELOPMENT OF WATERSIIED MODELS FOR TWO SIERRA NEVADA BASINS USING A GEOGRAPHIC INFORMATION SYSTEM1

ABSTRACT: Techniques were developed using vector and raster data in a geographic information system (GIS) to define the spatial variability of watershed characteristics in the north-central Sierra Nevada of California and Nevada and to assist in computing model input parameters. The U.S. Geological Survey's Precipitation-Runoff Modeling System, a physically based, distributed-parameter watershed model, simulates runoff for a basin by partitioning a watershed into areas that each have a homogeneous hydrologic response to precipitation or snowmelt. These land units, known as hydrologic-response units (HRU's), are characterized according to physical properties, such as altitude, slope, aspect, land cover, soils, and geology, and climate patterns. Digital data were used to develop a GIS data base and HRIJ classification for the American River and Carson River basins. The following criteria are used in delineating HRU's: (1) Data layers are hydrologically significant and have a resolution appropriate to the watershed's natural spatial variability, (2) the technique for delineating HRU's accommodates different classification criteria and is reproducible, and (3) HRU's are not limited by hydrographic-subbasin boundaries. HRU's so defined are spatially noncontiguous. The result is an objective, efficient methodology for characterizing a watershed and for delineating HRU's. Also, digital data can be analyzed and transformed to assist in defining parameters and in calibrating the model.     

Profitability of in-plant modifications in pollution control

This case study was developed in view of setting up a demonstration project on “revealing the profitability of clean technology in small-scale electroplating unit”. The research was conducted in a small-scale electroplating shop located in Bangkok. A set of simple in-plant control measures such as dragout recovery, spray rinsing technique and rinse water agitation were implemented. Quantitative data, obtained from the monitoring of wastewater before and after process modifications, have indicated a substantial reduction both in quantity and strength of wastewater generated. Water consumption was reduced by approx. 35% of total rinsing water, which is 19% of total process water consumption. Average metal concentrations in wastewater was reduced 73% for Cr-, 71% for Ni- and 54% for Cu-plating rinse water.     

Water Use by Thermoelectric Power Plants in the United States1

Abstract: Thermoelectric power generation is responsible for the largest annual volume of water withdrawals in the United States although it is only a distant third after irrigation and industrial sectors in consumptive use. The substantial water withdrawals by thermoelectric power plants can have significant impacts on local surface and ground water sources, especially in arid regions. However, there are few studies of the determinants of water use in thermoelectric generation. Analysis of thermoelectric water use data in existing steam thermoelectric power plants shows that there is wide variability in unitary thermoelectric water use (in cubic decimeters per 1 kWh) within and among different types of cooling systems. Multiple‐regression models of unit thermoelectric water use were developed to identify significant determinants of unit thermoelectric water use. The high variability of unit usage rates indicates that there is a significant potential for water conservation in existing thermoelectric power plants.     

THE EFFECT OF DATA INDEPENDENCE IN MODEL CALIBRATION AND MODEL TESTING1

ABSTRACT: With the increased use of models in hydrologic design, there is an immediate need for a comprehensive comparison of hydrologic models, especially those intended for use at ungaged locations (i.e., where measured data are either not available or inadequate for model calibration). But some past comparisons of hydrologic models have used the same data base for both calibration and testing of the different models or implied that the results of model calibration are indicative of the accuracy at ungaged locations. This practice was examined using both the regression equation approach to peak discharge estimation and a unit hydrograph model that was intended for use in urban areas. The results suggested that the lack of data independence in the calibration and testing of regression equations may lead to both biased results and misleading statements about prediction accuracy. Additionally, although split-sample testing is recognized as desirable, the split-samples should be selected using a systematic-random sampling scheme, rather than random sampling, because random sampling with small samples may lead to a testing sample that is not representative of the population. A systematic-random sampling technique should lead to more valid conclusions about model reliability. For models like a unit hydrograph model, which are more complex and for which calibration is a more involved process, data independence is not as critical because the data fitting error variation is not as dominant as the error variation due to the calibration process and the inability of the model structure to conform with data variability.     

UNIT HYDROGRAPHS – A COMPARATIVE STUDY1

ABSTRACT. Unit hydrographs derived by using two methods, linear programming and least squares, are compared. Test data comprise rainfall and runoff information from four storms over the North Branch Potomac River near Cumberland, Maryland. The mathematical bases of these methods for unit-hydrograph derivation are explained. The linear programming method minimizes the sum of absolute deviations, and the least squares method minimizes the sum of the squares of deviations. Computer subroutines are readily available for application of these methods. The unit hydrographs derived with the two methods are practically the same for storms 2 and 3, but differ somewhat for storms 1 and 4. However, the reconstituted direct surface runoff hydrographs are similar to those observed with the exception of the hydrograph for storm 4 which had a relatively more non-uniform rainfall excess of a considerably larger duration.     

DECLINING POTENTIOMETRIC LEVELS IN FORT WALTON BEACH AREA,FLORIDA1

ABSTRACT: The Fort Walton Beach area is presently faced with an excessive drawdown of the potentiometric level in the upper Floridan aquifer. Based on available data, the potentiometric level in the Floridan aquifer has dropped 162 feet since 1936. This declining potentiometric level can lead to problems and possible loss of the natural resource on a long-term basis. However, if corrective measures or programs for proper management of groundwater resources are undertaken at this time, the potential problems may be averted.     

Fitting a Gamma Distribution Over a Synthetic Unit Hydrograph1

ABSTRACT: Several methods for synthetic unit hydrographs are available in the literature. Most of these methods involve the hand fitting of a curve over a set of a few hydrograph points, which can sometimes be a subjective task. Besides, the user often finds it difficult or simply neglects to adjust the generated unit graph to a runoff volume of one unit (inch, cm, or mm). It is the purpose of this paper to present to the design hydrologist a simple method to fit a smooth gamma distribution over a single point specified by the unit hydrograph peak and the time to peak with a guaranteed unit depth of runoff.     

电厂机组大修的安全管理及保障措施

针对电厂机组大(小)修中所遇到的安全管理方面的各种实际问题,提出了针对性强、可操作性强、实用有效的防范措施和管理方法.     

泄漏检测与维修技术在芳烃抽提装置的应用研究

采用泄漏检测与维修（ LDAR）技术进行了全面检测和统计分析，分析泄漏的原因并通过维修减少泄漏。结果表明：芳烃抽提装置容易泄漏的元件主要为连接件和阀门，主要分布在泵区；SV≥5000μmol／mol的泄漏密封点占总密封点数的0.57％，对总泄漏量的贡献达到了82％，是造成泄漏排放的主要部分。设备管阀件泄漏造成的加工损失率为0.0009％，泄漏点停工维修修复率为83％，停工维修后整体泄漏率为0.03％；VOCs减排率为71％。